French Car Forum

Th CD lens on these units ages really quickly - not so bad for reading music files, but for data this can be really bad.

These older units don't have a USB, but I believe a cable can be obtained from the Peugeot dealers specifically (not Citroen). Depending on your existing firmware version you may have the USB functionality, but not for V7.*.

I...

On my RT3 Navidrive with only the internal telephone and using my iPhone I did this:

Get a compatible SIM card and slot that into the RT4. Then on your mobile phone, create 2 contacts, let's say 'Car Divert' and 'Car Undivert'.
On the 'Car Divert' contact, enter **21* followed by the RT4's SIM card Telephone number and then a # e.g....

Right - Andy has another X7 with RT4 - I've deleted the previous posts as they are no longer relevant seeing as we were talking at crossed purposes about the RD4 in his original X7.

So the advice applies that I have already originally stated about using the divert tip to get your mobile calls on the RT4.

So first thing happened when i tried to change the hard drive, the cd drive didn't work after that
I couldn't change the hard drive either, i used a ide44 pin to compact flash adaptor and a compact flash , actually 2 adaptors, i know what slave/master means
i put everything as it was
Cd player still dead
After 2 weeks or so the unit died
Now...

It will say 'Navidrive' clearly on the manual - but the PDF I have is the same that I've sent you a link so that you can download.

Indeed, managed to enable that option with Mirascripts

Yes, it's near a nature reserve IIRC. Worth knowing though and handy as it's near to you, so will save a bit on insurance and postage costs!

Ok, issue resolved.
I was pretty sure this cannot be done with the lexia. Too few options there. I guess the initial programming of the RT units was carried in Magneti Marelli at a deeper level as the configuration files have few times more flags than you can edit with the lexia.
Anyway, I looked at the mirascripts to see if there is a flag...

The front panel/facade is interchangeable and the head unit behind is the same. If you have the old facade, it is a matter of 2 minutes to change them. You can do it without unplugging the head unit from the car, just sliding it forward few centimeters. And this is definitely an RT4 unit. There are 3 types of labels for that - RT3 X3-N3/ RT3ev and...

Caution needs to be exercised though, as invariably these will not be original discs, but copies and the risk of bricking a unit increases significantly, potentially costing £000s to repair.

Phew, not much happening then!. Have noticed battery status unit on sons C4. Apparently a new battery was fitted recently as was to my mk1 C5, maybe a swop might be in order as my one is a known age (3mths) and quality.
Deeply in your debt for info, I do like to know how things work.😃
Amongst all the babble above, I completely forgot to mention...

Well, looks like car electrical components are totally ok, except: webasto relays cold be someway burned, ralays wont work like should. When i connect those wires (red circles) direct ac and blower works fine?! Really weird thing??!! What could burn those relays while installing wires?!! I have not touched those wires?? DSC.JPG

That's great!

And yes, they're an absolute pleasure on the motorway; you arrive more relaxed than when you've set off :-D

Hard to say Elis without ripping the 2 apart and looking at the guts - but they no doubt had to rearrange some things to fit the Bluetooth module in and the different graphics chip maybe.

FM is a tricky one - sometimes around Cardigan Bay my FM is like listening to LW out at sea, (either that or the Russians are jamming me)! Other times further...

So you have MyWay then not RT6! That will explain it. I thought you were referring to the eMyWay. Do as Elis says, the content has to be right for it to be recognised.

I've split this off into the telematics section Bandit - as it helps others locate relevant info more easily. :wink:

The Citroen offerings were the AutoDAb and EZI-DAB systems. Basically the same as the Alpine systems. There are 2 choices - an add-on unit (the EZIDAB) that sticks out the dash separately controlled (a bit naff if you like the OEM...

Ive an rt3 in my 407, I bought a new disc, it loads fine, but I dont use it. I much prefer using my little 4 year old garmin satnav. Its easier to use taking post codes that the rt3 wont.

Thanks very much, Marc. I'm on vacation in Britain right now but I'll give that a try when I get back home.

Are you sure it's RT5? Does it have Bluetooth? If not its RT4

Although the same discs should work, the cables though are different

The first thing is to check that you have enabled the AUX option in the setup menu. I had to do this on my NG4 Navidrve 3D system first before it would be shown as an option in the Media Menu. I know you have a different system, but check about in the setup menus first - do you have a VIDEO menu in your setup screens? If so, try there first. If...

Mike - I'm sure if you forced a clean boot from CD 8.31 it would set everything back. It's absolutely critical that you get your firmware updated before a map update that requires it. I cannot understand why you didn't get the 8.31 firmware upgrade with the maps if you bought these - they are usually supplied. I can vouch for this on the NG4...

The only unit that's declared as Navidrive 3D should be the NG4 (that huge double din one, with a big round dial in the middle) ... what you have is just Navidrive (not 3D)

I think it's about time Citroen paid you for being their parts look up man Richard! :rofl2:

Thanks.