Peugeot

9378 topics

Page 92 of 188
- Jump to page:
Previous
1
…
90
91
92
93
94
…
188
Next

Announcements

Statistics

Last post

Takata Airbag Recall Documentary

by GiveMeABreak » 06 Mar 2025, 17:55 » in Citroën
1

2

3
First post

Given the number of 'After-sales campaign' notices concerning Takarta Airbags I have been made aware of when looking up parts from PSA for members, I thought I would post a link to the following documentary that may be informative concerning the issue with these igniters.

According to Takata, the chemicals in the airbags’ explosive charge can...

Last post

An 'eejit' in admin has just noticed, and panic'd. Covering backsides. Something might happen! - Then DO something! And 'something' has been done.
It's the way of our present world.

Needless to say, no-one is going to say: It will be fine, just take it along to your nearest Citroen outlet - (hence the DO NOT DRIVE notice) - because then they will...
Replies: 34
Views: 243411

Last post by Stonehopper
23 Oct 2026, 07:21
PSA Electrical Diagrams - Wiring & Symbols Codes Index

by GiveMeABreak » 09 Dec 2023, 17:48 » in Diagnostics

PSA Electrical Diagrams - Wiring & Symbols Codes Index

The following will cover most basic equipment, but will exclude later systems & Tech.

PSA Electrical Diagrams Introduction - Function and Constitution of Codes
PSA Electrical Diagrams - Coding of Functions
PSA Electrical Diagrams - Component Coding
PSA Electrical Diagrams -...

Replies: 0
Views: 186557

Last post by GiveMeABreak
09 Dec 2023, 17:48
Citroen, DS Automobiles and Peugeot Official Part Number Requests

by GiveMeABreak » 15 May 2021, 13:55 » in Citroën
1

…

202

203

204

205

206
First post

Parts Service Announcement - 21st March 2025

Please note that there is a temporary disruption to our 'Parts Service', so we will be unable to provide any official parts for members at the present time. Please refer to the Post HERE for further info

Last post

Disruption to Parts Service

As you may be aware, the consolidation of the old PSA to the Stellantis Group systems has resulted in both a merge of data tools and a requirement to migrate PSA accounts to Stellantis Systems.

This has caused some problems for organisations like ours and the Team are currently looking at the best way forward. This...
Replies: 3080
Views: 1392174

Last post by GiveMeABreak
21 Mar 2025, 10:53
Airbag, Dashboard, Seat Belt & Airbag ECU Repairs

by GiveMeABreak » 24 Jun 2020, 17:01 » in Useful links
1

2

3

4

5

6
First post

Just for members to be aware that airbagteam.com based in the UK are offering a 10% discount to FCF members on any of their services.

The FCF does not endorse any company directly, but thought this would be of use to members.

Full details of their services and the discount can be found here:

Airbag, Dashboard, Seat Belt & Airbag ECU Repairs

Last post

I I gorgot
The car is a citroeng C2 1,6L VTS 2005
Replies: 80
Views: 724659

Last post by FinnCitro
14 Sep 2026, 17:59
New PSA Heritage Parts for Classic Cars

by GiveMeABreak » 11 Oct 2019, 16:18 » in Citroën

First post

Parts for Classic / Older Citroen, Peugeot Renault Vehicles

This may be of interest to Members with older vehicles where getting parts is a struggle and for those not already aware of the site.

PSA are embarking on a project to provide some supplies of original and re manufactured parts for older vehicles and classics, and have made it a...

Last post

anti-virus is blocking.......

Replies: 7
Views: 196766

Last post by Stickyfinger
16 Sep 2024, 21:28
Revised Easydiagnostics Discount Procedure

by GiveMeABreak » 03 May 2018, 17:22 » in Forum News, Announcements and Issues

Please note that there is a new procedure in place for members wishing to take advantage of a 15% discount off products from Easydiagnostics.

The old discount code that was entered into the checkout is no longer valid, as a result of the code being propagated over the Internet.

After discussions with Jim from ED today, we have agreed a new...

Replies: 0
Views: 155237

Last post by GiveMeABreak
03 May 2018, 17:22

Topics

Statistics

Last post

Replacement ecu

by bigdfromthec » 14 Oct 2015, 00:35

First post

Hello I have a 2006 607 2.2hdi(170). I was getting a lot of trouble with faults all coming on at the same time. Dpf seat belt pretensioners brakes,power steering,immobiliser. It was traced back to a faulty injector on number 1 cylinder which was replaced. And in doing so it spiked the ecu. I have sent the ecu to a specialist and they have...

