Peugeot

9378 topics

Page 97 of 188
- Jump to page:
Previous
1
…
95
96
97
98
99
…
188
Next

Announcements

Statistics

Last post

Takata Airbag Recall Documentary

by GiveMeABreak » 06 Mar 2025, 17:55 » in Citroën
1

2

3
First post

Given the number of 'After-sales campaign' notices concerning Takarta Airbags I have been made aware of when looking up parts from PSA for members, I thought I would post a link to the following documentary that may be informative concerning the issue with these igniters.

According to Takata, the chemicals in the airbags’ explosive charge can...

Last post

An 'eejit' in admin has just noticed, and panic'd. Covering backsides. Something might happen! - Then DO something! And 'something' has been done.
It's the way of our present world.

Needless to say, no-one is going to say: It will be fine, just take it along to your nearest Citroen outlet - (hence the DO NOT DRIVE notice) - because then they will...
Replies: 34
Views: 231066

Last post by Stonehopper
23 Oct 2026, 07:21
PSA Electrical Diagrams - Wiring & Symbols Codes Index

by GiveMeABreak » 09 Dec 2023, 17:48 » in Diagnostics

PSA Electrical Diagrams - Wiring & Symbols Codes Index

The following will cover most basic equipment, but will exclude later systems & Tech.

PSA Electrical Diagrams Introduction - Function and Constitution of Codes
PSA Electrical Diagrams - Coding of Functions
PSA Electrical Diagrams - Component Coding
PSA Electrical Diagrams -...

Replies: 0
Views: 183355

Last post by GiveMeABreak
09 Dec 2023, 17:48
Citroen, DS Automobiles and Peugeot Official Part Number Requests

by GiveMeABreak » 15 May 2021, 13:55 » in Citroën
1

…

202

203

204

205

206
First post

Parts Service Announcement - 21st March 2025

Please note that there is a temporary disruption to our 'Parts Service', so we will be unable to provide any official parts for members at the present time. Please refer to the Post HERE for further info

Last post

Disruption to Parts Service

As you may be aware, the consolidation of the old PSA to the Stellantis Group systems has resulted in both a merge of data tools and a requirement to migrate PSA accounts to Stellantis Systems.

This has caused some problems for organisations like ours and the Team are currently looking at the best way forward. This...
Replies: 3080
Views: 1368616

Last post by GiveMeABreak
21 Mar 2025, 10:53
Airbag, Dashboard, Seat Belt & Airbag ECU Repairs

by GiveMeABreak » 24 Jun 2020, 17:01 » in Useful links
1

2

3

4

5

6
First post

Just for members to be aware that airbagteam.com based in the UK are offering a 10% discount to FCF members on any of their services.

The FCF does not endorse any company directly, but thought this would be of use to members.

Full details of their services and the discount can be found here:

Airbag, Dashboard, Seat Belt & Airbag ECU Repairs

Last post

I I gorgot
The car is a citroeng C2 1,6L VTS 2005
Replies: 80
Views: 701656

Last post by FinnCitro
14 Sep 2026, 17:59
New PSA Heritage Parts for Classic Cars

by GiveMeABreak » 11 Oct 2019, 16:18 » in Citroën

First post

Parts for Classic / Older Citroen, Peugeot Renault Vehicles

This may be of interest to Members with older vehicles where getting parts is a struggle and for those not already aware of the site.

PSA are embarking on a project to provide some supplies of original and re manufactured parts for older vehicles and classics, and have made it a...

Last post

anti-virus is blocking.......

Replies: 7
Views: 190912

Last post by Stickyfinger
16 Sep 2024, 21:28
Revised Easydiagnostics Discount Procedure

by GiveMeABreak » 03 May 2018, 17:22 » in Forum News, Announcements and Issues

Please note that there is a new procedure in place for members wishing to take advantage of a 15% discount off products from Easydiagnostics.

The old discount code that was entered into the checkout is no longer valid, as a result of the code being propagated over the Internet.

After discussions with Jim from ED today, we have agreed a new...

Replies: 0
Views: 152268

Last post by GiveMeABreak
03 May 2018, 17:22

Topics

Statistics

Last post

206 DW8 crank issues

by chinkostu » 02 Nov 2014, 19:58

First post

A year or so ago I got around to changing the belt on my 206 (1.9d, DW8B) only to find it shredding itself after less than 300 miles.

after removing the debris and replacing with the old belt I figured the Crank pulley was shot, so would need replacing. my issue is that every other DW8 engined car I have seen has a completely different style of...

