French Car Forum

hi im getting two codes popping up p11a8 and p11a9 inlet and exhaust timing, im going to check timing etc with locking tools but not sure how to check the cam dephaser sprocket to see if they are ok , if crank and cams are set with tools are there any markings on sprockets and if there is where should they be if set correctly, ive fitted new...

Good afternoon,
I have a 1998 106 1.1 Zest 3 which, I believe, has the TU1M(HDZ) engine with the Bosch fuel injection. A couple of months ago two issues manifested:

1) The engine misfired when accelerating
2) The idle speed would drop to 500rpm or the engine would stall completely.

Issue #1 was fixed with new spark plugs and HT leads.

Issue #2...

Hello All,

I was looking on mobile site to some pug508 from 2019..2020 and I see on some that the output power is 163hp. It is the same engine DW10CTED4 like on C5 III or is something wrong? I'm a little confused about the 2.0hdi euro 6 hdi engine on 508. :?:

Hi,

I've been browsing the forums for hours but cant figure this one out.

I'm trying to restore our 508's suspension as there are some creaks and clunks already. However, browsing partsouq.com and entering my VIN, it shows there are two different type of rear suspension for my 508. How do I identify which is the correct one?

The car is a 2013...

Hi all you clever folk,

Working on a mates 5008. VF3**************[VIN obfuscated, can be read by forum staff].
Alternator not charging, my mate bought a replacement from a breakers, Looked identical apart from it had a solid pulley, so I swapped overun pulley from original alternator.
It now charges but on Diagbox I get 2 codes
U1400
U1401
Alternator LIN NET,

I have checked all the...

Hi I have a 2014 peugot expert 2.0 rhh, I've replaced the engine and had the turbo reconditioned as a precautionary. Since I've put it all together I've no boost and this fault code. Would anyone have a diagram of the turbo/ egr vacum and power connectors? I've checked for vacum leaks etc to no avail,and I'm now thinking is there an issue with the...

Hi there i have a Peugeot partner combi 20hdi 2004 I've been trying to get a new starter motor from eBay but because there's so many and mine as no numbers can anyone tell me what teeth number i need it's a DW10TD engine if that helps please

Hi,

Car has complaint about a fault P15B3 (00) few days. First there was ang EGR code P042F. Reseted it while driving. Came back in a minute.

Reseted again in the evening and has not appeared since.

However, soon I got a persistent P15B3 that seems to refer to additive. I thought car only used addblue, but apprently not. I've got 164000kms....

Hi all,
Last month I replaced the BPGA on my 2017 308sw. So far, all is well.
But I was wondering if it is possible to test the old unit to trace the fault(s) - probably the relay?
Can anyone suggest a methodology?
Many thanks

I'm hoping Wheeler can weigh in on this with their venerable reputation:

The last two hot days I've driven my car home from work - not a long distance, the rev counter is fine to start with but after revs have been up a little the needle drops to around 200 rpm, not representative of the engine speed. It does go up when the revs go up but not as...

I have a 2004 Fiat Scudo 2.0 JTD van, identical to the Expert. Recently I needed to replace my speed sensor that is mounted in a hole on the back of the diff. I bought a new Febi item that checked out on being compatible with the Fiat part number.

When I took the old sensor out, I found it was identical to the new part, except it doesn't have a...

Hi,

I bought Multifunctional Dual Port OBD Charger Single Port Output 5V

so I can have a USB port for charging my phone.

But if I leave this adapter plugged in ODB port for three days, without starting engine, it will drain my battery!!

How this is possible? Is it fault of this ODB adapter or something wrong is with my car?

(I use same...

Hi, I've just come across this site while searching for a clue. Could anyone help me please identifying a part that leaks the fuel? I attached a picture. The blue circle shows the place of the leakage and the red is the part I am curious about. Thank you very much!

Hi guys,

Unfortunately one of my locking wheel nuts snapped a year ago so i got a new set from Peugeot last year. Annoyingly, possibly the second time i used the key on one of the wheels, another locking nut broke on me. Does anyone recommend a good set to buy that will fit my Peugeot 508 19 wheel please? maybe tempted to buy just 4 normal bolts...

I don't suppose anyone knows the correct antifreeze type for a 2017 Peugeot 3008 1.6 Bluehdi?

I would like to top up the expansion tank, which is showing just over half and hasn't dropped in the year I have owned the car. The current fluid, which I assume to be factory fill, is very clean as is the tank but I'm stumped by the colour, which is...

My Peugeot 508 SW GT (2016) has a heads-up display which is supposed to pop up when you start the engine.

It sometimes doesn't pop up.

Can anyone recommend some kind of user intervention ? Silicone grease...

It's right up on the dashboard close to the windscreen and pretty difficult to access.

Thanks

Hello guys im new around here.
So i have the next issue.
I have a 2009 peugeot 107 1.4 hdi with no battery, i try to jumpstart it, but it doesnt work, so i bought a new battery and my gf try to conect it and she connect the battery terminal on the wrong side ( she switch positive and negative), it was just a few seconds, but now i check all the...

Hello,
Its time to renew the timingbelt on my Peugeot 407 with 2,0 petrol 136 hp RFN engine. It says that it has to be renewed every 6 years, but since the car only has run about 2000 miles since last and has being kept in a garage i wonder if i can wait until the cambelt is 10 years? As i understood it Citroen has the same engine (RFN) and there...

Hi all,
For the past few months every time I've started the 3008 when the weather outside is hot
The air conditioning blower fan immediately started working at full power without the possibility of
lowering its power and without the possibility of turning on the air conditioning (buttons at the air conditioning screen do nothing but the touch...

Hi Everybody.

Having recently purchased a 2002 Boxer based motorhome, I am going to change the cambelt and pulleys as I have no idea how old the existing ones are.
Engine on about 60k so I guess worth doing.
My question is -- Are there any tips anyone may have, or any special tools required to do this. Workshop manuals for this seem somewhat...

Hi All. Can someone post the servicebox diagram for the DPF sensor wiring for a 308 cc 2.0 Diesel? I've already changed the sensor but still getting a P0471 error. I've disconnected the sensor plug and still same so assume it's a wiring issue.

What is your advice for me on buying and repairing damaged 208?

Hi

I have a 2010 3008, the boot has all of a sudden stopped unlocking therefore I cannot open it. The fob and the interior unlock button doesn't open it. Is there any way I can get it back open? Is there a fuse that may have blown preventing the solenoid from working?

Hi there,

The door mirrors of my 2017 308sw no longer retract on fob lock. Also when driving the mirror housing is look, ie any motors used to stabilise the mirrors are not energised. Both the mirrors can be manouvered from the drivers door buttons still though.

Fuse, wire, contact? Just wondered if anyone might be able to assist.

Many thanks

Hi everyone! I'm having a very vexing problem with DiagBox 9.150, in short:

I own a Peugeot 208 II

I created an account on the official Peugeot/Citroen website and purchased a token.

For some strange reason I couldn't download DiagBox as there was no link to do so, so I found one online.

I connect to the car using the PC and the OBD cable, the...

Don't know if this warning is important or if it can just be ignored. No error detectable via the dashboard but Lexia-3 interface shows error P1153 regarding calibration of throttle lower stop.

Hi!
My name is Daniel and Im writing from Portugal. After reading lots of topics here, I decided to write explaining my problems and making lots of questions hoping someone can help me.

Resume of problems & questions:

1 - The van had two episodes of serious trouble in injection (one injector stucked on open position I think) , making a very loud...

I am trying to program in a new key to my import but it won't program with diagbox I know euro peugeot and japenese use different frequencys is there any way to change the frequency or to program in a euro key to a japenese car

Thanks tommy

Sorry if this has been covered before, but not finding anything on search.
Peugeot 208 2012 1.4 petrol manual 5 speed box.
Busy changing the top mounts and of course I managed to let the drive shaft slip out of the box. Result unknown quantity of gear oil on the driveway!!
Can't see anything obvious on the box, so how do I refill?
How do I know...

I know that the oils in this gearboxes should last a lifetime.
But I think my car i almost on its second life time 😁

It has traveled 380000km now and lately i sounds like the gears mostly from neutral to first gear clonks a little louder. And the oil and job is not such a stretch either.

Is this a waste of time or should i do it ?
I guessed that...

Please see your private Messages

Car peugeot 5008 2017 1.6hdi the new model
Hallo i noted that my right door dosent lock, side mirro do clap in but the door is still open.
i cant hear the lock clicking inside the door.
what do i look for?
Regards Kenneth

my car, peugeot 207 1.6 petrol. crank not start problem. I believe there is no power to the ecu. I notice the is no power at the f15/30a fuse also. maybe relate to ecu. what is possible sensor that cause the ecu no power. Thanks for any help

Do eny one have a diagram of the wireing of the the right door, with color wireing do what.
Regards Kenneth
Its a peugeot 5008 2017 1.6 hdi new model.

Hi All just go my hands on an old PST ambulance it arrived as a non runner starter and battery its runs, cluster was flashing air suspension unavailable I know it has a continental factory fitted kit, check all fuses I could find cannot see any blown fuses I also have no can communication when connecting foxwell diagnostic for checking all systems...

Hi All,

I have a Peugoust 5008 203 1.6 HDi with a ECG gearbox

A couple of weeks ago I got the Gearbox Faulty message on the display followed by it being impossible to shift into any gear.
Selecting any gear briefly flashes the selected gear on the display (R, A1 etc) before dropping back to N

I haven't checked the actuator fluid not sure how I...

Well, now i have a fuel drip coming from the rear end of the fuel pump. Between the aluminium body and the big black steel ring on the end of the pump. I,m trying to find a diagram for the pump, where is there one ?.
And is it an easy job to do or a pain ?. Is there a gasket or o-ring involved , Funny how its only started leaking in very cold...

Hello

I have a problem with remote locking on a Peugeot 407, it worked normally until today
I can't unlock or lock the vehicle with the remote key
The central locking works inside the vehicle when the lock button is pressed
I bought a new key and programmed it, because I thought the problem was in the key, I checked again and the batteries in...

Hi all. Car is 2011 308 SW 2.0HDI. I've got an engine light on and aircon has stopped working (compressor clutch doesn't engage). I scanned for codes and I'm getting a host of sensor error codes which I'm guessing all share the same 5v supply: aircon pressure sensor, DPF pressure sensor, turbo repeat sensor to name a few. I also get P2670 and...

Hi, for about the last 12-15 Months my 508 Sw has had a weird issue, intermittent stalling when stopping at traffic light the rev counter gives a small blip and then the engine just dies. No faults are showed on the display no warning lights etc., Car restarts first turn of the key and stalls again unless I give it some revs and hold it above...

Just want to post a question about my 207 jumping out of reverse after a clutch change perfect before for at least two years never a problem before

Hi,

I've recently picked up a 2015 Peugeot 308 SW GT, with the 2.0 diesel engine and auto gearbox. I've just completed a head gasket on it which is a job I hope I never have to do again, but it seems to be ok, so my attention has turned to the gearbox. The car has covered 102k miles, and as far as I'm aware has never had the gearbox fluid...

Hi All,

I hope this hasn’t been asked a million times before. I need to change the rear discs on my wife’s 2010 207 vti as they were an advisory on the last MOT. Are all the rear discs the same, there seem to be so many types listed online that I’m getting a bit confused? I’ll only put good known makes on.

Also, does anybody know the hub nut...

Hi Everyone, i have this short rattling sound when i release gas pedal when idling and i hear it when press and releasing while i'm driving in 1st 2st gear. It comes from turbo or behind turbo. What do you think it can be? it's like vibration. I asked too many mechanics, some said turbo, some said engine or manifold. Please help me out if anyone...

Hi All:

Fault code P0444 (Purge Control Valve OPEN CIRCUIT): Lots of popping sounds that increase with more throttle then amber Engine Light then starts about 8 times more (with no popping sounds) then will not start at all at ninth attempt.

Can this Fault code cause a non-start condition...

Thanks in advance:

Hi

As per the title, with exhaust fumes too. There is lots of stuff on the injector second closest to the gearbox. Is this due to the injector bolts loosening over time and is there a permanent fix for this?

Thanks

Hi all! I have a Peugeot Expert 2.0, AHZ engine on a 14 plate.

Recently it went in to a sort of 'limp' mode and it felt like it wouldn't boost above 3k. Code came up as P2566. I changed the solenoid on the back of the engine, 98 018 876 80 and the code has disappeared, however it still is not running as should, with the same 'lack' of boost above...

Hello Gearbox Experts,

I need your assistance! 👊🏼

I'm searching for a new gearbox for my 1990 Peugeot 205 1.4 CJ (engine: TU3M), which currently has an MA5 2CA43 gearbox. I'm trying to determine which gearboxes are interchangeable with mine. I found a gearbox ratio guide, but will that help me identify which gearboxes will fit my...

Hi everyone, I've read many of the threads here regarding using Mobil LT 71141 for the AL4 gearbox.

I've got a 2007 Peugeot 2071.6 vti Automatic coming up to 110K and I'm certain the transmission fluid has never been replaced.

I'm hoping to get some confirmation if the following oil linked below will be okay ?

Thanks

Hi all I'm new here hope you can help I have a 2014 Peugeot 308 16 hdi 158 thousand on the clock owned it about 6 months and everything has been fine with it

Yesterday engine management light appeared and on the stereo it Said engine fault see dealer or something like that

I have a topdon bt800 I plugged it in and it had a few faults which I...