Last post

This mob, BBA reman, may be worth a call too...

Here's their Peugeot-specific ECU faults page..

Replies: 2
Views: 492

Last post by CitroJim
15 Oct 2015, 10:40
bleeding 407

by Peugeot_Russ » 12 Oct 2015, 01:09

First post

Hey all. Well I bled out my brakes today but found the brake pedal has softened and has more travel on it. I did not use the diagbox software. Where do i find this in Lexia? i've looked under diagnosis, repair, maintenance, cant find anything.

Last post

I don't like that abs unit. It seems to cause problems on most cars that have it. It was well known on the Merck.
I thought about the 1AM bit too but then I looked at the profile. I live all alone in my own time zone and seldom go to bed.

Replies: 13
Views: 2023

Last post by BX
13 Oct 2015, 22:09
1.4 HDI turbo oil feed pipe

by doctle » 08 Oct 2015, 23:48

First post

Hi Guys
I have a 1.4 HDI turbo oil feed pipe seems to be leaking at the flexi part. Has anyone repaired this even on a temporary basis? I cant afford a new pipe at the moment and I'm tempted to clean it and cover it with EP200. I know this would make it solid but the new ones are solid too. Any suggestions??

Last post

Yes he just swaged in a new piece of flexible steel braided pipe. He said it was a regular request for tractors etc I was just wanted a piece of oil resistant hose to keep it going until i got the real thing but the job he did left it like new again. Anyway €35 for a dealer part is good. I think it was much more expensive from Ford and they didnt...

Replies: 5
Views: 1642

Last post by doctle
10 Oct 2015, 09:01
107 Airbag light flashing.

by spiketheguru » 08 Oct 2015, 16:49

First post

Hello all

Ive a 2006 airbag light flashing and wondered is it a big job to get it reset.

I realise that it could be any number of things causing it,its on a Peugeot 107 that ive recently bought and im not sure where to start.

Thank you in advance :-D

Last post

Try wiggling the connections below each seat.

Sent from my GT-I9300 using Tapatalk

Replies: 3
Views: 10135

Last post by daviemck2006
08 Oct 2015, 19:58
406 2.1td starter motor funny business

by djoptix » 26 Sep 2015, 19:09

First post

Having all sorts of fun with my (ahem) bargain 406. Some other stuff which I'm dealing with but I'd welcome some ideas on this one :)

The other day, it started making a very odd grinding noise. This started happening while driving. I wasn't going far so I got there, parked up and investigated. I quickly worked out that the starter motor was stuck...

Last post

Well done. That's strange one but you never know - I used to be a TV engineer. :?

Peter

Replies: 9
Views: 718

Last post by Peter.N.
07 Oct 2015, 16:08
Peugeot 307 Lower Engine Mount

by Bannedbiker » 03 Oct 2015, 22:48

First post

The lower engine mount seems to be a common problem with some Peugeot and Citroen models. When I had a Xantia a few years ago I replaced the rubber bush part of the mount by cutting the old one out and pressing a new aftermarket replacement with a large vice.
So when I bought my 307 a couple of years ago, the lower engine mount was one of the...

Last post

My mistake, the polybush mount is made by Powerflex, not Superflex.
Nice to see someone else has had one for a couple of years.
I was expecting a silicone grease to be supplied, a friend of mine with a Triumph GT6 used silicone grease with his polybushed suspension.
However, the supplied lubricant was copper grease so I used that. I'll probably...

Replies: 10
Views: 3757

Last post by Bannedbiker
05 Oct 2015, 22:11
Peugeout 107 Black Box fitting

by michael maurice » 25 Sep 2015, 22:30

First post

My daughter has an O6 Peugeot 107 which shes been given a Black Box 'Telematics' to fit. She's not anyway near me so left it to her boyfriend to fit.

Trouble is they don't know if its fitted correctly. The connector as far as I can tell is under the lower steering column shroud.

They plugged it in somewhere and it supposedly lit up but their...

Last post

If it has been given to the user to DIY fit id be fairly certain it plugs straight into the OBD socket. Are there any LED's that light up when its plugged in to at least show its powered up ?

Replies: 8
Views: 2562

Last post by wheeler
02 Oct 2015, 10:27
306 HDI non starter and flashing glow plug light

by Pug Nutter » 27 Sep 2015, 23:54

First post

Hi everyone, My beloved 1999 306 HDI 90 will not start and the glow plug light flashes on and off briefly for around two minutes after the ignition has been switched off accompanied by a clicking / screaming sound from the brown 15 pin relay behind the ECU. I have plugged a couple of scan tools in. A cheap one tells me I have a problem with TPS...

Last post

Thanks very much CitroJim, you're a star!. I've now printed your diagram and will get my multimeter out and your diagram when I get back from work tomorrow night.
Thanks again for your help.

Replies: 5
Views: 986

Last post by Pug Nutter
30 Sep 2015, 00:23
Practical Classics

by Pug_XUD_KeenAmateur » 24 Sep 2015, 21:59

First post

interesting article in this month's Priactical Classics' for Pug fans such as myself. A group test of 'luxury cars which include a Pug 604 and Renault 30'. Good on 'em for 'thinking outside of the box' and giving us something 'out of the ordinary'. There's a 309TD in the Staff Car Saga's too.

Mods: not sure about effectively 'plugging' PC, here,...

Last post

The keypad has lost communication with the ECU... Check connections and then disconnect the battery for an hour or so before reconnecting it and trying again...

If that does not work, a good search of this forum will reveal topics covering similar problems with the keypad.

Replies: 5
Views: 706

Last post by CitroJim
27 Sep 2015, 04:14
Interchangeability?

by JohnD » 05 Dec 2002, 01:02

First post

I have an XUD11, an XUD9 and also a TUD5 and I can tell you that cambelts, gloplugs and fuel filters are different on all three vehicles. The only bright spot is that they all use the same oil filter.

Last post

Please do not post a query in more than one thread!

But thanks all the same for a walk down memory lane. One of my posts from 2002... Great archive system. 8-)

Gosh John, I did not realise the age of that thread :-D

Shows how carefully we look after the forum database!!!

Replies: 9
Views: 1078

Last post by CitroJim
26 Sep 2015, 15:47
Can I Power my Welder from a Petrol Generator?

by Pug_XUD_KeenAmateur » 03 May 2015, 11:17

First post

Hi, anyone know whether I can power my welder from a petrol generator?

the sort of thing you can acquire from any hire shop for about 25quid a day?

Welder is a Clarke MIG 151 EN and steel is 1.2mm thick.

Or maybe there's an existing thread here where somebody's already asked, that someone can point me in the direction of (having had a look...

Last post

You have nice people next door :)

Replies: 9
Views: 970

Last post by Stickyfinger
24 Sep 2015, 22:00
405 diesel estate n reg

by speedy3 » 02 Sep 2015, 20:54

First post

hi all i've got a 405 diesel estate on an n registration and the immobiliser keeps on cutting in is there any way of bypassing it would appreciate any help please

Last post

just to say, I'm also the owner of a 'n' plate 405 D estate, I've run two 405's as daily drivers since 2006 and also have a source of spares, some of which are starting to become scarce. Feel free to ask for help or advice

Replies: 3
Views: 554

Last post by Pug_XUD_KeenAmateur
24 Sep 2015, 21:55
Peugeot 307 1.6 TU5JP4, Tap,Tap,Tap,Tap......

by Bannedbiker » 22 Sep 2015, 21:49

First post

Hi all,
Having a little issue with my 2003, 53 plate Peugeot 307 1.6S. It has the TU5JP4 petrol engine.
A couple of months ago a tapping noise started, like a noisy hydraulic cam follower.
I hoped it would fix itself but it carried on.
Two weekends ago I thought I'd remove the cam followers, dismantle them and clean them out. Result, still...

Last post

You fitted the wrong tap washers?

Almost. :)
They say to check the simple things first.
The noise the engine was making sounded exactly like every one I've heard with a noisy tappet.
Like a Chrysler Alpine in fact.
When I went into work today and said what caused the noise they were all open mouthed.
Last night I stood there in front of the car...

Replies: 3
Views: 3013

Last post by Bannedbiker
24 Sep 2015, 18:09
Peugeot 206 fans

by imperial21 » 24 Sep 2015, 11:39

Hi
I am just sorting out a 2003 1.1 206 for my step daughter, done the mot work but now have the next bunch of problems neither the heater fan or the radiator fan work, from what i have found the radiator fan is seized and the relay wiring is well past its best so i have bought another fan with the wiring.
My second problem is the heater fan is...

Replies: 0
Views: 429

Last post by imperial21
24 Sep 2015, 11:39
406 hdi throtle pedal ??

by leeroy99 » 21 Aug 2015, 19:43

First post

hi all,

had my 406 110 hdi for a while now and hadn't really noticed but a few people have drove my car
& all commented on my accelerator been hard to press ?
ive since drove my friends 406 and throttle is very light and feels more responsive to myn ??

just wondering if anyone had any advice much appreciated thanks. :-D

Last post

little things make a big effect :).....gj

Replies: 6
Views: 667

Last post by Stickyfinger
19 Sep 2015, 21:17
206 rear axle change

by imperial21 » 18 Sep 2015, 18:19

First post

Hi
i am going to change the rear axle on a 1.4 2003 206.
It looks quite straight forward to do but i wanted to check whats best done about the brake compansator, is it best just to connect up the one on the replacement axle, as it should be sent up rather than use the original ? i expect both a seized but that thats no problem !!

Last post

I am guessing that its seized, they are easy to free off which i will do before its fitted.

Replies: 2
Views: 457

Last post by imperial21
18 Sep 2015, 22:31
NSR Brake Locked on after Bump in Road

by Pug_XUD_KeenAmateur » 13 Aug 2015, 12:56
1

2
First post

My N/S/R Brake locked on after I went over a slight pot-hole. It’s a Drum brake on a 405 estate.

It locked on for approx 3 or 4 seconds and brought me to a swift stop from about 25mph, with a severe smell of burning rubber from the affected tyre, I’m pretty sure that the O/S did not lock up, hence the slight swerve caused. By the time I’d...

Last post

just a mention to say that the problem re-occurred a couple of days after loosening the handbrake cable, which seemed like a bit of a rubbish fix really and I finally traced it a couple of weeks ago to...

a tyre gone 'hard'. First thing when the tyre was cold it was simply not working as it should over really only very minor bumps, causing a...
Replies: 17
Views: 1783

Last post by Pug_XUD_KeenAmateur
16 Sep 2015, 15:25
PEUGEOT 407SW - Electric mirrors

by kettlesimon » 14 Sep 2015, 21:20

First post

I have a 57 plate 407SW and today the electric mirrors developed a mind of their own, turning in and out at will and now finally stuck in. Any ideas of where to start or likely causes. Any help most welcome.

Last post

Dirty switch in the door ?....I cleaned one once and it was full of horrid stuff.

Replies: 1
Views: 349

Last post by Stickyfinger
14 Sep 2015, 21:22
Peugeot 207 repeated rear light cluster issue

by ashy90 » 08 Sep 2015, 20:12

First post

My mums 56 plate Peugeot 207 keeps every so often beeping and coming up with rear lights defective. Sometimes I find a bulb has blown, other times all bulbs are working fine. In can be fine for ages and then start it all again. When I looked at it today it gave warnings for every single rear bulb on the left hand side rear light cluster being...

Last post

Had a big dose of this with a VW Caddy. Better still when it detects a fault it disconnects the power from that bulb and will not switch it on again until the offending light is turned off and back on again. Various tail lamps brake lights and front side lamps not working in a total random selection. In the end I gave a thorough clean to all the...

Replies: 5
Views: 7486

Last post by BX
10 Sep 2015, 23:10
Bing [Bot]

by peugaultcitroman » 02 Sep 2015, 23:31

First post

Hi . . . . How's it going ?

Last post

You won't get much of an answer from Bing. It is a robot user that logs in to check for new posts and update the Bing search database (other search engines do the same thing) the in the user name is a clue that it is not a real person.

Replies: 1
Views: 393

Last post by xantia_v6
03 Sep 2015, 02:27
206 1.9 d

by xdever » 21 Aug 2015, 09:26

First post

Hello everyone. I have a problem with my peugeot 206. Its a 1.9 d WD8 69bhp. Now i heard a lot of ppl say they have knocking sound on cold motor but for me its the other way around. Driving on the motorway just before i got off it the engine got realy loud... anyway i got to my destination, went to work... after 4 hours. Went started the motor on...

Last post

I will get a redex fuel sistem cleaner! I wasnt expecting fuel to be a problem for a mono injection but it seems it is !!!

Replies: 8
Views: 1355

Last post by xdever
30 Aug 2015, 12:16
Another reverse switch issue - mechanical problem?

by StuY » 07 Aug 2015, 13:33

First post

The reversing lights on my 206SW (2004) were not working, and I traced the fault to the switch (so I thought). If I unplugged the connector from the switch and shorted out the contacts, the lights come on. I removed the old switch, with some difficulty as the head sheared off while I was unscrewing it. I have tried two replacement switches of...

Last post

I suppose the big question is: how knacked is the gearbox when the reverse lights stop working?? :? :)

Good fix, I really wasn't sure what you could do about that.
I suppose if your gearbox sounds and feels alright and is on fresh oil it's ok, hopefully.

Replies: 5
Views: 1419

Last post by elma
28 Aug 2015, 14:56
207 1.6 VTi thermostat

by PopPops » 26 Aug 2015, 12:36

First post

Hello, I hope this topic hasn't been covered before, but I could find no reference.

My wife's 10 plate 207 Automatic (genuine 12k miles and in immaculate condition) with the 1.6 VTi engine has just flagged an engine management system faulty problem. This happens immediately from start-up. We are in France at present and the only clues to the...

Last post

Check the Lexia owners thread, there might be someone nearby with Planet.

Replies: 1
Views: 1207

Last post by Gibbo_Wirral
26 Aug 2015, 13:28
Pool of diesel around injectors

by Dcourt » 20 Aug 2015, 20:30

First post

My partner said she saw smoke coming from the engine so I had a look and found pools of diesel around the injectors! The car runs fine! And I have recently had new injectors put in a few months ago! Any one know what this could be?

Last post

Sounds like it might be the leak off pipes! Anyone know how much a set of leak off pipes is?

Replies: 7
Views: 2179

Last post by Dcourt
24 Aug 2015, 20:54
806 facelift headlight modification questions

by austinmaxi555 » 22 Aug 2015, 13:39

Does anyone know if its possible to fit the 806/ulysse/synergies headlights grill and bumper to a expert dispatch etc and vice versa. It looks possible if the panel that the headlights bolt to is changed as well but does anyone know for sure. The reason I ask is I have been given an accident damaged facelift 806 and am really struggling to find...

Replies: 0
Views: 520

Last post by austinmaxi555
22 Aug 2015, 13:39
407 1.6HDi No Power, Black Smoke

by Nelix » 14 Aug 2015, 12:08

First post

Hi

I have the above vehicle and am having a few issues, here is the story:

I bought the car as a non runner, after towing the vehicle home I put a new battery on it and it started first time!!!! However when driving it had no power under 2500-3000 revs. After a few days of driving it lost all power and would not rev over 2000-2500 rpm, it did...

Last post

Fitted new MAF and worse than it was, revs at idle constantly fluctuates between about 550 upto 900, up and down, up and down.

When the MAF is unplugged it sits nicely at 800

Strangely, when it was first started after fitting it ran great...... For about 30 seconds, reved much better too

Replies: 4
Views: 1648

Last post by Nelix
21 Aug 2015, 07:13
How to buy an ABS pump

by Peugeot_Russ » 11 Aug 2015, 21:32

First post

Hey all, well i need a new ABS pump for a 407. I'd like to know about buying one on ebay.co.uk. does the pump come with its own ECU or its that a separate unit? Will i have to do any work with it using Lexia? Its a used one im getting. thanks.

Last post

I took a chance and bought it. the price was good. I hope it works. Waiting for shipping

Replies: 6
Views: 684

Last post by Peugeot_Russ
20 Aug 2015, 21:55
Peugeot 605 Bottom Radiator Hose, 2.0 Turbo engine

by daggers1980 » 20 Aug 2015, 20:43

Hello all,

I was hoping that somebody might have a bottom hose to fit a Peugeot 605 2.0 Turbo petrol engine - I have a Citroen XM 2.0i (V-reg) and I understand that the engine parts are largely interchangeable. The part code is 1351W9. The fitting going into the radiator is a bayonet-type.

Any help anyone could give would be much appreciated!

Replies: 0
Views: 541

Last post by daggers1980
20 Aug 2015, 20:43
205 gti speedo cable

by daviemck2006 » 15 Aug 2015, 20:35

First post

Can anyone look up the part number for a speedo cable for a 1990 205 gti please? The car is not here so I can't look at it, but I probably can lay my hands on the v5 if you need a chassis number. Thanks.

Last post

I've not driven it yet. I'll probably get the job of taking it for its mot some day soon. I shall spill the beans on how it goes once I drive it

Replies: 7
Views: 891

Last post by daviemck2006
20 Aug 2015, 19:39
508 glovebox light

by 407iain » 31 Jul 2015, 13:40

First post

Hi guys, I currently own a 2011 508 GT.
I've noticed the glovebox light isn't working. I've taken the fitment out and tried it in the boot and it works ok.
So what does this mean?, is there a dedicated fuse for this as everything else seems to work fine. All the courtesy lights, sidelights, DRLs, headlights, numberplate lights etc.
I have an...

Last post

Well I am officially baffled.
I've checked everything I can with this, but there is no 12v power getting to the glove box light plug. According to my multimeter and the boot fixture I plugged in to it.
Literally everything else works.
I'm tempted to run a fused line from the fusebox to the fixture and fix it that way.

Replies: 8
Views: 1200

Last post by 407iain
20 Aug 2015, 18:28
Peugeot Diag 2000

by kitchD6C » 18 Aug 2015, 18:00

Hi all,

Just unearthed a couple of these from the workshop:

No leads, cables or anything, just two units (one's dirty, the other's brand new). Done a bit of searching on Google, looks like it's Lexia-related. Any ideas? Was going to bung em on eBay and see if I got £3 or something for them, but if they might benefit me I'll keep 'em!

Cheers

Replies: 0
Views: 615

Last post by kitchD6C
18 Aug 2015, 18:00
Anti pollution fault

by Dcourt » 19 Jul 2015, 15:56
1

2
First post

Hi I have just had the engine management light come on and an anti pollution fault come up on my 307 2.0 hdi! The day before I lost power and was restricted to 3000 rpm! Could anyone advise/help me on this problem

Cheers

Last post

Not done one on a 2.0 16V, but shouldn't be too hard - think it's just an element rather than a complete unit (as it is on the 1.6). Take the top off, lift the filter out, fit the new one, top back on, give it a good priming on the hand pump, and away you go.
Replies: 25
Views: 1997

Last post by RichardW
13 Aug 2015, 13:13
XUD Turbo Return to Idle Shaking

by Ian_Fearn » 01 Aug 2015, 19:14

First post

Hi there, i'm a long term XUD owner but until recently have rarely need to touch one other than basic servicing.

I own a Talbot Express camper that I fitted a 306 D Turbo engine (1998 car) into a couple of months back. I swapped over to the old fully mechanical bosch pump complete with injectors etc and have ran it for about 3000 miles over the...

Last post

I recently replaced the N/S engine mount on my n/a XUD 405, which was 'clonking', especially in reverse. I initially 'ruled it out' as the source of the clonk as it seemed fine to view and I couldn't get any play out of it, levering it with a small jemmy. I un-necessarily replaced the Suspension D Bush on that side instead.

t' was only a fiver...

Replies: 10
Views: 1128

Last post by Pug_XUD_KeenAmateur
13 Aug 2015, 13:10
407 Heating and Sluggish drive

by Peugeot_Russ » 21 Jul 2015, 23:49

First post

hey all, how's it going? today and a few weeks ago i've been noticing an increasing problem with my 407. It starts up and drive fine for about 25 mins non-stop. the engine and coolant gauges are half way on their respective circles and dont increase. Then with further driving, the car suddenly:

1. begins to drive heavy and engine power is...

Last post

I just found out that its the ABS pump has an intermittent fault with voltage so that may cause the brakes to bind. Im looking for a used one on ebay.

Replies: 2
Views: 680

Last post by Peugeot_Russ
11 Aug 2015, 21:26
206 gearbox or driveshaft fault ????

by imperial21 » 04 Jul 2015, 18:21

First post

Hi All
I have a question about a 1.1 2001 206.
I have changed the clutch, after i have now noticed a problem With the car jacked up the o/s (driverside) drive shaft is not turning as it should. its sort lumpy,and it turns but stops and starts every so often ?
I am wondering if the center drive shaft isnt right ? It was seized in its housing but...

Last post

Hi
been a while i have left the car in the sin bin in the garden but its time to look at it again, How easy is the clip/spring to get at ? could it be looked at while in situ ?

Replies: 5
Views: 742

Last post by imperial21
08 Aug 2015, 21:38
Peugeot Partner 1.6 HDI 75 Noise and Cam Followers

by am_pcn » 23 Jul 2015, 22:42

First post

Evening Everyone,

We run a Peugeot Partner 1.6 HDI 75 2010 with 93k miles. We had the van for about 2 1/2 years and it's always been serviced.

Out of the blue it started to make a odd tapping noise a few minutes after its started, no other symptoms.
We took it in to Peugeot dealer who suggested that they think it's down to the cam followers and...

Last post

Ah, that sounds like low oil pressure at start up due to the sump strainer being blocked - is there a history of a new turbo being fitted?. I would drop the sump pronto, remove the oil pick up and rip the strainer out. Change the oil and filter, and then change the oil every 5-6k and it should be OK - although if you don't know for sure I would...

Replies: 4
Views: 5633

Last post by RichardW
04 Aug 2015, 21:44
peugeot 807 parking sensors

by simonmark » 03 Aug 2015, 18:42

First post

Does anyone now how to repair reversing/parking sensors.Or is there anybody in Teesside area with a diagnostic fault analyser?

Last post

Check the Lexia / Planet map thread. I know of someone in Thornaby.

Replies: 1
Views: 569

Last post by Gibbo_Wirral
04 Aug 2015, 14:28
Idle

by froggy » 27 Jul 2015, 09:50

First post

Hi, my wifes Peugeot 306 , 1.4 petrol (2000) struggles to tick over , she has to keep revving the engine, to stop it stalling ! not fun at traffic lights ! any ideas anyone ? any help gratfully received, Terry

Last post

Remove and clean the stepper motor (idle control valve),its housing,and intake flap with carb` cleaner.If that does not solve the fault the motor may need replacing and the ECU reset with a Diag` tool.

Replies: 5
Views: 683

Last post by Oldpug
02 Aug 2015, 09:59
Peugeot 307 hdi 90 thermostat housing

by rich201283 » 01 Aug 2015, 08:23

First post

On my Peugeot 307 hdi 90 the thermostat housing cap keeps weeping slightly, I have already changed the cover and thermostat and seal and it appears to last a couple of weeks the leaks again, anyone have any ideas what to do next?

Last post

If you have replaced both parts of the thermostat, could the problem be related to excessive pressure build up not being released by the coolant reservoir cap and the thermostat housing happens to be the weakest link?

I'm no expert mind, just a thought!

Replies: 1
Views: 538

Last post by red_dwarfers
01 Aug 2015, 21:45
alternator belt failure, engine does not run on battery alon

by Raul » 26 Jul 2015, 18:51

First post

The alternator belt failed today on my Peugeot 205, so I removed the shredded belt completely and wanted to drive home. I have a xud diesel ( 1.9 td ) and I thought it should drive on battery alone without problems. After about 3 miles it starded to die , I managed to run about 3 more miles but I noticed that water temperature was climbing up - ca...

Last post

The engine is running, a little bit rough and smokey on the start up but it was also that way before the cam belt failure. Maybe a little more smokey than before but I am not sure. One thing I noticed that my alternator belt started to shred again. When I swapped the 1.8 xud 7 for 1,9 td xud 9 then I saw that the latter had different timing belt...

Replies: 6
Views: 820

Last post by Raul
30 Jul 2015, 21:49
Dw8 annoying faults in 52reg expert van. Help needed please

by austinmaxi555 » 30 Jul 2015, 12:14

First post

Hi guys. About two weeks ago I purchased a 52 plate expert. On the drive home about 150 miles in the engine management light came on and the engine developed rather loud diesel knock. Apart from being noisy it has been almost perfect until yesterday when the engine management light went out it wasn't until later that I noticed that my temperature...

Last post

Cheers!! I have fired off a pm to a local lexia member... Fingers crossed I can now stop the van falling apart all around me....

Welcome aboard. :welc: Don't sneeze!

Replies: 6
Views: 695

Last post by Hell Razor5543
30 Jul 2015, 19:46
Looking for Speedo Cable

by xsaras4ever » 08 Jul 2015, 18:02

First post

Hello to all from Bretagne,

we cannot find a speedo cable anywhere on-line for our 1999 Peugeot Boxer 230P, 1.9td, RHD.

Can anyone help - Peugeot main dealers has been suggested but it would probably cost an arm and a leg.

Its the type that is held into the gearbox by a long rubber clevis-pin type of thing.

Thanks in advance.

Last post

Hello again and thanks for the reply.

We tried everywhere, and Malcolm Lockwood.

No luck anywhere, even New Zealand and Australia.

Just when we were comtemplating a Speedo Cable Repair Kit, a chap put one on eBay UK.

He gets then made and sells them. He had the same problem as us a few years back.

Cable arrived and fitted - nice quality....

Replies: 2
Views: 479

Last post by xsaras4ever
28 Jul 2015, 12:54
Peugeot Planet diagnostic

by ColinJ » 26 Jul 2015, 20:23

First post

Hi Everyone I'm new on here,does anyoneof you guys know anyone in the Midlands who have one of these machines

Cheers.

Last post

Ask and look :)

Replies: 1
Views: 550

Last post by Stickyfinger
26 Jul 2015, 20:51
Peugeot 406 coupe radio code

by bxzx16v » 23 Jul 2015, 17:17

First post

I had to charge the battery on the 406 last week and I don't have the code for the radio .It's not in the service book or any handbooks that are with the car. It was imported from holland when new and a UK book pack purchased from a dealer . It's not a hardship listening to the V6 burble but some tunes would be nice .

Mark

Last post

Thanks both I'll look into it .

Mark

Replies: 3
Views: 1005

Last post by bxzx16v
24 Jul 2015, 14:48
2.7Hdi Coupe looses water and gains water pressure

by PietHenning » 06 Dec 2014, 12:51
1

2

3
First post

Hello, I'm new here. I own a 2006 Coupe 2.7 Hdi. Great car.
I bought it with 80000 km on the clock. Previous owner received a new engine at 72000 km. They also replaced the front turbo. I have all documents that shows it. The new engine (only main engine) has a warranty of 20000 km and there is still halve of it left. The car is on 85300 km now....

Last post

What a miserable read :( glad to see it may now be coming to a generally satisfactory conclusion however! :D
Replies: 33
Views: 4922

Last post by wurlycorner
23 Jul 2015, 08:36
5008 - electronic handbrake and changing front pads

by woodmd2 » 21 Jul 2015, 08:22

First post

Hi all,

I have a 2013 Peugeot 5008.

I've driven down to Spain yesterday and found one of my front brake now to be grinding badly.

Local Peugeot garage want 466 euros (£350) to carry out the work for pads and discs. Feels like an outrageous price, but my recovery company are telling me that is the normal price for Spain. So I'm stuck, and have...

Last post

HI Martin, welcome along...even if not under ideal circumstances!!

5008 is basically the same under the skin as the C4 Picasso. So, handbrake only works on the rear, and there is no need to screw in the front pistons. Seems unlikely that a 2013 car would need new discs, unless it's done mega miles, or you've wrecked the disc by running the pad...

Replies: 1
Views: 2242

Last post by RichardW
21 Jul 2015, 12:25
207 1.4 petrol no power when cold.

by Pday1982 » 17 Jul 2015, 21:09

First post

Hello, I've got this 207 and when cold it has no power at all and runs lumpy! Any common faults on this at all?? Your help would be great! Cheers Pete.

Last post

A quick guess would be ignition coils, but it's better if you can have it diagnosed using either Peugeot Planet or Diagbox equipment (or the counterfeit version).

Could end up being simple as valve adjustment too - hence the need to eliminate possibilities with a diagnostic session.

Replies: 1
Views: 520

Last post by addo
19 Jul 2015, 20:12
307 bulb failure

by speedy3 » 15 Jul 2015, 07:18

First post

hi everyone i'm after some advise im a mobile mechanic and before you start laughing it's got me to the stage where I feel like putting a bomb under it
one of my customers has just bought a 2007 56 plate 307 and for some reason it keeps on blowing n/s/r indicator bulbs after a few flashes and the n/s/r/ brake light bulb flashes when you drive...

Last post

Yep.

Replies: 7
Views: 788

Last post by Peter.N.
16 Jul 2015, 15:02
Fuel leak partner 1.9d

by Pday1982 » 14 Jul 2015, 19:56

First post

Peugeot partner 1.9d 1997. The leak is coming from the throttle shaft out of the pump. Has anyone ever changed the seal?? Also I can't find any one who sells the repair kit!! Your help would be appreciated!

Last post

I haven't vetted these, just did a quick google to give an idea how widely available they are.

onclick= window.open(this.href);return false;

Replies: 4
Views: 524

Last post by MikeT
15 Jul 2015, 10:58
rear brake drum type?

by creon » 04 Jul 2015, 12:04

First post

onclick= window.open(this.href);return false;

trying to repair binding brakes on the rear, the cylinder is leaking so im going to replace with a full brake kit from eurocarparts for £50

could someone please advise what system i have as dont want to be ordering the wrong item.

i presume because non abs its 180mm diam and a bendix system

this...

Last post

Chances are the other end of the pipe will be OK, so best just to sacrifice it, and get a new one made up - std flare so should be easy to get hold of. Even if you get the union going, it's probably welded to the pipe, and you will end up mashing the nut as you try and get it out (and back in).

Replies: 7
Views: 696

Last post by RichardW
13 Jul 2015, 12:48

9378 topics

Page 92 of 188
- Jump to page:
Previous
1
…
90
91
92
93
94
…
188
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum