French Car Forum

Hello chaps

I'm from Chile, so I apologize in advance for any gramatical - syntax error

I just sold 2004 my Boxer 2.0 HDI (I have had my fill of it.), which I had for 6 years and almost rebuild from scratch.

And bought a 2015 2.2 PUMA Boxer... a new journey begin...

Heres the issues:

1.- No brake lights. I checked the bulbs, fuses and lines...

Hello every one. I have 308sw 2017, i want to upgrade a few things. I have rear parking sensors, and want to install front and rear camera and install front fog lamp and maybe change headlamp to full LED. Can anyone help me how i can do this?
I have radio NAC, i see harness to front pdc in my bumper. I know i must change bumper, pdc unit and...

Hello,
My 407 2.0 Hdi does not start due to the Presence of Key parameter collapsing from Yes to No the moment you try to crank. I have checked the immo diagram, everything seems fine.
I have relearned the key code and nothing seems to work.
I have installed another complete set of BSI, ECU, Key but situation remains the same. But the Key...

Hi, i recently replaced the ecu on a peugeot 308 2.0l diesel, 2009. Its all starting and working find but my issue is with the keys now, the keys start the car and everything but the remote on keys will not unlock or lock the car, have tried resetting bsi by disconnecting battery and then holding lock button which switching ignition to on as well...

Hi,

First post here. We have just brought a 2014 3008 hybrid4. Around town or when braking the ac switches off. This leads to the car getting hot quickly (we live in Toulouse so often 30c plus). Have other owners experienced this or is there a problem with our car ?

On the motorway the ac works as expected. Presumably down to the engine always...

Are these grooves on the ends of the cam carrier oil ways or are they for sealant?

Hi all, I have been using my Peugeot 406 (2.0 HDi 90) for four years now and she's taken me everywhere. We have a family holiday booked at the end of the month and I've no doubt she'll do it on great fuel economy, but I'd like to tackle a leaking coolant problem.

I initially took the car into the garage last year (as I simply couldn't find the...

Hi

My aircon condenser is holed. I have ordered a new one, upon fitting there is a metal sleeve in the old old condenser where the feed pipe attaches that I have to remove & re use on the new one. This is damaged & beyond re use. Does anyone have a parts diagram or know what this part is called so I can source one. Many thanks

(50) Headlamp Repair Bracket
(Left), part: 9814255880, £79.96
(Right), part: 9814255780, £79.96

Sorry to be a pain but is Left facing the car or from inside the car as it's the drivers side I need? I would assume this is Left but I have ordered other parts for the drivers side which are listed as for the Right.

Hi all

This one is slightly dangerous. I noticed my cruise control was not workng today then as i was going up a hill the car acted as if i had taken my foot off the acc pedal and started dropping speed. To get it back i had to take my foot off the pedal and put it back on. I reset the BSI and went out still no cc and still did it once or twice....

After combing through all the advice I could find, sealing the lights, saeling around the airvents behind the bumper, sealing the high stop light and sealing the rubber seal to the car, there was still a leak !
Turns out it was the two stoppers that the glass rests against when closed. When new they have a flexible seal where they clip into the...

The tube popped out after removing the alternator bracket. One of the green o rings has broken off the end of the tube also.

Currently the tube doesn't seem to seal in it's hole, if you apply pressure you feel it going into the hole but it just springs out. There's no snap and fit.

If I have the tube like this and bolt it too it's bracket I...

Hi guys,
I had both complete driveshafts replaced over the weekend, however I am not happy with one of the CV boots, please see pictures attached.
I bought the part from GSF car parts, and it was fitted by my colleague mechanic.
I know mechanic is good as I used him for years, and I was always extremely happy with his work.

It's like it's not...

I have P0425, engine dropping in to serious limp mode - 30mph max and sometimes the ECU blocks cranking of the engine if stopped. I think the oxygen sensor or wiring in front of the cat may be to blame, but in this euro 5 van with the close coupled cat I can barely touch the sensor so cannot do any useful inspection of the wiring etc. Am I missing...

Hello,

My satnav in my Peugeot 308sw gtline (2016) intermittently looses connection to gps satellites causing the car to identify itself as being located nowhere near its actual location. Peugeot have suggested replacing the antenna amplifier at several hundred pounds. The car is fitted with the SMEG system I believe.

I think I have found...

Hello!

The RCZ has obviously decided that I am not busy enough already and has found a couple more jobs for me to look at! :-D

First up, it would be cooler sitting in the greenhouse! I have put a thermometer into one of the air vents and even with everything set to Lo the air coming out the vent is around 32degC. If I wind the temperature up to...

Hello Lads, I have an issue that's stumping me at the moment. Any thoughts would be very much appreciated!

Vehicle:
I have the 1.6HDi 308, 2007.

Symptoms:
Recently it's started 'coughing' or 'choking' while I drive. It used to be sporadic but recently it's been happening very frequently. The power momentarily dips and the car jolts.
A few...

Hi first post
2008 Peugeot 207 hdi sport
I have a strange issue with my wipers and headlights turning on after dark 5 mins after the car is locked. The only way to stop this is to disconnect the battery.
My local garage think it is the fuse box by the battery but can't find a new replacement. They agreed to fit a second hand one if l can find...

I changed the timing chain on a 1.6hdi engine. I put it all back together, now I get a lot of thick white smoke from exhaust. The fuel leak off pipes are pouring with diesel. This tells me the injectors are over fueling. This could be caused by dirty/clogged injectors however I haven't really set the camshaft sensor very accurately I don't think....

Hi, just wondering if you got the injectors coded? I am having the same issue and just says “impossible to program” every time i enter injector code. Also, were did you find the code written in your injectors as i am confused if i am looking at the wrong numbers. Thanks

Hi everyone, hope someone can help.

I've got a 207 sw 1.6 HDI that lost power the other day. Hardly pull you out of bed type of lost power. took off the engine cover and noticed that the middle two injectors are badly coked up, possibly the washers are seeping.

I know this is normally clutch clipping but there are no signs that the clutch is...

Hello,

I can't figure out this pipes 2way hookups (i.e. to which ends is it connected) - the relevant drawing doesn't show (at least i can't figure it out) - number 20 part

can someone shed some light ?

Peugeot 508 1.6 156BHP THP VIN NUMBER VF3**************[VIN obfuscated, can be read by forum staff]

I've ask lots of people and did not get a possitive answer yet
Is it possible to install the clutch plate on the above mentioned car the wrong way round
I bought this Peugeot 1007 Automatic from a women and after a friend of her installed the clutch plate it did not want to go into gear even after they did a clutch reset These French car is...

Hi. I have a Peugeot 207cc 1.6 HDI GT.
ABS pump failure and I’m struggling to find a replacement part. Car Reg is HJ60 PWU. VIN no. VF3**************[VIN obfuscated, can be read by forum staff]. Original module number 9665899180 - can anybody advise which ABS module is compatible as I cannot find an exact match anywhere online - thanks in advance.

Hi

Recently on my 2011 Peugeot 207 1.4 Diesel I have noticed the engine/exhaust is more noisy. It sounds as if the exhaust is blowing (That boy racer sound). I checked under the car and even got a mechanic to look over it and there are no leaks. He said it may be a baffle that has failed inside the exhaust but it sounds like it is coming from the...

Hello

I have a 2022 Pug 5008: I’ve seen a picture of window blinds in the rear which are built into the door (the door card has the panel on currently appearing to cover where they would go)

I can’t for the life of me find them anywhere, the only ones available are those that fit around the trim of the window meaning you can’t open it if...

Hi new to the forum, I hope someone can help with the problem I have got with 2015 peugeot 208.
The car developed fault in auto gearbox not changing gear When stopped it would not start again. Had it recovered and now trying to check it out
My problem is on checking with diag tool I can get communication with engine no faults,air bag etc no faults...

Hello everyone. I would like to get the electrical pinout of my peugeot 206 1.4 HDI from 2002 8HX. His VIN is: VF3**************[VIN obfuscated, can be read by forum staff]. I would like to know which are the pins of:

Air Temperature Signal
Air Flow Sensor Power Supply
Intake Air Pressure Sensor Power Supply
Air Inlet Flowmeter Signal
Air Flow Sensor Earth

Thank you very much

Hi everyone. Had this car for 4 years and no issues up to now. Approx 6 weeks ago I had the ABS/ESP warning lights come on. The next time I started the engine the warning lights had gone out and the car ran perfectly for the next week. Then it happened again and I turned the ignition off and once again the warning lights went out. Over the last 2...

Hi guys,
I have a Peugeot 407 2007 57 plate. I need to remove the washer jets from the bonnet to be able to clean them. And advice on how to get them off.
Many thanks

Where do I find the instructions how to change the bulbs in the front indicators in the 2014 (mark 2) model

Just wondering if anyone knows where I can get some weather strip for my Peugeot 307 sw 2004. Peugeot do not supply anymore.
Any help will be very much appreciated.

Hi all.
I've just discovered that on my new (to me) 508, the boot release won't work on the button by the steering wheel or on the key fob.
The button on the boot door itself is fine so I can open it ok, but I was wondering if this is a common problem and/or an easy fix.
Cheers in advance.

Morning all, I know I have been lurking, but that's because I'm a happy car owner!! (Touch wood!!)

I noticed a really strong smell of washer fluid when I went to clean the rear window of the car and thought there was a leak internally, however it appears the hose has split somewhere behind the front axle area of the underside of the car.

Is...

Hi, I know I asked this already in another sub-forum but no-one answered and I'm desperate.

Does anyone know how to work out whether my 2010 Peugeot RCZ with a 3-button CE0523 keyfob with a HU83 blade, is ASK or FSK based on the VIN?

Also, what is CE0523 ? Are CE0526 fobs also suitable for this car?

VIN: VF3**************[VIN obfuscated, can be read by forum staff]

Any help would be...

Hi,

I've had my motorhome 18 months and I am giving it a service. I have a manual transmission 2001 Boxer 2.8 hdi turbo front wheel drive only and I'm changing the gearbox oil. I'm desperately hoping that someone can help me cut through the minefield of how much oil I should put in my gearbox. I've read amounts ranging from 1.8L to 2.75L on...

IMG_8316.png Afternoon all,

I’m guessing this is a mot failure and will need replacing. Do I have to do the whole unit?

Hi all,
Newbie here, currently have an issue with the air suspension not working... so, in the process trying to work though understanding the system and how it works... 🤔
Basically, the compressor does not run. So, I removed it, looked over it, stripped it as far as I could with nothing obviously wrong.
I was able to get it running by means of a...

I have a 1999 Peugeot 306 2.0 XSi 5dr Ph2 and the other week while driving, my indicators, electric door mirrors and intermittent wipers stopped working at the same moment. I checked every fuse in the dash box and all seem good. A week later while driving everything came back on working briefly, again all at once. They stopped working for a few...

Hi! How do you change the number plate light bulb for the Peugeot Expert van , 2018 model please?
Thanks.

Hi, how are you?
I'm trying to find the schemes for both driver + passenger windows control panel for my 206 car
I have attached some images.

The thing is, i bought 2 universal power window kits in order to make my four windows automatic and i need the schemes to do the correct wiring and so on.
Could you please help me to find both schemes?

I've had a particle filter additive too low message appear on my 2012 Peugeot 207 VF3**************[VIN obfuscated, can be read by forum staff] DAM 1289082

I've got access to Diagbox 7.57 and lexia 3 as I installed and enabled a cruise control stick

Having looked up the part number: I think its 1500 RZ replaced by 96780336 80. Which is powerflex

My question:

On searching this part...

Went to see DickiG, Member who lives near Slough as he kindly offered to use his Diagnostics on my RCZ to see the problem with my Cooling Fan being on any time the Engine is running, unfortunately, no luck. Popped into my local Peugeot Main Dealer thinking I’d have to bite the bullet and get them to do it, first available Date…….end of July and...

Hi.

So my Peugeot 308 had a few engine faults pop up. They were
Filter at risk of blockage.
Particle Additive too low.
I have just been to my garage and the Additive was done getting rid of these faults.
After leaving the garage the car was very limited on power and I have a red box pop up with engine fault please repair vehicle.
Has anyone had...

All of a sudden started car but rpm is not working but Speedo etc is working

And I've searched 207 rpm problem and nothing

I got a feeling I going to be told it's a wiring harness problem somewhere causing the problem

Anyone have a idea

Any one had this before
P0362 passengers air bag deactivation led
Hasn't got a passengers air bag

Hi All,

does someone know if is there any option in diagbox to disable folding back multimedia display ? I want my display to stay open after ignition off.
I have a 2016 year Peugeot 5008 with RT6 (WIP Nav+ ?) and BSI2 (BSI 2010 ?)

Many thanks,
imedve

Hi all. Long standing issue with this van going back 12 months with many threads on here looking for a clue.

One thing I've often over looked is the EGR/Turbo as they were replaced back in 2021. However what I've also failed to mention/notice is the constant topping up of the coolant. Until last week I thought I had a slow leak from the expansion...

Erm catestrofic loss of power but no violent shuddering,

Sure its cam shaft as the timing chain doesn't turn,
But i am putting a new water pump on with timing chain.

Does this necessary mean i will
Need 2 x new cam shafts

Thanks by new member Andy

Hi I have a 407 2.0 diesel that has low power on hills or long drives and won't go above 3000 revs. Upon inspection I noticed a plug with what looks like a green wire that goes nowhere and no snapped green wire in the shielding. As you can see in the pictures. The pic with the screw sticking out is just so you can see where the plug fits in. I...