Citroën

Moderator: RichardW

42805 topics

Page 302 of 857
- Jump to page:
Previous
1
…
300
301
302
303
304
…
857
Next

Most liked posts	Author	Posted	Liked	Forum
Recognising the contributions of Marc "GiveMeABreak"	Jay-Bruce	28 Mar 2022, 04:20	40 times in total	Citroën
Adblue tank repair details	Stuart W	06 Mar 2024, 15:50	7 times this year	Citroën
Diagbox and depressurising	Ceenine	15 Apr 2024, 07:11	3 times this month	Citroën
Citroen c3 picasso	mickthemaverick	13 Apr 2024, 20:08	2 times this week	Citroën
Citroen C5 2014 Tourer Exclusive. Possible to add interior boot opening?	RichardW	Yesterday, 22:41	Once today	Citroën

Announcements

Statistics

Last post

PSA Electrical Diagrams - Wiring & Symbols Codes Index

by GiveMeABreak » 09 Dec 2023, 17:48
Posted in Diagnostics
Replies: 0
by GiveMeABreak » 09 Dec 2023, 17:48 » in Diagnostics

PSA Electrical Diagrams - Wiring & Symbols Codes Index

The following will cover most basic equipment, but will exclude later systems & Tech.

PSA Electrical Diagrams Introduction - Function and Constitution of Codes
PSA Electrical Diagrams - Coding of Functions
PSA Electrical Diagrams - Component Coding
PSA Electrical Diagrams -...

Replies: 0
Views: 31777

Last post by GiveMeABreak
09 Dec 2023, 17:48
Citroen, DS Automobiles and Peugeot Official Part Number Requests

by GiveMeABreak » 15 May 2021, 13:55
Last post by GiveMeABreak » Today, 11:10
Replies: 2029
by GiveMeABreak » 15 May 2021, 13:55
1

…

132

133

134

135

136
First post

Please make all your Citroen , DS Automobiles or Peugeot Parts Requests on this thread

This thread is only for donating members who wish to request official part numbers or Parts Diagrams.

Please don't post technical queries or ask 'how to' questions here. Create a thread in one of the main Citroen / Peugeot Forums for these queries....

Last post

Please note 'NFP' = No Longer Available from Peugeot.

EXHAUST SYSTEM HEAT SHIELD

jackdad Exhaust A.png

(1) Exhaust System Heat Shield, part: 173214, £51.68
(2) Bold, part: 173213, £1.44

FRONT CATALYTIC EXHAUST MANIFOLD

jackdad Exhaust B.png

(1) Manifold, part: 0341A2, (NFP)
(2) Manifold Gasket, part: 0348J0, (NFP)
(3) Pipe Spacer,...
Replies: 2029
Views: 508598

Last post by GiveMeABreak
Today, 11:10
Airbag, Dashboard, Seat Belt & Airbag ECU Repairs

by GiveMeABreak » 24 Jun 2020, 17:01
Last post by 407 » 07 Mar 2024, 23:42
Posted in Useful links
Replies: 64
by GiveMeABreak » 24 Jun 2020, 17:01 » in Useful links
1

2

3

4

5
First post

Just for members to be aware that airbagteam.com based in the UK are offering a 10% discount to FCF members on any of their services.

The FCF does not endorse any company directly, but thought this would be of use to members.

Full details of their services and the discount can be found here:

Airbag, Dashboard, Seat Belt & Airbag ECU Repairs

Last post

Re the 407 door seal issue and airbag warnings, after a few days of rain and testing with the hose, I gave up as water was still pooling on top of the bottom door seal and then running inside the car.

My solution was to put a few holes thru the seal with a leather hole punch tool which seems to allow the water to exit (the door seal gets squashed...
Replies: 64
Views: 77818

Last post by 407
07 Mar 2024, 23:42
Important Information concerning access to PSA parts data

by xantia_v6 » 19 Mar 2020, 04:19
Last post by GiveMeABreak » 14 Nov 2021, 07:21
Posted in Forum News, Announcements and Issues
Replies: 88
by xantia_v6 » 19 Mar 2020, 04:19 » in Forum News, Announcements and Issues
1

2

3

4

5

6
First post

As some of you may already have realised, PSA (Citroen, DS Automobiles & Peugeot) have this week (from 16/03/2020) decided to close off free access to parts information.

The public version of PSA's ServiceBox, which is the official source for parts and information has had a freely accessible parts system for registered garages, and individual...

Last post

Please note: This Thread is now Locked.

Please Make All Your Citroen or Peugeot Parts Requests Here

All parts requests from this topic have been moved there.
Replies: 88
Views: 117457

Last post by GiveMeABreak
14 Nov 2021, 07:21
New PSA Heritage Parts for Classic Cars

by GiveMeABreak » 11 Oct 2019, 16:18
Last post by white exec » 24 Jan 2020, 16:49
Replies: 3
by GiveMeABreak » 11 Oct 2019, 16:18

First post

Parts for Classic / Older Citroen, Peugeot Renault Vehicles

This may be of interest to Members with older vehicles where getting parts is a struggle and for those not already aware of the site.

PSA are embarking on a project to provide some supplies of original and re manufactured parts for older vehicles and classics, and have made it a...

Last post

I'm trying them for anything showing up as NFP now.
Sometimes hit lucky.

Replies: 3
Views: 34703

Last post by white exec
24 Jan 2020, 16:49
Revised Easydiagnostics Discount Procedure

by GiveMeABreak » 03 May 2018, 17:22
Posted in Forum News, Announcements and Issues
Replies: 0
by GiveMeABreak » 03 May 2018, 17:22 » in Forum News, Announcements and Issues

Please note that there is a new procedure in place for members wishing to take advantage of a 15% discount off products from Easydiagnostics.

The old discount code that was entered into the checkout is no longer valid, as a result of the code being propagated over the Internet.

After discussions with Jim from ED today, we have agreed a new...

Replies: 0
Views: 37007

Last post by GiveMeABreak
03 May 2018, 17:22
Supersticky

by myglaren » 04 Jan 2010, 18:44
Replies: 0
by myglaren » 04 Jan 2010, 18:44

All sticky threads are now to be found in the new ¨Supersticky¨ forum - for the time being at least.

Replies: 0
Views: 21160

Last post by myglaren
04 Jan 2010, 18:44

Topics

Statistics

Last post

It's all gone quiet....

by RichardW » 16 Dec 2013, 13:15
Replies: 0
by RichardW » 16 Dec 2013, 13:15

:oops:

Xantia drop links have been getting noisier over recent weeks - was planning to change them over Christmas anyway. NS is original (154k), OS was changed a couple of years back, but despite fitting a Lemforder link(*), it has never been quiet. But this morning, realised all was ominously quiet....sure enough, just been out to look and the...

Replies: 0
Views: 188

Last post by RichardW
16 Dec 2013, 13:15
Can I put a steel head gasket on C4 Petrol?

by c4tobe » 16 Dec 2013, 11:45
Last post by Peter.N. » 16 Dec 2013, 12:11
Replies: 1
by c4tobe » 16 Dec 2013, 11:45

First post

I have a C4 1.4 petrol (2004), with blown gasket. The original gasket was the composite (paper-like) gasket.
I am trying to buy a new gasket, but so far i can only find the Composite type gaskets (Glaser, Cortec, erling brands)

I am wondering if there exists a steel-type gasket for this engine (OEM number is 0209.FL)?
Since the original gasket...

Last post

I have only used the laminated steel gaskets on diesels, if they make one for your car I don't see any reason why you shouldn't use it, they are certainly much tougher than the old ones. They use them as standard on the diesels now and they seem to last almost indefinitely.

Peter

Replies: 1
Views: 163

Last post by Peter.N.
16 Dec 2013, 12:11
Right sphere choice

by xantos » 22 Aug 2013, 07:52
Last post by xantos » 16 Dec 2013, 08:52
Replies: 6
by xantos » 22 Aug 2013, 07:52

First post

Can someone help me pick the right sphere choice as I would like to buy the whole set of 10 spheres and I don't want to mess up. :roll:
Have a 2.0 TCT Activa; year 1998 (weight 1410kg).

This one is for 2.0HDI or 2.1TDI (weight of car 1435kg)
onclick= window.open(this.href);return false;

This one is for 2.0 16V (weight of car 1300kg)...

Last post

Can anyone tell me what's the difference between markings of spheres?

For example: XA 45 FK and XA 40 FT
XA is for Xantia and 45 (40) is the pressure, but what do the last letters mean?

Replies: 6
Views: 642

Last post by xantos
16 Dec 2013, 08:52
Citroen Logo projectors :)

by Stickyfinger » 14 Dec 2013, 17:45
Last post by Stickyfinger » 15 Dec 2013, 13:00
Replies: 4
by Stickyfinger » 14 Dec 2013, 17:45

First post

Funky stuff !, just swap your normal door entry lights/wires into these :)...so here is your Christmas pressie !

onclick= window.open(this.href);return false;

Last post

But would it fail an mot in the future for changing from manufacturers original specification?
Not really a serious question. No, MoT would be OK as this is a courtesy light

Although on an all electric car changing lights could change consumption. Who knows in the future?
LOL...on WHAT Planet would ANYBODY EVER buy a Citroen Electric...

Replies: 4
Views: 293

Last post by Stickyfinger
15 Dec 2013, 13:00
C5 - (too) cheap?

by RichardW » 13 Dec 2013, 12:17
Last post by isisalar » 15 Dec 2013, 10:35
Replies: 29
by RichardW » 13 Dec 2013, 12:17
1

2
First post

As ever when the MOT looms (ok, it's 3 months yet!) and the car is broken (exhaust again, and drop links, possible ABS sensor, accumulator to change, needs new tyres!) my mind turns to replacement. Saw this C5 on Autotrader . Suspiciously cheap? Should there be a 1 in front of the mileage? Probably needs Cambelt, handbrake cables, exhaust, rear...

Last post

Mind you, I find myself having to repair the exhaust again - but then that's what happens when you keep them a long time!
Don't know where in the U.K. you are Richard but I've found the best place to get an exhaust is Jaystock. Certainly in England. Here's their website :- onclick= window.open(this.href);return false;
They offer free delivery...
Replies: 29
Views: 890

Last post by isisalar
15 Dec 2013, 10:35
got paint code, now where do i get paint?

by deano1970 » 15 Dec 2013, 09:16
Last post by Gibbo2286 » 15 Dec 2013, 10:30
Replies: 6
by deano1970 » 15 Dec 2013, 09:16

First post

ok,
through this forum I found where my paint code is, but where do I get the paint from?? I went to halfords yesterday, and surprise surprise, they don't mix my code?? it's a pretty boring grey but it's too big a job for halfords....so where can I get matching paint from?? they had loads of codes on their computer that were close,but none...

Last post

I bought an aerosol set (colour and lacquer) a few weeks ago for my silver 2004 C5, just looked out the invoice it was £13.21 all in but my local dealer always gives me a 20% discount so the normal price would have been £16.51 + vat

Replies: 6
Views: 269

Last post by Gibbo2286
15 Dec 2013, 10:30
undertray bolts

by boristhespie » 10 Dec 2013, 22:54
Last post by qprdude » 14 Dec 2013, 22:37
Replies: 17
by boristhespie » 10 Dec 2013, 22:54
1

2
First post

My undertray of me new car fell off today. I need bolts but the are different to the ones I have. Can't seem to find them on ebay.