Last post

Good idea.

Peter

Replies: 3
Views: 532

Last post by Peter.N.
03 Nov 2014, 12:22
peugeot 307 2.0 110bhp sw

by sensibledad » 28 Oct 2014, 17:43

First post

hi all hope someone can help my Peugeot is acting up and I hope some light can be shed on my issue is engine management light came on about 3 weeks ago and car went into limp mode with the message anti pollution fault on the screen had a diagnosis done by a mechanic and was told that the throttle pedal sensor was failing
so put on a new pedal was...

Last post

hi guys just waiting for a diagnostics to be done someone told me it sounds like the throttle position sensor could this be the cause if so does anyone know where it is located on the engine I think the engine code is dylx4162617 engine its a 2.0 hdi engine thing to rule out different things while waiting for diagnostics cheers roger

Replies: 2
Views: 405

Last post by sensibledad
29 Oct 2014, 16:28
405 Brake Compensator Installation

by evilally » 26 Oct 2014, 19:50

First post

I'm installing a compensator onto a beam that didn't have one factory fitted, so apart from some unclear pictures on Google, I'm working blind. Does this look correctly installed?

The connectors appear to take 11mm and 14mm union nuts, which are input/output? I'm guessing it won't work correctly the wrong way around? :-k

Last post

Ok, thanks, I'll get it adjusted before fitting the axle.

Replies: 7
Views: 670

Last post by evilally
28 Oct 2014, 18:24
406

by Mbryn1 » 18 Oct 2014, 12:23
1

2

3
First post

any advice on removing high pressure pump 2001 406 2.0 hdi
Thank you Bryn

Last post

I just cut the filter off lol goes like a new one
Replies: 37
Views: 2634

Last post by Mbryn1
26 Oct 2014, 14:23
2009 308cc Non Runner

by shelleyamy » 14 Oct 2014, 12:02

First post

I have been posting on PeugeotForums with the following, hoping to catch a few more opinions here.
Big initial post I am afraid.

2009 308cc 2.0 hdi 16v RHF engine. Delphi fuelling

I have just bought a 308cc as a non-runner. Don’t the full history, but is said to have suffered water damage. No sign of entry in the cabin or under the bonnet, so I...

Last post

Well done, and thanks for the update.

Replies: 4
Views: 3034

Last post by Hell Razor5543
24 Oct 2014, 18:53
206 1.4 8v valve clearances

by duke » 21 Oct 2014, 21:21

First post

Does anyone have a tip for how to ensure an engine valve is fully closed before checking the clearance? It is impossible to see by eye, and the only other way I can think of is by using a dial test gauge. I have some clicking noises from my 206 engine which I think are a bit more than just the fuel injectors opening and closing.

:?

Last post

Thanks Malcolm, I shall give this method a try.

Replies: 4
Views: 7413

Last post by duke
22 Oct 2014, 22:07
206 1.4 8v spark plug replacement

by duke » 15 Oct 2014, 20:01

First post

Hi there,
Does anyone have any tips for locating a new spark plug into the threaded hole in the cylinder head. The hole is at the bottom of a deep tube so it is not possible to get your fingers in. The last thing I want are any crossed threads. I have just bought the 206 and want to take part in the forum to help keep the car in good running...

Last post

Thanks for all these tips, I shall have a go and proceed with caution!

Replies: 4
Views: 661

Last post by duke
21 Oct 2014, 20:57
406 hdi

by Mbryn1 » 18 Oct 2014, 12:07

First post

wanted advice on changing high pressure pump
Any body got a link to a free repair manual

Last post

onclick= window.open(this.href);return false;

Replies: 1
Views: 343

Last post by Gibbo_Wirral
20 Oct 2014, 13:40
306 HDi Roof Rack Bolts

by steveoracle » 13 Oct 2014, 14:14

First post

Hi Everyone

I wonder if anyone can help with this.

I’ve got a 306 2.0 HDi (love it, best car ever). I lost the bolts (the ones that screw into the roof rails) that hold the roof rack on and don’t know where to get replacement. Anyone got any ideas where I could get replacements?

Best Regards

Steve

Last post

Hi Gibbo

Halfords! I'll check with them ..

Ste

Replies: 4
Views: 475

Last post by steveoracle
14 Oct 2014, 13:26
removing an injector

by orinoco74 » 07 Oct 2014, 12:28

First post

I had my car on a diagnostic laptop the other day and apparently injector number 3 is always open and needs replacing on my 306 1.6HDI. I went to try get it out last night, moved the wiring back so I could access the hex nuts, got the nuts off the studs that hold the injector on, removed the electrical clip and the fuel input nipple on top of the...

Last post

if you post the last 8 digits of your chassis/VIN No. we will be able to see exactly what car/engine you have

Replies: 3
Views: 516

Last post by citronut
09 Oct 2014, 08:53
quick HDI question

by orinoco74 » 06 Oct 2014, 14:12

First post

So it seems that one of my injectors has failed, I had a diagnostic laptop on it that came from a dealers, 3 of the injectors had almost identical values on-screen but the injector I would call number 2 (second from the left) had a much different value. It wasn't coming up with an error code as apparently its a mechanical error not an electric...

Last post

Cylinder number one is at the gearbox end of the engine so the one furthest to the right when you open the bonnet.

Replies: 1
Views: 884

Last post by wheeler
06 Oct 2014, 19:06
Tailgate actuator only locks

by jonnya » 02 Oct 2014, 15:43

First post

Hi all, I have a 2003 Peugeot 406 s 1.9d I have changed what I belived to be a faulty actuator with a working actuator. In fact, both actuators still work...but both actuators only move to the lock position. When I press the fob to unlock the car doors unlock but not the tailgate. What could be causing this?
Thanks, Jon.

Last post

my fist thought would be a broken wire between the tailgate and car body,
or maybe the lock mechanism is binding and requires lubricating

Replies: 1
Views: 379

Last post by citronut
02 Oct 2014, 18:19
207 Brake Hub & Drum

by chemexhants » 29 Sep 2014, 18:59

First post

I've damaged the brake hub on my 207 whilst pressing in a new bearing. Peugeot want £105 for a new one (!) so I'm hoping to find one from a scrappie. I'm also wondering what else this part was fitted to - suspect Citroen C3, but what else?

The Peugeot part code is 424750. Can someone help by cross referencing via autodata or similar?

Many...

Last post

Thank You Malcolm, I'll give them a call.

Replies: 6
Views: 634

Last post by chemexhants
30 Sep 2014, 19:38
307 1.6HDI EGR issue

by orinoco74 » 28 Sep 2014, 23:28

First post

Ok it seems I have the usual EGR valve issue with my 05 plate 307 1.6 hdi. I have seen these blanking plates that are offered and have a couple of questions.

1) will it make the engine emission light go off on the dash if I use a blanking plate
2) will there be any power loss by using a blanking plate
3) will I need to disconnect the wiring...

Last post

1. It depends on engine. Some owners have needed to delete the EGR from the ECU, so combined it with a remap and / or remap and DPF removal.
2. No.
3. You shouldn't.

I've fitted two plates on the 1.6 110bhp engine in a 57 plate 307 and a 54 plate 407 and not disconnected any electrical plugs.

My current car is a 2L 90bhp 307 and the EGR valve it...

Replies: 1
Views: 1285

Last post by Gibbo_Wirral
29 Sep 2014, 13:50
brakes of peugeot 508 sedan

by ahmedghom » 22 Sep 2014, 07:15

First post

Dears
i have problem with my Peugeot 508 after 3000 km I found a lot of powder come from brake pads at the wheel and every time I clean my wheel I found this powder what is the reason and is it a problem or not

thanks

Last post

hi and welcome

it is quite normal for brake dust to build up on wheel rims either steel or alloys,
it is more noticeable on alloys though,

this may occur more depending on the brand of pads you have fitted, i would suspect a cheaper brand to cause this more often

Replies: 1
Views: 396

Last post by citronut
22 Sep 2014, 07:29
Electrics or fuel????

by Willow1983 » 14 Sep 2014, 15:34

First post

Hi people, I hope u can help me, I have a 306 xsi s reg. for just over a week my car seems to be misfiring when I try to rev it. But if you keep the revs up its fine. Also does this low revs when driving, After this it seems to pull well. I've also noticed when starting it will fire up as normal ( meaning a couple of turns and it fires) but it...

Last post

When was the cambelt last changed? Check this out
onclick= window.open(this.href);return false;

Replies: 5
Views: 587

Last post by isisalar
20 Sep 2014, 12:48
207 battery disconnect procedure

by PopPops » 16 Sep 2014, 19:23

First post

My apologies if this has been covered many time before, but I haven't found anything yet.

We are planning to leave my wife's 10 plate 207 automatic (1.6 petrol) at our house in France for 3 months while we are not there. I am fairly sure the background current drain would mean the battery is flat on our return and I have no means of trickle...

Last post

Many thanks, I'll give it a go!

Nigel.

Replies: 2
Views: 1780

Last post by PopPops
17 Sep 2014, 13:59
Peugeot 306 hdi missfire/hesitation

by paulpope33 » 07 Sep 2014, 20:15
1

2

3
First post

Hi there iam new to the forum and i was woundering if anyone could help me,i have a peugeot 306 hdi is drives fine but ive been suffering a problem iam not sure if you would call it a missfire or hesitation when driving this happens all the time when the car is cold/hot

any help would be greatfull

thanks

Last post

Here you go:

breather:

Filling duct

Not clear where the breather is on yours Mike- but that hole in the cap looks like where the tether should be attached on the drawing in service.citroen.....

been on phone to peugeot they dont do this part any more so now stuck to where i can get this from
Replies: 31
Views: 2800

Last post by paulpope33
17 Sep 2014, 12:04
03 206CC lighting fault

by citronut » 12 Sep 2014, 17:58

First post

the car is an 03 206CC 1.6 16V 110 TU5JP4

the owner says if/when using the indicators they come on then of and the head lights come on in there place,

she has been told it will probably cost over £400 squid from the local pug dealer, and i dont think they have plugged there analyser in yet, as they quoted her £50 squid to do so,

funny as my new...

Last post

just did a goooogly search on how to dismantle a COMM 2000,
and this is one result that came up for fixing a floppy stalk ( NOT ) :yikes: :eye: :shock: :-D :lol: :rofl2: :rofl2: :rofl2: :wink:

onclick= window.open(this.href);return false;

Replies: 5
Views: 618

Last post by citronut
16 Sep 2014, 18:12
306 XSi intermittent speedo

by franster » 07 Sep 2014, 21:15

First post

Basically the speedo on my 306 XSi only works when it feels like it. I had thought it may be the speed sensor, but when I was sitting in traffic the other day, the needle began to hover at around 10mph even though the car was not moving. I'm now more prone to think it might be a faulty speedo, but would like a bit of advice before I start guessing...

Last post

Any more ideas? Would the sensor itself work intermittently, and give false signals at standstill? Do I need to be tracing wires looking for frayed bits shorting to earth? Should I just leave it and put up with it? AAAARRRRGHH!

yes it is possible,

i have seen a transducer full of gear oil as the spindle O ring had failed, i took it apart...

Replies: 6
Views: 786

Last post by franster
14 Sep 2014, 21:56
Looking at 206's

by isisalar » 07 Sep 2014, 16:20

First post

Following the recent demise of the wife's Saxo and mindful of the advice on here to avoid diesel for a low milage car, I'm looking for a 206. A 1.1 or 1.4 petrol. It would seem they are both about the same fuel wise and the insurance difference is minimal. I'm leaning towards a 1.4 as they seem a bit more common and should have had an easier...

Last post

Mike it was you that really put me off getting an HDI 90 for the low milage use. Now I'm really confused.

No, I didn't, you said something about buying a diesel because one of the petrol cars you'd seen had a misfire and it could be plugs, leads, coil pack or fuel injection, or something like that, and I merely pointed out that diesels also have...

Replies: 12
Views: 848

Last post by Northern_Mike
14 Sep 2014, 17:29
406 Hdi intermittint bad idle/ surging on low power

by patrickgledhill » 24 Sep 2013, 03:19
1

2
First post

Hi guys, my 406 hdi has developed an intermittent lumpy idle, sometimes very lump lasting a couple of seconds,its kind of hunting noticeable both hot and cold.
ive put a can of very expensive diesel egr cleaner through no real difference, Also have some injector cleaner in the tank.

with the foot flat it powers away smoothly no problems

EDIT :...

Last post

Good to hear, also nice to hear the Lithuanian ones work - just in case. :)

Peter
Replies: 26
Views: 8360

Last post by Peter.N.
10 Sep 2014, 09:11
XUD head gasket symptoms?

by bertiewhite » 05 Sep 2014, 22:00

First post

Whilst working away from home my wife told me that just lately my XUD engined Partner had been losing power and would cut out. On my return I found out that it wouldn't idle. Suspecting that the car had been run low on fuel, I changed the fuel filter & put some injector cleaner in the tank but it was no better. I managed to get the engine to idle...

Last post

I've just had an idea - I work on aircraft and when we've had leaks in the pitot-static system (air getting out) we use a fluid around unions which show bubbles escaping. If I sprayed something like WD40 around the fuel pipes, would this work in reverse by showing an change in idling?

Yes...

Replies: 6
Views: 1467

Last post by Northern_Mike
06 Sep 2014, 20:52
2.0 PARTNER HDI SLOW TO TURN OVER

by carman » 20 Aug 2014, 21:57
1

2
First post

Hi, 2004 hdi partner is very slow to start first thing in the morning as the weather gets colder,had the battery checked and it,s ok ,once started, it will start every time ,I put a jump battery on it this morning and it started first time ,is there a problem ,with starters, earths ,battery drain?,,thank you for any replies

mick

Last post

Hi, Thank you for going to so much trouble to find the correct motor for me ,I saw somewhere that there is an upgraded motor to sort this wide spread problem out,wish it was like a morris1000 or a old escort where you can actually see the motor :lol: those were the days :-D ,will keep you informed on the result of the new battery

cheers
Mick
Replies: 18
Views: 2730

Last post by carman
05 Sep 2014, 18:41
peugeot 206, need help with engine mount and AL4 issues

by gabi911 » 05 Sep 2014, 09:05

First post

hi.
I own a 2007 Peugeot 206 with AL4 Gear and TU5JP4 engine.
I have two questions:
1) I need to replace the engine mount but the genuine one is very expensive, and I want to replace the 65MM bus, I heard the the SASIC 8003201 will be pretty good for me but I don't know the correct installation of the bush because it alitle different from the...

Last post

if you do not have the OE part No. and you send me the last 8 digits of your chassis/VIN No. i will get it for you, then you can do a google search to see if you can find someone selling NOS = new old stock,

although if its the same size bush as on the likes of BX's and Xantias then GSF sell just the bush i think for around £8 or there abouts

Replies: 2
Views: 1231

Last post by citronut
05 Sep 2014, 13:22
Bosch ECU

by alruss » 04 Sep 2014, 22:45

Hi, does anyone know where to find the connections to the Bosch EDC15C2. I have ecu and engine but cables missing, I also want it to run without a gearbox so any help much appreciated.

Replies: 0
Views: 355

Last post by alruss
04 Sep 2014, 22:45
206 speed sensor - between a rock and a hard place

by xsaras4ever » 14 Aug 2014, 09:14

First post

Hello to all.

We have done a major transplant between 2 Peugeot 206s.

Donor car is 2003 Peugeot 206 1.4 hdi, with aircon.

Receiving car is 2002 Peugeot 206 1.4 hdi , with sunroof, no aircon .

We changed everything - engine gearbox , bsi , ecu front struts - almost everything except the cars own wiring loom. We also have not moved the aircon...

Last post

Hello to all.

All problems now fixed and a very calm dashboard.

We changed all the wiring looms from the 2003 car to the 2002 car and changed and rebuilt the rear axle too.

We also moved over the ABS block and all the brake pipes (as they were different)

ABS light stayed on for about 1km but is now functioning properly.

Once again thanks to...

Replies: 4
Views: 2191

Last post by xsaras4ever
04 Sep 2014, 07:36
A/C cut-off control unit

by Edhertz » 03 Sep 2014, 21:04

Hi folks,
Can anyone tell me where I can find the A/C cut-off control unit on my '99 Peugeot 1.9 D? ( 30 on diagram 3 Haynes),
Cheers in advance

Replies: 0
Views: 433

Last post by Edhertz
03 Sep 2014, 21:04
Need help here with 405

by Miadnima » 01 Sep 2014, 19:56

First post

Hello all,

Approximately I viewed thw whole forum but unfortunately could not find a solution for my problem, the problem is with the unstable condition of the car when the accelarating pedal is released, as soon as I stop pushing the pedal and take my foot off the car losses it's control and kicks like an animal , this condition is doubled...

Last post

Difficult to say, but if things are worse with the AC on, then I would look to see if one of the pulleys, or the alternator or PAS pump are partially seized, causing a sudden retardation in engine speed. Unless something is causing the engine to try and stall?

Replies: 3
Views: 435

Last post by RichardW
03 Sep 2014, 12:37
Peugeot 206 - Excessive road noise?

by praxibetel » 28 Aug 2014, 09:49

First post

Hello all, pretty new on this forum, since my introductory post I've got another 206 2.0 HDI, with 40,000 miles in pretty good nick.

One thing that's really bugging me is the road noise. I started to notice it a few weeks ago and figured it was probably the cheapo tyres which were pretty worn out anyway, so I had them replaced with Michelin...

Last post

I suspect that these new noise rated tyres are tuned to give the best rating possible on whatever surface the rating is done on, probably nice smooth tarmac. The noise on mine on the M27 was so bad I was checking door rubbers and pricing up other tyres. The previous set turned to jelly, badly affecting the handling and stability but had loads of...

Replies: 9
Views: 3435

Last post by isisalar
03 Sep 2014, 12:01
More 305 brake upgrades snags

by nametooshort » 02 Sep 2014, 00:59

First post

Dammit, why is the 305 so troublesome. This is starting to get annoying.

So, long story short, my house is like a French car grave yard at the moment, and while we managed to build a auto v6 205 and the ultimate MPG highway cruiser if you are not in a hurry, a 2.0HDi 205, I still can't get this damn 305 brakes upgraded which is what I want, 205s...

Last post

Unfortunately i dont have no 266 mm brake components that i can try right now. Since the original 305s system was 246mm, and the calipers juuuuust clear the stock 15inch rims and fitting almost any non genuine rims dont work, so i figured the 266 mm setup would be even bigger, so since i found a couple of donor 306s with 246mm brakes, i figured id...

Replies: 5
Views: 519

Last post by nametooshort
02 Sep 2014, 15:35
Thinking of buying a 307 1.6 HDI 90bhp

by mikesporting » 26 Aug 2014, 11:48
1

2

3
First post

Afternoon All,

I recently joined this forum seeking advice on Citroen C5's and their 1.6 HDI engine. I'm currently in the market for a new car as I now need a 5 door for the soon to be new arrival..... I've been looking at lots of 308's and so far they're the one to beat, but..... I've just seen this advertised and I do like the look of it!...

Last post

Well I've took the plunge and bought the above link..... The only thing that I'm unsure about is that when it revs it sounds unusual, it's quite a high pitched noise?
Replies: 33
Views: 5103

Last post by mikesporting
29 Aug 2014, 16:49
05 307 HDI 110 rad fan

by citronut » 29 Aug 2014, 07:20

First post

my friend has as in title

since he has owned this car at random periods the rad fan will run for quite some time, even in the engine is not up to temperature,

then it might not do this for months,

i fitted a cam belt kit and water pump about two weeks ago,
on running it up to temperature i said to my friend in my experience and others on here,...

Last post

The fan will run on if the car is regenerating. Read up on how the DPF system works.

Replies: 1
Views: 314

Last post by Gibbo_Wirral
29 Aug 2014, 13:46
206 - fan not cutting in?

by Harlequin » 19 Aug 2014, 10:57

First post

heya , my friends car has a problem - the fan isn't coming on!

its a 56 reg pug 206 , 1.4 petrol. she says the thermo sensor has been changed. any idea`s?

Last post

Glad you got sorted and thanks for letting us know what the problem was. This information could be of use to someone else.

Replies: 6
Views: 741

Last post by BX
28 Aug 2014, 19:56
806 2.0 Auto Gearbox fault?

by milly » 24 Aug 2014, 17:45

First post

Hi all,

I hope you can help on the above 02 model.

I parked the car up one night in the week went to sleep in the back woke ( camping with kids) up in the morning and when hitched up the trailer it went into limp mode.
The car was left in neutral so I had not noticed the problem straight away ( buzzer bleeped to let me know it was in neutral )
I...

Last post

Useful information.

Replies: 4
Views: 576

Last post by Hell Razor5543
27 Aug 2014, 16:33
405 estate intermittent rear wiper

by nickrose137 » 26 Aug 2014, 19:25

Hi - apologies if this has already been covered, but I'm new here. Is there a way to make the rear wiper on a 405 estate work intermittently, like the one on the Citroen BX? Thanks, Nick

Replies: 0
Views: 295

Last post by nickrose137
26 Aug 2014, 19:25
306 0/s drive shaft

by marchmaggottboy » 21 Aug 2014, 19:00

First post

hi all, new to this but here goes, i have a 1998 1.4lx pug 306 what i love , but ever since ive owned it theres been i slight knocking noise coming from o/s drive shaft so i thought id fit a new one ha ha ha !!!! ive now tried 2 diff ones and am having trouble fining the right on to fit ???? i know it 21splines outer and 25 inner with no abs , but...

Last post

hi and welcome

if you send me the last 8 digits of your chassis/VIN No. i will get you the OE part No., which you can then either aim at your local motor factors, or do a goooogly search to find one,

were are you located

Replies: 2
Views: 375

Last post by citronut
23 Aug 2014, 19:39
Citroen suspension to peugeot i.e dampers (shocks)

by Twiss » 22 Aug 2014, 12:31

First post

Hi

I had a Citroen Zx Td and bought a new set of shock absorbers but never fitted as 2 months after it failed its MOT and it was not worth repairing ( Sad day as I had it for 9 years ), bought 2 diiferent cars in a year and finally had enough of them playing up so started looking at citroen and peugoet again. After a few months of searching...

Last post

I think you will find that a ZX has 306 suspension.

Replies: 4
Views: 590

Last post by Oldpug
23 Aug 2014, 17:49
406 hdi 110 engine speed fault code

by patrickgledhill » 22 Aug 2014, 04:11

First post

Hi guys,

I've got the 406 hdi 110 as a few of you may know. Recently the car has been doing this strange this where it seems the car cuts out for a split second and then its fine again, while driving you can feel a real jerk when this happens.
also yesterday the engine just stopped when i went to change from 1st to reverse, i still had the clutch...

Last post

They're not really known for giving trouble - it's on top of the gearbox, bit difficult to access AFAIK as it's buried under a load of wiring.

Replies: 3
Views: 578

Last post by RichardW
22 Aug 2014, 20:02
406 HDi: Message "Coolant too hot"

by marsalek » 24 Jul 2014, 12:58

First post

Dear Guys,

my father's 406 HDi 109 BHP, Mk2 prints a message Coolant too hot and beeps, although the engine temperature is fine, e.g. immediately after cranking up a cold engine. The coolant thermometer stays always below 90 degrees. The thermometer gives believable readings, so the coolant too hot message is somewhat ill.

The message comes ONLY...

Last post

Hi Guys, I have had the exact same problem and the fan relay solved it. Glad you got it sorted
Pat

Replies: 6
Views: 936

Last post by patrickgledhill
22 Aug 2014, 02:56
DPF's

by bill hughes » 18 Aug 2014, 13:23

First post

can anyone tell me if both the 406 and the 407 have DPF's I want to replace my ageing Xantia and fancy a Peugeot as good Xantia's are hard to come by but don't want a DPF any suggestions would be welcome, thanks

Last post

er, no

Replies: 11
Views: 893

Last post by Peter.N.
21 Aug 2014, 23:38
307 intermitent radio/cd player

by leeroy99 » 18 Aug 2014, 19:45

hi me again car running great but seem to be getting hassle with my radio/cd player.
it has the multiplayer disc & single cd head player in,but its all working manually,& thru the joystick.
but no sound & it just works now & then had the head unit out & cd player out & checked the wiring but carnt see anything wrong
? just wondering if anyone...

Replies: 0
Views: 349

Last post by leeroy99
18 Aug 2014, 19:45
peugoet 406 auto lights????

by deano1970 » 14 Aug 2014, 21:02

First post

hi,
just bought an old 52 plate 406 hdi estate,quite a nice car...prob need a new indicator stalk as the one on it quite loose (turns straight to turning left,after turning right) anyway, the problem is the auto lights function.... If I turn it on using the stalk,the message comes up saying auto lights are on and the lights come on no matter if...

Last post

well,
i'm not a million miles from bradford and the fact this guy will do the job for me for £45 sounds a bargain to be fair....will pop over one day when i'm off work,no great rush, the only thing I have to keep checking is my left indicator isn't on after going round a right turn...will this,as richard says it's a faulty com2000 . fix the...

Replies: 12
Views: 1969

Last post by deano1970
18 Aug 2014, 18:16
106 Diesel, Starts but Dies when Cold

by Pug_XUD_KeenAmateur » 07 Aug 2014, 22:01

First post

Weird fault with my stepdaughter's 106 diesel (1527cc TUD on an 'R' plate), as below, would be lovely if you could point me in the direction of where to look first

• Starts easily, just a moment's cranking
• Idle dips rather low, once or twice, then stalls. All within first 10seconds running.
• Starts easily a second time, runs briefly and...

Last post

Fix some tyres round the rear quarters. :wink:

Peter

Replies: 6
Views: 722

Last post by Peter.N.
17 Aug 2014, 12:57
406 Clutch Cable

by kilianmanning » 16 Aug 2014, 04:31

Hey guys,
Having trouble with my 406 td clutch cable!
When I refitted the cable on the gearbox last time it has started to act up.
Now the clutch is biting extremely high & it slips in every gear ! : :cry:
What is after happening?

Kilian

Replies: 0
Views: 326

Last post by kilianmanning
16 Aug 2014, 04:31
boxer not turning over

by zacharyj » 13 Aug 2014, 22:16

First post

Hi I'm new to this any help would be most welcome I've have got a 2004 boxer the cam belt snapped so I changed the broken rockers and put a new water pump on and timing belt kit. The engine turns over by hand fine. But when I went to start it there was nothing and the engine light is on. I've checked the starter motor and that is fine.

Thanks...

Last post

I checked the starter motor off the van so I could rule that out. I have just checked the earth lead from the gear box touched it and it come off so hopefully will be that thank you for the help will keep you updated

Replies: 6
Views: 800

Last post by zacharyj
14 Aug 2014, 15:52
P1351 206 1.4 hdi

by LEEHUMP1 » 14 Aug 2014, 12:04

I have just bought a Peugeot 206 1.4 hdi 54 With 88000 miles. It passed its MOT yesterday but when I put my cheap code reader on it showed P1351 as a logged fault and then again as a pending fault? Is this something to do with the glow plugs? Any help would be appreciated. Lee.

Replies: 0
Views: 1378

Last post by LEEHUMP1
14 Aug 2014, 12:04
PP2000 - which diesel injection system

by xsaras4ever » 12 Aug 2014, 16:50

First post

Hello to all.

On our 206 , 1.4hdi , when we finally got into to Engine Ecu, we selected diesel - then it asks which injection system - and it give a list of about 10 - for example 8HZ BOSCH EDC16C3 Euro 4

Servicebox with our VIN input does not give enough detail.

Can anyone tell us how to discover exactly which one we have ?

Thanks in Advance

Last post

Hello ,

the sticker says EDC16C3 which appears in appears in 7 of the options of PP2000.

??

Replies: 4
Views: 521

Last post by xsaras4ever
14 Aug 2014, 11:49
306 cooling fans and A/C

by orinoco74 » 06 Aug 2014, 10:49

First post

Well its all a bit of a mystery, I will give a list of symptoms and let me know what yall think...

Firstly my a/c doesn't work, the compressor clutch doesn't engage when the engine is on. The ONLY time it engages if on the first click of the key and the a/c button is lit. If I press the a/c button on the first click of the ignition the clutch...

Last post

more than likely just dirty plug terminals then, as its unlikely the tip of the sensors could cause this issue IMO

Replies: 3
Views: 387

Last post by citronut
14 Aug 2014, 08:20
Peugeot 406 1.9dt R reg engine fault

by rich201283 » 20 May 2006, 18:09
1

2
First post

My engine has sudenly lost power, losts of smoke and sounds like it missing, I have checked engine sensors, Put it into peugeot and it came back with a fault with the pump, Got a 2nd hand pump put it on(same problem) What i did notice there was a lot of oil gunge in the inlet manifold, iTS NOT OFF THE TURBO AS THIS IS OKAY, I think its a valve or...

Last post

Hi Rich201283 I have a Peugeot 406 1.9 td to, my car is on the T plate and has developed the same fault that your Peugeot suffered. I am sorry to bother you but I was wondering if you got the issue resolved and if so how because I am at a complete lost as how to repair mine and any input would be very muvh appreciated thanks.
Replies: 18
Views: 3011

Last post by alan1701
13 Aug 2014, 23:11

9378 topics

Page 97 of 188
- Jump to page:
Previous
1
…
95
96
97
98
99
…
188
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum