French Car Forum

Does anyone have experience of faulty oil pressure switches on a 2008 Boxer 2.2 . The parts lists give different switches for this model but I think it is 1131J2. Is this right and could you tell me exactly where it is fitted. cheers.

I've had my Partner van, 61 plate, (850 S HDI 90) for over 6 months. I've just locked it and for the first ever time I've noticed the central locking button flashing red every second or so. The button has a padlock symbol on it and is in the central console just above the gear stick. The van still locks and unlocks OK with the key fob.
I've read...

Hi I'm new ,appreciate been welcomed on here, sorry for length of post,,, I'm on my 3rd engine in 3 months, engine 1, xud 1.9td, seized and blown head, engine 2, 1.9 xud n/a, suspect cracked head, engine number 3 dw8 n/a, engine 2 had a bosch pump so I was happy with that but it didn't work 😡 lots of blood sweat and tears later I have a nice...

I do quite a few repairs for other people I thought I might write this up as it may help you out if you have the same issue. The 306 HDI gutless no power struggle to get up to 100kph. I put PP2000 on it and the scan had no faults. I started with the easy stuff replacing the fuel filter, cleaned the MAF with the proper MAF cleaner spray, checked...

That's a lotta money for a radiator.
Last one I bought was for a Honda Accord and was 67 quid.

I bought a 207 HDi for Cheryl the other day.

I noticed when looking around it before buying that it needed a couple of bulbs but thought nothing of it. When we got it home yesterday I tried to change the bulbs and noticed that they still didn't work.

I took the plugs off the headlights and metered the plugs. I was getting 6v at some of the pins...

My Peugeot 308 2.0 HDI has a mysterious vibration noise which has got me puzzled.

The noise comes at precisely 1950 rpm and sounds as if some resonant frequency is met at exactly this rpm (see/hear video: The noise is only dependent on the rpm, so it doesn't matter if the car is in motion or just standing in neutral. It gets significantly louder...

Hello
I have the peugeot 1.9TD engine in my camper. it's a 1998.
The engine only has 26,000 miles on it. (not that it makes any difference!)
It normall y starts at the first flick of the key once the heater plug light has gone off.
Yesterday it started but only for a second or two....and then stopped abruptly ...I tried to start it again and it...

Good evening

My Peugeot seems to be lacking a bit of power recently.

I changed a ball joint a short while ago and dropped a little oil when I (accidentally #-o ) pulled the driveshaft out.

I'd like to drop all the oil and refil but I can't seem to find a fill plug just a black plastic cap.

Does anyone know of this is the fill location and...

How’s it going,

I posted this in the Peugeot Forums but I thought I’d put it here too

Recently my grandmother gave her car to my mother as she was finished using it - a 2006 Peugeot 307 1.4.

Now badges on the side of the car read “SX” yet when I look up the reg on a reg check website it appears as “XS”.

I cannot find any information to show...

Typically not just my car needing money spent on it but the old ladies as well is playing up. She has a 2001 206cc 2.0 petrol and recently has flagged intermittently the usual generic fault anti pollution blah blah. I stuck Torque pro on to check for anything and got P0201 error code, injector 1 circuit malfunction.
Question is do I get it booked...

Hello everybody,
How i know if my remote key is ASK or FSK , my car is peugeot 308cc 2011,
Thanks in advance.
Rambo

Good evening all

I'm brand new here and I'm quite new to forums and french cars

I have a Citroen C4 grand picasso (2008) and a Peugeot 3008 (2012) I've recently changed an injector on my Peugeot and I'm after some help with coding it.

Is there anyone nearby South Shields, England who can help?

I saw on the list of users who provide...

Hi,
I have Peugeot Expert 2011 1.6HDi.
Been told the AC relay is no good as getting no power supply.
Can anyone
tell me where the relays are please.

I have this little collection of faults, and the car dropped into limp mode.

is it sane to put this together like this:

1. misfire on cylinder 3 (P1339)
2. rich mixture passed into exhaust gives the other two faults.

I'm hoping this can be fixed with a replacement caoilpack and plugs ?

Cylinder 3 is furthest from teh gearbox right ?

Filled my Adblue a few times without problems. The last time I did so the warning light on the dash did not go out and it continued to count down. Also got engine fault warning at one point. Service message also came up - but it was due and a service is booked. Given some poor advice that as I'd replaced the Adblue that the sensor was just playing...

I have a Citroën AX 1.5d, 1995, I want to have a second car for a spare to drive to work just cause my Citroën breakdown or go for an MOT. I have looked for parts available on 205 which I like the car, there is plenty, but I did not see any parts for auto torque converter, if it breaks or stop working, where would I find one on other Peugeot? If...

Just thought i'd share - Latest acquistion is a Toyota Proace for conversion to a camper. its a Peugeot Expert with minimal trim changes to Toyota.

I am a big fan of cruise control, and the speed limiter around town at 30 makes it much easier to concentrate on what's outside the car. I looked behind the steering wheel on the van and the little...

Hey

Have a Peugeot Partner 2013 Diesel, 9H06 1560cm3, 66.0kW (90hk)

I have e warning in the display Engine need repair and the risk of clogging of praticelfilter.

Fault codes that is active:

P1435
Multiplexed Additive pump. Can Network or pump fault
DTC status:
Permanent

P1434
Multiplexed Additive pump. Pump fault
DTC Status:
Permanent...

Hello all. I'm looking for a fabric dashboard cover for my van.

Anyone have a source for suppliers?

HI everyone. So we had quite an unpleasant summer with our Peugeot 807 2.0 diesel (2009 model year) this summer, and am now trying to figure out whether it’s worth fixing.

The problem started in late July with the dreaded anti-pollution system fault warning, with accompanying loss of power (I think due to limp mode). But on the next drive, the...

I have a 2010 Peugeot 207 with 1.4 petrol engine. ABS unit has died and I need to replace it ASAP because I really need the car working fine. However, most shops have ABS Unit for 1.6 engine. Can I fit unit from 1.6 engine or it has to be specifically from 1.4?

Hi again fcf Peugeot section...

Pug 306 2l hdi estate 1999/2000 phase 3.

I need to remove the dash to gain access to the heater unit to replace a leaky heater matrix.

Any help/advise/tips greatly appreciated.

Does the cars loom have to come out with the dash or can the loom be left in place please ?

I will be removing the whole steering...

Hi folks. I'm still trying to find an answer to poor running and acceleration. It's going in on wed this week for a full Inspection to check for Back Pressure and Vac/Boost leaks, but curiously it struggled to start recently.

Still no engine light on.

I'm using my cheap plug in ELM 327 with FAP app. The App is for Peugeot Citroen specifically....

Driving yesterday in the 206cc it started to rain the wipers came on by themselves with a notification of auto wipers active , heres the weird part.. then another message unblock fuel filter message followed. This happens each time i was notified the auto wipers were activated.

I'd like to get rid of the blocked filter message as i know it...

:shock:

New car stinks of dog pee ..

How do i take the carpet out 307sw ?
This heat is cooking the pee pee

Been searching the forum posts for info about the DW8. I am interested to learn what tech advances Peugeot made when they superseded the XUD with the DW8? As far as I can tell, they are similar. Change to dry liners and repositioned glow plugs and the addition of EGR & cat. The basic architecture appears to be the same. However, in my experience...

Every few days adblue light comes on.followed by engine management light, followed by the count down to no re start. Remove adblue cap, replace and over a mile or so all lights go out! Replaced the adblue cap and the same thing happens!!!! Any ideas? Once the lights go out it shows no fault codes....... Help!!!

I may be getting a Peugeot 106 for my sister but she's just reminded me that she needs ISOFIX. I think it was an option on this car. Registration is R965 JPA. Could one of the admins please check if the specifications for this car show if it has indeed got the ISOFIX and if not, if the optional kit is still available from Peugeot?

From my own...

Hi can anyone tell me which sensor or location is an 02 sensor bank 1 sensor 1
error codes P2231 and P0131 occational limp mode but an obd2 can clear and returns to normal. DPF doesn't appear to be blocked. no black smoke, no loss of power or reduction in fuel economy
want to get the right one changed instead of garage hit and miss.

Car broke down whilst towing our caravan. Engine fault, repair immediately light, esp not working and handbrake failed, even though it did work and the car went into limp mode. Brakedown cleared the code and we went on 2 miles before it happened again. Got took home. Local garage couldn't read some codes but Peugeot garage was saying particulate...

Anyone know if all front hubs are the same across the range??

Mine started to have a fair bit of a play in it now and killed the second wheel bearing in as many months.

207 110 1.6 hdi

👍

Hi as per title, looking for info on part numbers or equivalent for replacement springs for my 407 coupe, which is a 2006 with the 2.7v6 HDi engine. I don't have the vin number handy, but I'd hope this gives us enough to get the springs parts numbers? Thanks in advance :-)

Hi yhere guys ,i just got a 3008 decent year and millage ,my whife loves it ,the only thing is got it from an acction site ,and it has i belive parts missing ,if anyone knows what they are?i would like to take the caf down to dealership but it dosent start and stack in P ,was a nightmare to take it off ,i dont know how they put it on in the first...

Can anybody tell me the size of the rear hub nut please
changing rear discs
partner 2014 1.6 hdi
many thanks

Tried a few things from my previous posts with regards to smokey exhaust under load.
1. new egr valve
2. air intake complete clean out, intercooler, throttle body, egr pipe, intake manifold, all full of crap.
3. replacement map sensor
4. replacement maf sensor
5. new pcv valve diaphragm and springs
6. injectors still to be removed and...

Hi

Does anyone have a clue as to the OE part number of hose connecet to the marked part in the picture?

Thx

Hello

I recently purchased as 407 sw 2.0 hdi, it’s covered only 146k miles since 2010 when it’s life began.

I know the service book says the belt isn’t due to be changed until 140k. But I’m trying to find out if it’s already been done.

Could someone more in the know look at these pictures to see what they think.

I’m thinking it may have...

Hello, my wife has a 2008 1.6 e-hdi 115 2014, it has been smoking on acceleration since it was purchased last year, on renewal of the mot it failed on smoke from exhaust with particulate filter fitted plus the emissions are on the high side, a few things have been looked out without any change, today i checked the fuel injectors fitted they are...

Can anyone point me in the direction of a wiring diagram for a 1.4 8v 206s VIN VF3**************[VIN obfuscated, can be read by forum staff] The only ones I can find online cover Bosch and Magneti Marelli ECUs but I'm not convinced that's what I've got. I can't see any manufacturers marks on the ECU just two PSA stickers. Both BSI and BSM are from Siemens. I've even scoured the local...

Cannot turn off engine fault codes: U0118 P1434 P1435, adblue is filled in. Could it have Eolys also?

Hi. I have a 2.0 HDI 5 speed manual gearbox in my 2004 motorhome. The speedo sensor has leaked oil badly so I am fitting a new one. I can't find out how much oil to put in when I refill. I read 1.85 or 2.1 litres from different sources but I don't want to put too much or too little.

Oil specification would help and if anyone can advise the best...

Hi again again fcf...

Pug 306 2l hdi estate 1999/2000 phase 3.

The cabin fuse box ( and the under bonnet cooling system heater plugs relay/fuse box ) has a few green relays that seem to run hot to me.

Are these green relays all the same please ?

Which relays in the cabin fuse box control the windscreen wipers and wash wipe function please...

Hi folks. As in title. I'm struggling to find any info on how to drain the system. I'm going to remove the EGR today but it has a Cooler built in.

I notice there is possibly a drain plug at the very bottom of the pipework made of a plastic hex nut type. Assuming that is it but looking for clarification.

Thanks people.

I've googled like crazy to find the specs for the Peugeot 807 cargo but can't find anything.

Anyone know how long and wide items the cargo can hold if all the all the rear chairs are removed?

Good day everyone

I am looking at replacing the rear axle on my VF3**************[VIN obfuscated, can be read by forum staff] PARTNER VU (M59) SHORT VAN '600' 1.9 D 71 (DW8B)

Is there a difference between the Peugeot '800' axle and the '600' axle. In other words, will either fit with no modifications?

I am hopeful that somoene has some experience with this and can assist.

Cheers!!

Bought an '07 2.0 HDI about 6 months ago, it has been really good no problems. Last Friday whilst driving it just cut out. Completely. No lights on dash, all out. Turned ignition off and on again, normal dash lights on again but would not start. left it for 2-3 mins, tried again and it started. Managed to turn around, got about 1/2 mile and it did...

Am gearing up for some pretty serious works to my 405 Diesel Estate (na), which will include:-

Replacement engine
Replacement Gearbox
Replacement Clutch Kit
Removal of remainder of AC equipment
Investigation of possible slight buckling to OSF Inner Wing following an accident about 5 years ago
Investigation to structure, particularly difficult...

Hi, folks. I'm struggling to find a drawing of the vacuum solenoid locations and connected pipes etc. I'd ideally like one looking from the rear as I have the Peugeot Worksheet pics already.

Hope you can help me out. Thanks

Hello,
I have an very serious issue with my Peugeot 307 2001 2.0HDI engine code: RHY.
I have been living with this issue for more than 10 years but it happened only 1-2 per year.
The printed curcuit of the ingnition key was changed in the beginning of this year by an official Peugeot service and the issue appears very often but radomly, for...