Anyone able to help with a source. Dont want to go to dealer. They'll cost 7-8 quid each there probably.

onclick= window.open(this.href);return false;

Last post

onclick= window.open(this.href);return false;
Replies: 17
Views: 2593

Last post by qprdude
14 Dec 2013, 22:37
Rear suspension problem - thougts

by KennyW » 03 Dec 2013, 10:49
Last post by KennyW » 14 Dec 2013, 20:51
Replies: 9
by KennyW » 03 Dec 2013, 10:49

First post

Good morning All,

New rear spheres arriving today and thought i would start to get prepared :)

Unfortunately the rear will not rise to the high setting :( to put car on ramps.

I am thinking about raising the car with my trolley jack and starting engine again hopefully this will help.
Otherwise it will have to be raised onto the ramps.

Any...

Last post

Well guys and gals a quick update.

Bracket changed and suspension running, just changed the 2 rear corner spheres with the Xac tool.Saw the link after making the 'P' remover.
No problems but the anti sink sphere is another story. The supply pipe will not turn and the 9mm flared spanner I have appears slightly too big so will obtain 8mm and try...

Replies: 9
Views: 253

Last post by KennyW
14 Dec 2013, 20:51
2007 xsara picasso 1.6 hdi help please

by chrisf1 » 14 Dec 2013, 13:51
Last post by chrisf1 » 14 Dec 2013, 17:01
Replies: 2
by chrisf1 » 14 Dec 2013, 13:51

First post

Hi everyone I am a new member and have a problem with my wife's 2007 xsara Picasso 1.6 hdi. 2 days ago I power washed the engine and since then it has refused to start. I have disconnected, blown out with air and reconnected all the obvious connectors I can see the maf and 2 more in the same vicinity and the bloody thing will not start can anyone...

Last post

thanks for that I will give that the once over in the morning

Replies: 2
Views: 363

Last post by chrisf1
14 Dec 2013, 17:01
C5 Camshaft Exhaust pulley

by garethb » 14 Dec 2013, 15:03
Last post by Lighty » 14 Dec 2013, 15:48
Replies: 1
by garethb » 14 Dec 2013, 15:03

First post

I had been hearing a noise coming from my timing belt area and thought it was the water pump. I was doing a change on my timing belt/water pump change on a 2003 C5 petrol, and noticed that the exhaust camshaft pulley has a damper on the inside. However the damper has become lose and basically fell out when I took the timing belt cover off. I've...

Last post

I have seen this happen before, and have left the damper out. Doesn't seem th have a great affect on anything.

Replies: 1
Views: 323

Last post by Lighty
14 Dec 2013, 15:48
the Synergie refrigerator is a sauna now

by citronut » 14 Dec 2013, 09:40
Last post by citronut » 14 Dec 2013, 14:35
Replies: 3
by citronut » 14 Dec 2013, 09:40

First post

me daughters Synergie heater is now working fully again except the recirc,

turned out a flap motor had died, so its been switched around for the recirculation flap motor,

Last post

Hope you left it in the 'fresh air in' mode. :wink:

Peter

yes Peter
fixed not in recirc mode,

Replies: 3
Views: 207

Last post by citronut
14 Dec 2013, 14:35
C4 Petrol 1.4 litre fuel filter

by aneesh84 » 04 Dec 2013, 18:16
Last post by c4tobe » 14 Dec 2013, 13:28
Replies: 14
by aneesh84 » 04 Dec 2013, 18:16

First post

Hi,

This question is regarding a 1.4 litre petrol engine from a 2004 C4 belonging to a friend.

He recently ordered a petrol filter

onclick= window.open(this.href);return false;

This seems to be inline.

1. Do petrol filters need to be periodically replaced on this car?

2. If Yes, then where is it located?

Regards
Aneesh

Last post

At Citroen service website, it shows the filter in the diagram, but, there is no OEM code in the right panel (see image, part 11).

Anyway, I think the filter is inside the fuel tank and is not subject to regular maintenance.

Replies: 14
Views: 12732

Last post by c4tobe
14 Dec 2013, 13:28
Citroen c5 2005, rear suspension stuck after wheel change

by fredoj » 17 Jan 2012, 06:03
Last post by fredoj » 14 Dec 2013, 06:19
Replies: 10
by fredoj » 17 Jan 2012, 06:03

First post

I jacked up the rear of my citroen (c5, diesel, 2005 model, must be on hydractive III ) to change the wheels, upon completion, the rear suspension would not come down, I am not sure but when it was jacked up, I might have pressed the down button. Do you think this confused the computer system? or something is dislocated?
The height switch button...

Last post

If anyone has a problem like this, look at mechanical element first, I should have checked for the mechanical arm movement first, because it was mechanically stuck , so try and make sure nothing is preventing free movement of the arm

Replies: 10
Views: 8110

Last post by fredoj
14 Dec 2013, 06:19
Citroen C5 Shaking/Vibrating at about 60 M/h, funny noise

by fredoj » 01 Oct 2013, 08:49
Last post by fredoj » 14 Dec 2013, 06:16
Replies: 11
by fredoj » 01 Oct 2013, 08:49

First post

my citroen C5, shakes badly/vibrates at about 60 miles per hour. The vibration began when we changed the inner and outer CV for driveshaft
But now something else has began to happen, it is making weird noise (sounds like metal gently rubbing on another metal) when the car starts, while on gear 1, the noise reduces as you go to gear 2,
on motorway...

Last post

Worn out to the point of needing replacement, not just new grease and a spider kit. Too much slop.
I replaced the whole drive shaft too, took away the shaking

Replies: 11
Views: 1760

Last post by fredoj
14 Dec 2013, 06:16
series 1 Xantia keys

by mirafioriman » 08 Dec 2013, 23:02
Last post by mirafioriman » 13 Dec 2013, 21:39
Replies: 4
by mirafioriman » 08 Dec 2013, 23:02

First post

After killing one key the replacement has now died. I've located the issue. The microswitch pins need resoldered. I can see why this happens the pressing of the switch over time flexes the pins and weakens the solder joint.

Any ideas? After resoldering I thought about supporting the switches with resin to stop them moving when pressed.

Last post

Well it's fixed :)

I have re-soldered the four pins (and replaced the batteries) and it's now working fine. For how long remains to be seen.........

Replies: 4
Views: 241

Last post by mirafioriman
13 Dec 2013, 21:39
Gear box

by johninderbyshire » 26 Jul 2006, 16:32
Last post by abs66 » 13 Dec 2013, 20:41
Replies: 37
by johninderbyshire » 26 Jul 2006, 16:32
1

2

3
First post

Would you believe it but my gearbox has gone at only 86000 miles.

I have been told by citroen that it is a cf13 box. Does anyone know what and if it has been put in any other cars? Mine is a xsara 2001 facelift model 1.4 petrol.
I am trying to source one from a scrapyard as i am just going to get rid of it now.
John

ps citroen want £2396 for a...

Last post

Thanks for that info I will give that a go when it stops raining.
Got a Haynes manual although its been bugger all use with previous problems.
Thanks again, much appreciated.
Pete

Sent from my SM-N9005 using Tapatalk
Replies: 37
Views: 1977

Last post by abs66
13 Dec 2013, 20:41
Sphere removel tool Ebay

by SteveM » 12 Dec 2013, 19:35
Last post by Peter.N. » 13 Dec 2013, 12:00
Replies: 8
by SteveM » 12 Dec 2013, 19:35

First post

Just bought one of these, fast postage, ordered Monday afternoon and arrived Wednesday morning =D> .. Done 12 spheres this afternoon,(2 cars) and not one smashed knuckle :) .. Also makes them for the C5

onclick= window.open(this.href);return false;

Last post

For years I used a strap wrench made from motorcycle chain, I have always managed eventually to remove the spheres but not without difficulty. I bought one of these removal tools and its brilliant because it grips the sphere tight so you can hit it with a hammer and shock the brute loose - doesn't work with a strap wrench, to much give in it....

Replies: 8
Views: 308

Last post by Peter.N.
13 Dec 2013, 12:00
Berlingo - Out of fuel, now won't start

by jono_h » 07 Dec 2013, 11:33
Last post by jono_h » 13 Dec 2013, 08:32
Replies: 4
by jono_h » 07 Dec 2013, 11:33

First post

Sorry, me again. After 4 happy years, two problems in as many weeks!

2004 Berlingo van 1.4 79k miles.

I wasn't concerntrating this morning and ran out of petrol. Put a gallon in, but engine wouldn't start. Everything lights up on ignition position 2, but nothing on position 3 (not even a click).
Managed to get it started with a bump start,...

Last post

Right, a final update!

Issue appeared again last night. Followed the steps in the Haynes manual to try starting with the headlights on to see if they dim (Headlights dim - power to starter, possible starter fault; don't dim - no power to starter, power / earth or solenoid fault).

Indicated a power, earth, solenoid fault. Connected jump lead from...

Replies: 4
Views: 392

Last post by jono_h
13 Dec 2013, 08:32
Just Quickly - Early C5 8V Diesel

by addo » 12 Dec 2013, 10:34
Last post by addo » 13 Dec 2013, 08:21
Replies: 5
by addo » 12 Dec 2013, 10:34

First post

Do these all use the same rockers as Xantia HDi models (or was there any sort of change)? Got to order in a set for someone.

Thanks, Adam.

Last post

I'm not really involved in the job other than supplying some parts as a barter. Genuine rockers here are $120 EACH.

If I offered secondhand ones, they'd try to bargain me down. :x

Replies: 5
Views: 219

Last post by addo
13 Dec 2013, 08:21
citroen dispatch 2004 will not start

by goatty2 » 12 Dec 2013, 09:54
Last post by BX » 12 Dec 2013, 22:32
Replies: 3
by goatty2 » 12 Dec 2013, 09:54

First post

Hi
the van will not start with starter engine turns over easy but if it is towed or pushed it start straight away and runs normally.
have had it on the computer and it said nothing wrong but starter a bit slow and have replaced it.
engine turns over faster but still not start
any idea of what could be wrong

Last post

Richard W has said it all. The engine must turn fast enough to build the rail pressure. The less leakage the slower it needs to turn. The other factor is achieving sufficient air pressure and temperature within the cylinder for it to fire when fuel is injected. On most modern engines this is not a problem even after mega miles. Excessive injector...

Replies: 3
Views: 720

Last post by BX
12 Dec 2013, 22:32
hydractive 2 on xantia

by jacksun1987 » 11 Dec 2013, 21:40
Last post by Citroenmad » 12 Dec 2013, 17:39
Replies: 5
by jacksun1987 » 11 Dec 2013, 21:40

First post

Prob bee asked this question many times. What is the difference between hydractive 2 and normal suspension?. Hw reliable are they? Is it the same as the activia one. How many Spheres are on the car. What Spheres should i get for the car.

Picking up the new car tomorrow. It does need some new Spheres on the front.
Exclusive Estate 99 2 liter hdi...

Last post

Unfortunately (I'd love one!) an Exclusive is not running an Activa suspension system, maybe fortunately for you as it does reduce maintenance.

As said already, the hydractive 2 Xantia has 8 spheres, four corners, two soft, accumulator and anti-sink. Reliability is good but of course you have two more spheres to replace and the dioides which can...

Replies: 5
Views: 412

Last post by Citroenmad
12 Dec 2013, 17:39
Citroen C5 X7 1.6 THP tyres and pressures

by mitsos » 12 Dec 2013, 15:14
Last post by qprdude » 12 Dec 2013, 16:13
Replies: 1
by mitsos » 12 Dec 2013, 15:14

First post

Hello and greetings from Greece, before a month i bought a used Citroen C5 X7 1.6 THP exclusive 2010 model with 44.000 on the counter, i had driven it from Athens to Thessaloniki where i live, (the distance is 510 kilometres) and comparing it with my old Citroen C5 mk2 2000cc exclusive 2007 model was something else, the C5 X7 is awesome and in the...

Last post

Tyre pressure is indicated on the left side door pillar (Drivers side on RHD. Passenger side on LHD)

My 2.2l car has and is considerably heavier than the 1.6 I think. My pressures are (unloaded front 2.5 rear 2.3. Loaded.front and rear 2.6)

Have you tried the sport suspension mode for cornering? It certainly makes a huge difference.

Welcome to...

Replies: 1
Views: 253

Last post by qprdude
12 Dec 2013, 16:13
*Urgent C5 problem*

by Tully » 05 Dec 2013, 20:39
Last post by uncle buck » 12 Dec 2013, 00:14
Replies: 12
by Tully » 05 Dec 2013, 20:39

First post

Hi Folks

My C5 2.2 hdi semi-auto has suddenly developed a worrying problem.
When you engage gear (drive or reverse) it doesn't roll forward or back as it should.
Instead it feels like the brakes have locked on and needs plenty of throttle to get it going (especially bad in reverse).
Once going forward it's fine, in reverse it needs constant...

Last post

I had the same sort of problem with the handbrake calipers on the Renault, the handbrake lever was partially seized and the handbrake was virtually non existent. Oiling and greasing the lever did buy me some time and free it off a bit but the handbrake was still very poor and after a few months it was seizing up again.

I decided to strip &...

Replies: 12
Views: 732

Last post by uncle buck
12 Dec 2013, 00:14
User error....

by RichardW » 09 Dec 2013, 22:23
Last post by addo » 11 Dec 2013, 23:16
Replies: 3
by RichardW » 09 Dec 2013, 22:23

First post

#-o

Sporadic ABS light for a while, and Lexia fingered the OSR, the one that got mauled when I had the arm out earlier in the year. Found out why tonight... (Exhaust has gone again, so had to bodge a clamp on it - rear flange on main pipe has gone, so made a couple of 'straps' for each side of the joint and shoved them on with Jubilees - not gas...

Last post

A lot of ABS sensor wires seem to be nearly un-solderable alloy.

Replies: 3
Views: 222

Last post by addo
11 Dec 2013, 23:16
Xantia windshield washer jet, part?

by MortyDK » 06 Dec 2013, 16:50
Last post by citroenxm » 11 Dec 2013, 20:15
Replies: 7
by MortyDK » 06 Dec 2013, 16:50

First post

Dear all,

I have a late-2000 Citroën Xantia. And I'm not sure about the right word here ... under the engine hood, there are two small plastic assemblies, each containing two small movable nozzles, which spray liquid onto the windshield.

I need a new one of these assemblies, and I have searched for it but without finding. The closest I have so...

Last post

Ahh Yes Guy of course. That is a point, I forgot that it was added ti run out models. Ive not had much experiance of R reg Series one models, but its not a hard thing to add, its only the bonnet rubber seal with a tube on it... and agreed far easyer to mess with then the plastic tubes that go brittle.

Replies: 7
Views: 766

Last post by citroenxm
11 Dec 2013, 20:15
Service light.

by qprdude » 10 Dec 2013, 18:27
Last post by qprdude » 11 Dec 2013, 19:18
Replies: 7
by qprdude » 10 Dec 2013, 18:27

First post

OK, so I didn't really check before I started off, but a couple of miles from home, I noticed the service light . I stopped and switched off, then on again to see the Incorrect oil level warning. I poured a half litre in and checked the level. It was approximately just below a third of the way from the lower dipstick mark. The light stayed on. I...

Last post

Don't know if the DPF would completely stop blue smoke but I've seen a few DPF cars (my Saab) letting go with a trail when accelerating hard .

I can't even SMELL oil or diesel from my C5 exhaust. (Might be my old hooter of course!) #-o :oops:

Incidentally, where were you from in NZ? (if it's not a secret)

Replies: 7
Views: 302

Last post by qprdude
11 Dec 2013, 19:18
Dispatch 1.9 Glow plug circuit issues!

by Paulw79 » 09 Dec 2013, 18:01
Last post by wheeler » 11 Dec 2013, 18:32
Replies: 9
by Paulw79 » 09 Dec 2013, 18:01

First post

My Dispatch has basically got no Glow plug function at all, following probably poor advice we have replaced the Glow Relay, followed by the double ignition relay neither of which made any difference, I have new Glow Plugs as this was my first idea to change - however have not fitted them as it appears to be a bit of a access issue.

It starts ok...

Last post

Is this a DW8 or XUD engine ? The DW8 engine is very common for shutting the glowplug relay off if one of the plugs has shorted. It must have some kind of internal circuit breaker ?

Replies: 9
Views: 4552

Last post by wheeler
11 Dec 2013, 18:32
Xantia - temporarily moving lhm tank

by Jaf » 09 Dec 2013, 17:26
Last post by Old-Guy » 11 Dec 2013, 17:27
Replies: 3
by Jaf » 09 Dec 2013, 17:26

First post

Hi guys. I've got a lhm leak somewhere around the lhm tank/ doseur valve area (the car's lhd so the doseur valve's on the other side).

I need to move the lhm tank cos I just can't see where the leak's coming from. I'm losing 200ml every 200kms so the leak's now quite bad. When I remove the lhm tank to see the leak I can't run the engine!

I'm...

Last post

Under the LHM tank there is anti-sink valve. The end seal might cause this leak (see pic).
It can be seen without removing the tank .

My first thought too - it's the green seal. Be very careful how you fit the replacement; it's easy to pinch the seal as you tighten up the screw-in cap.

Replies: 3
Views: 479

Last post by Old-Guy
11 Dec 2013, 17:27
Xantia lhm leak

by ajw361 » 10 Dec 2013, 09:30
Last post by Old-Guy » 11 Dec 2013, 17:17
Replies: 4
by ajw361 » 10 Dec 2013, 09:30

First post

Hello everyone. I noticed over the last few weeks that our trusty xantia has developed an lhm leak. Mo have had the undertray off today to see where it is coming from. Can anybody advise from this picture what it is and what is involved with fixing it please? It sits at the back of the engine above the subframe.

Last post

If it's the rubber pipe, then it's the return from the front height corrector valve. No need to bleed or do Citearobics (though the latter is always good to do).

While you're there, check the tightness of the gland nuts on the pipes going into the valve body - use a proper gland-nut spanner and be gentle; if any are slack tighten up (gently!)....

Replies: 4
Views: 248

Last post by Old-Guy
11 Dec 2013, 17:17
Xantia 1996 ignition switch issues

by romie » 10 Dec 2013, 10:57
Last post by Peter.N. » 10 Dec 2013, 20:22
Replies: 12
by romie » 10 Dec 2013, 10:57

First post

Hiya, I think my ignition switch contacts are just about to die and just wondered if this a known problem area for my old Xantia? :/

Symptoms:
Start car and with car running and after glow plugs have stopped being powered.
Battery light comes on and my permanently installed volt meter shows around 11-12Volts, (which is below the normal charging...

Last post

..I think the old one's lasted remarkably well

256k and rising....

;) yeah, poor girl. To be fair she has endured a lot.
Citroen quoted ~ £150 for new ignition, think am going to have to make a panel mounted bullet proof version using three rockers and a push button :D

(gonna have to figure out some sort of security mind)

And perhaps a push...

Replies: 12
Views: 1354

Last post by Peter.N.
10 Dec 2013, 20:22
HELP!! Xantia TD Gear Selector Rods fell off!

by ecohouse1 » 06 Dec 2013, 11:00
Last post by Xantidote » 10 Dec 2013, 18:38
Replies: 9
by ecohouse1 » 06 Dec 2013, 11:00

First post

Driving to work in the storm yesterday and my usually trusty Xantia throws a wobbler and the gear stick goes totally loose in my hand and am stuck in first. Luckily only a mile from home so limped back and forced the 2CV into service against its will plus its freezing!!

Checked out the situ last night and the big rod from the gear stick has come...

Last post

Well, the harder they are to assemble, the less likely they are to pop off again :)

Replies: 9
Views: 243

Last post by Xantidote
10 Dec 2013, 18:38
Xantia Front & rear Washer jets

by Taffyrhys » 10 Dec 2013, 13:25
Last post by Stewart(oily) » 10 Dec 2013, 15:35
Replies: 1
by Taffyrhys » 10 Dec 2013, 13:25

First post

Hi All, my Citroen Xantia Estate HDI has just developed a strange problem. When you activate the front washer jets the water now squirts out the front and the rear jets at the same time. They also have less pressure?

Can any one tell me how they work, is there a valve for front and rear jets or a non reutrn valves etc? so i can have a look over...

Last post

Just had the same problem on a ford, you need a new washer motor, one does both front/rear sets, when a bit worn it does both simultaneously.

Replies: 1
Views: 154

Last post by Stewart(oily)
10 Dec 2013, 15:35
C5 2lt Hdi 51 / 116k hesitation when accelerating

by Jeff » 12 Nov 2013, 16:51
Last post by Jeff » 10 Dec 2013, 14:44
Replies: 24
by Jeff » 12 Nov 2013, 16:51
1

2
First post

Hi,

I replaced the mass air flow sensor in january (bought off ebay), this weekend the Engine Mamagement Light came on, then noticed same time car had flat spot in acceleration, assumed MAF as similar symptoms to earlier in year.

I removed and sprayed with unipart switch cleaner which is not supposed to leave any residue, when refitted and...

Last post

I was lucky as paid scrappy a tenner after taking maf off myself, 2 minute job.
Ebay supplier is also kindly exchanging faulty maf I bought 8 months ago.
One thing I have learnt is that maf sensors should be cleaned with a spray,yearly best practice.
Pulls up hills now when before cogging down to second which is unacceptable for a 2lt engine...
Replies: 24
Views: 4352

Last post by Jeff
10 Dec 2013, 14:44
05 C3 after replacement alternator

by citronut » 09 Dec 2013, 13:39
Last post by citronut » 10 Dec 2013, 12:44
Replies: 4
by citronut » 09 Dec 2013, 13:39

First post

after a customer of mine had a replacement alternator fitted to her 05 1.4 8V C3

it has acquired a random misfire on all cylinders,

the fault code are
P0300
and
P1336

the first one i think is a ling standing code which no one seems to be able to get to the bottom of,

the second one on a gooogly search says it could be various items at fault,...

Last post

whoooops i must had miss typed the P0300 into the gooogly search, as it comes up relating to a misfire now,

had another guy/freind check it out with his all singing and dancing Bosch analyer, which says its the cat at fault

Replies: 4
Views: 225

Last post by citronut
10 Dec 2013, 12:44
What second hand spares to keep for a C5 2l hdi

by hirameuser » 09 Dec 2013, 21:31
Last post by Peter.N. » 10 Dec 2013, 12:21
Replies: 5
by hirameuser » 09 Dec 2013, 21:31

First post

And before you post back an extra 2 C5's, I will explain further I live in a village 12 miles from the nearest motor factor or scrap yard and we only get for when 3 buses a week. After fun and games earlier this year when a 2 year old starter motor packed up after the nearest factors had closed for the weekend. I am compiling a list of what to...

Last post

The main problem is that whatever parts you stock they are rarely the ones that fail. We live in a similar situation but have two cars so unless they both break down at the same time we are covered. A spare car is certainly the best way, we ran XMs for 15 years or more and I had to chase about for bits for them until my wife wrapped one round a...

Replies: 5
Views: 224

Last post by Peter.N.
10 Dec 2013, 12:21
Dreaded front suspension rattle, HDI 110

by harryp » 12 Jun 2012, 11:42
Last post by taffy » 09 Dec 2013, 21:38
Replies: 18
by harryp » 12 Jun 2012, 11:42
1

2
First post

Hi all,
I have a rattle on the off side driving on roughish road surfaces at 40+.... but silent on a smooth surface. It was there before the last MOT in November which it sailed through. I was hoping they would tell me what it was as I couldn't find it and still not being able to find it is driving me doolally . I have checked and rechecked all...

Last post

one noise ive had like this apart from drop links ball joints is i once forgot to put the spring back in the brake caliper and as ive had droplinks go before and know the symptoms i had exact same noises lol
Replies: 18
Views: 6051

Last post by taffy
09 Dec 2013, 21:38
xantia mk 1 1.9 TD rev counter sensor location

by aerodynamica » 07 Dec 2013, 16:09
Last post by citroenxm » 08 Dec 2013, 22:52
Replies: 10
by aerodynamica » 07 Dec 2013, 16:09

First post

Where is it located?

Last post

Same as above greame ... needs replacement as it is breaking up or down which ever you like..

Replies: 10
Views: 237

Last post by citroenxm
08 Dec 2013, 22:52
gran turismo 6

by thefrenchconnection » 08 Dec 2013, 09:33
Last post by Timmo » 08 Dec 2013, 21:35
Replies: 4
by thefrenchconnection » 08 Dec 2013, 09:33

First post

Just got gran turismo 6 yesterday and looking under Citroen they have a 2003 c5 v6 exclusive,2000 xantia 3.0 v6,xsara vtr looking forward to driving these :-)

Marc
2001 c5 2.0hdi sx

Last post

i started out in forza 4 with a C1! cracking little thing it was! not sure however, i'd want to drive one the spec it ended up on the road, a pebble would shatter your spine! :-D
my daughter likes the pugs whe she gets a go, Mostly due to it looking like Grannies car! that said, the drivings not a great deal different between the two of them! :-D

Replies: 4
Views: 367

Last post by Timmo
08 Dec 2013, 21:35
vibration in the gear

by aneesh84 » 08 Dec 2013, 17:33
Last post by Peter.N. » 08 Dec 2013, 20:13
Replies: 2
by aneesh84 » 08 Dec 2013, 17:33

First post

When I drive above 110 km per hr(more than 2200 rpm), the gear handle vibrates. The rest of the car is otherwise stable and smooth. is this normal?

My car is 2.0 hdi Xantia 1999

Last post

I think that might be normal or perhaps something in the linkage transmitting vibration, I have noticed it on one or two cars.

Peter

Replies: 2
Views: 152

Last post by Peter.N.
08 Dec 2013, 20:13
DPF Removal

by RichardW » 06 Dec 2013, 12:28
Last post by Bob L'eponge » 08 Dec 2013, 17:31
Replies: 21
by RichardW » 06 Dec 2013, 12:28
1

2
First post

Now to be an MOT failure.... DOT Press Release

Not sure how they will check - if internals removed then it will look superficially OK, but a finger in the tail pipe will reveal all.

Last post

Old cars here are worth nothing, so a throwaway mentality pervades. One thing breaks, throw the car away and replace it because its cheaper.

Exactly so! The underlying problem is that in the UK people tend to see cars as status symbols, and the newer the model the better, which is why there used to be that ridiculous rush for the new plates each...
Replies: 21
Views: 2036

Last post by Bob L'eponge
08 Dec 2013, 17:31
slightly overfilled engine oil

by aneesh84 » 02 Dec 2013, 15:03
Last post by aneesh84 » 08 Dec 2013, 17:29
Replies: 7
by aneesh84 » 02 Dec 2013, 15:03

First post

I accidentally overfilled the engine oil on my Xantia 2.0 HDI.

The oil level is 2-3 milimetres above the max line on the dip stick. Are the levels very strict?

Will it be okay to keep it like this for the next 10000 kms when i will be going for the next oil change?

Last post

I checked today, it went below the max mark by itself :-)

And I didnt spot any oil leaks.

Replies: 7
Views: 882

Last post by aneesh84
08 Dec 2013, 17:29
Xsara - Key symbol and not starting - engine swap

by xsaras4ever » 01 Nov 2013, 14:11
Last post by xsaras4ever » 08 Dec 2013, 10:22
Replies: 10
by xsaras4ever » 01 Nov 2013, 14:11

First post

Hello again to the forum from France.

Our son's xsara DW8 1.9D estate decided to join our group of ill-functioning Xsaras by breaking its cambelt.

We popped the engine and box out, and the camshaft was broken in 2 places and one of the valves was stuck.

Rather than do the head with valves and a cam and then a new timing belt and head-gasket, we...

Last post

Its fixed at last.

Our son started cutting the module off the back of the BOSCH pump - a much larger lump of metal than is on the LUCAS pump.

On the last bolt he damaged the casing on the top of the pump.

So we unbolted the whole top and found a top off a much older BOSCH in our garage.

We fitted that, plus an old simple solenoid from the same...

Replies: 10
Views: 579

Last post by xsaras4ever
08 Dec 2013, 10:22
Turbo rebuild, Audi but....

by Gibbo2286 » 08 Dec 2013, 09:49
Replies: 0
by Gibbo2286 » 08 Dec 2013, 09:49

basically the same turbo as the KKK fitted to C5s, a good guide.

onclick= window.open(this.href);return false;

Replies: 0
Views: 179

Last post by Gibbo2286
08 Dec 2013, 09:49
Xantia S2 ABS warnning light Problem Please read carefully

by falling-out-with-my-car » 06 Dec 2013, 15:32
Last post by falling-out-with-my-car » 07 Dec 2013, 19:09
Replies: 11
by falling-out-with-my-car » 06 Dec 2013, 15:32

First post

I apparently have an ABS Warnninglight on in my S2 xantia, That does not have ABS.
The engine has just had the head replaced, so the engine has been lean't forwarsd to do this a new cambelt, pulleys and camshaft pulley have been installed.

any ideas please?

cheers Nigel.

Last post

The front pads are replaced usually twice a year and the wires are no longer connected
as they keep snapping.
The garage was sure it was the ABS light, considering that the dashboard came out in January for a new heater matrix
and the engine has just been rebuilt it is possible that somewherwe along the way because the car has not been used much...

Replies: 11
Views: 350

Last post by falling-out-with-my-car
07 Dec 2013, 19:09
www.citroencarparts.net/

by john » 06 Dec 2013, 19:17
Last post by kenhall1202 » 07 Dec 2013, 17:26
Replies: 2
by john » 06 Dec 2013, 19:17

First post

has anyone ordered from the above site? seems ok and i can do with a few gen. citroen parts.

Last post

Hi John,

That is an interesting find. I live in west Cumbria and might try them next time I have no option but to order from a dealer. Anything to avoid having any further dealings with those cowboys who go under the name of A****d C***k.

Ken

Replies: 2
Views: 439

Last post by kenhall1202
07 Dec 2013, 17:26
Xantia doorlock hard to operate with key?

by isisalar » 07 Dec 2013, 14:24
Last post by VertVega » 07 Dec 2013, 14:44
Replies: 1
by isisalar » 07 Dec 2013, 14:24

First post

Hi guys
This must be a fairly common problem, it's certainly happened to my Xantias as the milage creeps up. Usually stabbing the key well in and a bit of jiggling will work but it gets more difficult as time goes on. Plus gas, silicone grease, WD 40 all help a little bit but I think I have hit on the answer and I hope this might help anyone...

Last post

Very good point 8-) about the wear of the key.

Here is the picture you sent the link to us where it is clearly seen the smoothed edges.
It is not difficult to say which one of them has been used mostly :) .

Replies: 1
Views: 138

Last post by VertVega
07 Dec 2013, 14:44
Problem with rear suspension

by KennyW » 06 Dec 2013, 15:29
Last post by KennyW » 07 Dec 2013, 12:24
Replies: 3
by KennyW » 06 Dec 2013, 15:29

First post

Afternoon All,

I've just fitted a new rear bracket between anti roll bar and HCas a result of a broken link, suspension dropped (see previous thread).
I cannot get the rear suspension to rise and fall at all. What's happened :?:
I need to fit new sphere's to rear (3)

Kenny

Last post

Quick update, the HC was seized and with some lubrication and judicial use of an adjuster I have got it to move.

Next the spheres, I think I will leave these until next weekend when I can get access to a hydraulic ramp.

Kenny

Replies: 3
Views: 184

Last post by KennyW
07 Dec 2013, 12:24
Fault codes at start-up (sometimes!)

by garryd » 29 Nov 2013, 14:09
Last post by garryd » 07 Dec 2013, 11:52
Replies: 5
by garryd » 29 Nov 2013, 14:09

First post

My '53 plate C5 2.0I petrol auto estate has recently presented a load of error messages on cold start-up. Anti Pollution Alert, Catalytic Converter Fault, plus the Engine Management icon and Service messages remaining lit. The car won't pull away and it runs rough (just like my old MGB used to when it needed a carb set-up). If I switch off and...

Last post

I'd stick a new battery on it - C5s do all sorts of odd things when the voltage is low - and this is most likely just after you have cranked it....

Hi Richard
This is a nice quick idea (less expensive than a new cat!) I'll give it a try, especially as the car doesn't do many miles (I prefer to use my XM) so it could be getting a bit flat....

Replies: 5
Views: 314

Last post by garryd
07 Dec 2013, 11:52
I bought a Lexia

by Bandit12 » 28 Nov 2013, 08:10
Last post by Bandit12 » 07 Dec 2013, 07:53
Replies: 18
by Bandit12 » 28 Nov 2013, 08:10
1

2
First post

Hi Guys I've just bought a new Lexia and a mate of mine is giving me an old laptop with XP on it. My question is tha the lexia comes with 2 discs and lots of leads but no instructions. Any tips on which disc to insert first and setting up are gratefully appreciated.

Last post

Sorry to hear you have been unwell mate. Yes I tried the Lexia again and although I had to switch laptop off and on again it once again seems to be working on version 7.02. Ill hook it up to the car tomorrow and then I will know for sure.
Sorry to her your landlord not making a proper job of seeling your flat. If its any reassurance, house prices...
Replies: 18
Views: 1474

Last post by Bandit12
07 Dec 2013, 07:53
Xantia - Steering wheel misalignment

by lancia58 » 29 Oct 2013, 21:46
Last post by falling-out-with-my-car » 06 Dec 2013, 19:53
Replies: 9
by lancia58 » 29 Oct 2013, 21:46

First post

When I drive straight ahead the steering will is not align what I mean that its spokes are not horizontal and it looks like it turned. A month ago it was perfectly aligned and I didn’t touch the steering at all. How can this happen ?
The car is Xantia 2.0 16V Automatic make year 2000

Thanks
Zohar

Last post

Ahhha I couldnt get the new wishbone bushes to fit they seemed to big to me so I made the mistake
of filling the arm down so they would fit,
it passed the MOT fine there was no play in the beginning
but it cost me £70 for a new bottom arm with bushes already fitted to sort it out.
lesson learn't. Doh!!! :roll: #-o #-o #-o :rofl2:

Replies: 9
Views: 369

Last post by falling-out-with-my-car
06 Dec 2013, 19:53

New Topic

42805 topics

Page 302 of 857
- Jump to page:
Previous
1
…
300
301
302
303
304
…
857
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum