French Car Forum

Hello,Im interested is it possible to enable currently cruiese speed info on multifunction type c display?It is similar like this one?Tnx

Hello Looking for a how to, or some form of guide on replacing clutch for a partner 1.6 2010 van. This clutch was replaced 3 years / 50k ago by a garage but started to slip so looks like a new one required.

I have found this link on youtube I'm hoping its similar?

Done a few clutches and engine replacements in my time, how long does this...

Hello everyone.

Yesterday I took the workshop to repair a leak of automatic gearbox oil.
When the car is returned to me, all washed, I see that the rear parking sensors do not work.

Display error: Parking assistence system faulty.

I talk to the people in the workshop and they tell me to take it today to see it.
Before taking it, I diagnose it...

Has anyone done one of these. I think I may be trying to over complicating things, plus pictorial instructions do my head in. The kit is a Erich Jaeger 736941. I've got the separate plugs in the LHS cubby hole and it's seems too straight forward to be true. If I've got it correct I need to cut the large Black/Red connector off, splice a spade...

Today at 12:28 PM
Add bookmark
#1
Hi,

has anyone managed to get the front bumper off of a mk1 rcz?
i have followed the guide on servicebox but the bumper does not pull off and I have given it a hell of a tug. All clips and screws are off, the push clips have been pushed. The bumper moves slightly back and forth but feels like there is something...

Hello,
I have a 2010 pug 207 1.4i. I was having problems with water ingress on my pug and random problems. After trying to see some fail codes/run parameters the engine died 2 times while idle, after the 2'nd shutdown the steering rack died and now my car has no more assisted steering. I have no steering fail codes on the Delphi autocom however I...

Hi.Does anyone know for what purpose is blue connector for fuel filter?There is no connectors on fuel filter just blank plastic space as you can see on picture..?Tnx

Thanks for letting me join the forum Just a quick question to start on my journey to getting my flipping 2.0hdi expert (mk1 yr 2000) to start.
I have replaced the fuel filter housing and connect up the push fit pipes but can someone confirm which way round the two pipes for in the bottom.
As you face the engine the green clip is on the left and...

The guide pins I have ate differ from each other, 2 of one type and 2 if another

Anyone know what pin goes where?

I'm assuming one for top one for bottom.and not 2 for left and 2 for right

Hi, first post on here.

06 plate 307SW 1.6 Petrol

I replaced the heater matrix some time ago, which was surprisingly easy....until I came to reattach the hoses to the bulkhead pipe stubs. I managed to mangle the horseshoe-shaped clips :x and in the end replaced the pipes with 19mm heater hose and jubilee clips.

I've never been particularly...

As above I am buy my son first car is will be 106 1.5D 1995 or 205 1.1 with no injection 1994 both the insurance is only £6 difference same road tax cost. But this car is very old, so the information is very few, I am try to find out what is the mpg on both can do? I hear someone say the 1.5D can do 75mpg is this true what about the 1.1 how many...

Good evening folks!
Trying to help my son out with a newly acquired Pug.
When idling it sounds as if it's Missing but is ok when driving or revving it a bit above idle, the eml is on also. He put an obd reader on and it showed 2 codes:
P0354 for which he replaced coils which hasn't helped.
P1340 is the other code but unsure what this relates to....

hi all, whilst trying to get the van out of the barn for its mot yesterday, I lost any use of the accelerator (dead pedal) and caused the EML. subsequent gentle pressed of the pedal will extinguish the light and the revs will rise a little, then back to no throttle/revs and light on again. Having idle speed only, I managed to get it parked again...

Hi,how I can program new remote key via diagbox?Where I can find pin code?Tnx

Need so help as where to start looking:
was out yesterday in 306 cabriolet (1.8 16V, 2002 registered), was fine all day until i went to shops, parked up ok, went back to car and would not start (it tried to fire up once but died straight away), battery fully charged and spinning engine over but just would not fire up. (It has a new fuel pump...

Hi ,
Has anyone else had this problem ?
My daughters car (2013 1.2 82 hp 208) started getting noisy in the exhaust area but at first I couldn't find anything .
Then the occasional fault relating to the sensors either side of the Cat .
Eventually the noise got worse . This is what we found
IMG_1307.JPG
IMG_1308.JPG

There was also another...

Hi.Is there any tutorial step by step how to remove dpf filter on 307 1.6 hdi.I have tried but there is no space much,and youtube tutorials are not clearly..

Hi there, a quick question if anyone is in the know?

a friend of mine took the comms 2000 unit off his 54plate 206 1.4 car to try and determine where the airbag fault was on another car, same year. The airbag light went out but nothing else worked and the car wouldn't start. so he put it's original one back on, everything ok other than the airbag...

Hi All
This is my first post hopefully in the right place and maybe some help.
My beloved 407 coupe engine has gone to the afterlife :( .
And the boss says it needs to go as i already have 3 projects with cars on the go.
So my plan is to remove the front and rear seats and make a nice set of seats for my man cave :-D
my issue is i would like to...

Hi,
I want to order if possible the Cd with the latest firmware to my radio/gps.
I know that the latest one is rneg_D_R50b_R50.03 , can someone tell me the part number of the cd?
I could only find this information (Peugeot Citroen DS 9691894880 SOFTWARE CD) but this is not the latest one.

Thanks in advance
D

C4 Picasso 1.6 57 plate vin VF7**************[VIN obfuscated, can be read by forum staff]
heater aircon fault
was told by repair centre needed a new fan blower its dead on all speeds plug in new one (£185) no differance at all totally dead - i have 12volts at it on the two thicjk incoming wires but no fan running at all - if i disconnect the fan from the speed control module and put 12...

Is it possible for an expert to identify if there is something wrong with my BSM? I have some weird issues with my car where it suddenly can't lock it with the remote or key once I parked it if I drive from home to the gym for instance. So it wont lock, and it wont start again, once I turn the key it's absolutely dead, no sign of life whatsoever....

Hi all, thank you for any info here!

I am considering (i have actually left a small refundable deposit) a 2011 508sw 1.6 auto. However, I also have seen a 2015 308sw 1.6 auto, for the same price.

I cant seem to find a low down on the differences between the cars. Are they essentially the same but in a different skin? Are they both manual boxes...

I have a little oil in my air-intake system, and when accelrating, it sounds like fake air from the engine. If idling and reving up the engine, there is no sound.

I'm suspecting it's maybe a bearing in my turbo? Since it's only under load the sound is there. (And that should also could cause oil in the air-intake system?)

What else should I look...

Morning all,

Over the weekend I fitted a 2nd hand engine into a Peugeot Partner which had a failed engine. The engine code is DV6DTED 9HF.

The engine runs smooth and there are no fault codes stored however if I rev it from idle there is a lot of black smoke from the exhaust.
It doesn’t seem to do this when driving the vehicle just if it’s parked...

Hello! If somebody can help me about knocking somewhere around camshaft(up side of engine).
I have that knocking last 40 000km and now that is more worse..My car have now 220 000km.
I try to investigate where is the problem and was open camshafts and change valve lifters and problem doesn't solved.
Please if somebody have idea or experience that...

Would very much appreciate some help/advice on my diesel leaking problem. Was having a great time stealth camping in Scotland before I got a strong whiff of diesel and a small puddle appeared. I braved it and started my drive back. Managed 90 odd miles before she packed up and thankfully got home with Green Flag recovery. I've been out there this...

Hi to all Expert aficionados,
I have a leak on the hose which connects the expansion tank to the lower hose set. Does any one know the common name for this hose and where one might be got from.
Thanking in advance.

In December my car out of the blue began kicking and was undriveable. Had it towed to a garage they said the thermostat was leaking and it had gotten into the ECU but it may dry off and be ok. Said they'd put a new coil pack in and it was driving fine at the moment. Took the car home, it wasn't fine at all and the kicking began pretty quickly....

Hi new to this forum.
I bought a 2008 Peugeot 308 1.6 vti a few days ago for a cheap run about but now having problems with it. When we bought it we already knew it had a problem with the temperature sensor straight from start up hot or cold get the engine to hot and temperature gauge shooting to the red so was going to replace it this weekend....

Hi since yesterday I hear this noise coming from this part of engine..Anyone know what is it?

Photo 05-03-2020, 17 06 47.jpg Photo 05-03-2020, 17 06 11.jpg Photo 05-03-2020, 17 02 13.jpg Hi,
I have a Peugeot 3008 2010 0U_ MPV 1.6 HDI MPV 1560ccm 109HP 80KW (Diesel) and I´m missing one of the Roof Headlining Fixing Clips. I need to replace the one is missing but I don´t know the code for that specific clip so I could order online.

Maybe...

I started my 206 fine but as I pulled out it cut out. Now when I turn the key the ignition comes on but it will not even turn over. I have tried a jump start, I have connected a diagnostic reader to the OBD but it cannot connect to the ECU. Ignition displaying eco mode. Any ideas please?

The ambient ouside temperature readout on my 2010 Peugeot 207SW is about 11 degrees Centigrade too low. I know that you can adjust this on some cars .. but does anyone know how to do it on this model? Very grateful for advice. Thanks Jim

Hello,
I hope you can help me with experience or suggestions.
I have a 508, 2012, 1.6 e-Hdi from a few days. After attaching it to a Chinese Lexia, 20 different errors accumulated 5 in BSI and 15 in ECU.

The car was empty of DPF additive. We filled the tank and reset the level through the diagbox.
Then we did a DPF cleanup program with three...

Hi all,

I think I need to change the thermostat on my 407 so I'm doing a bit of research before I start buying things and wielding spanners.

Am I best going for a thermostat on its own, or one with housing? Any recommendations on which brand to go for?
Is it worth replacing the coolant completely? Recommendations on brand?
Any guides, advice...

Hi all
My son has just aquired the above mentioned vehicle vin VF3**************[VIN obfuscated, can be read by forum staff].
He says it never seems to get above 70 on the temperature gauge on a drive, although when stationary and engine running it will creep up past that towards 80.
Checked rad hoses and all are getting hot and heater works nice and warm,all direction settings work and...

How many electrics are meant to be under the drivers seat?
There is a mass of wires under mine and includes a control box for a wheelchair winch, an isolator and what looks like connections to a small battery thats been removed.

I'm going to put in a split charge for a leisure battery soon so do I need the isolator?

I need a help about purchase a tuning chip that plug with common rail to increase the pressure on fuel to making more efficiency and more power, because my car turbo lag is horrific between 1,600 to 2,000 rpm on the 5th and 6th gear make my motorway journey ever more difficult to pull off quickly and is too sluggish for overtaking to pass the...

I bought a 2010 boxer 2.2 xlwb 2 weeks ago and have had nothing but hassle.
First the dealer had put in a new battery that would only just start a fiat 500 so he brought me a bigger battery that was in good nick this went from fully charged to under 10v in less that an hour (never even got it in the van)
So I shelled out for new battery but its a...

Hi there !

Finally i got all the tools needed for the timing belt replacement.
I've done all the steps until i've reached the timing belt zone (removing engine support, remove accessory belt, etc etc).

At this point, i have a problem and i need your advice.
First thing i have noticed, is that the Camshaft pulleys are different from the manual,...

While error code reading the 308 for a problem with engine I had the following code returned as well.

B1003 54 Secure configuration fault. This is the COMBINE_UDS ECU and under properties it says:
Cause - Local
Status - Present
Characteristics of the fault - Absence of calibration

It seems to be something to do with the dashboard.

Any ideas?

I have been replying to a thread about a 405 coupe. It's suddenly disappeared, why ?

Hi all, I've just joined the forum in the hope that someone may be able to help me. In October 2019 I purchased my lovely 2012 5008 1.6HDI. Despite a few minor issues it's been a great car so far, one niggly issue is my EGR valve is showing a fail on OBD reading but the car 99% of the time is perfectly fine with the occasional little bit of...

I bought a 2015 508 SW yesterday, so far did about 520 miles to get it home, really nice car. :roll:

One quirk it has is that the infotainment system puts up a message that the system temperature is too high, restricting volume. The volume is then restricted to 15.

Yesterday was a cold day so the interior heater was at HI and the message came...

Well didn't expect to be back quite so soon! Took 307 to Halfords for an MOT with it's nice new fuse box installed and it failed. Checked discs & pads, ground off lip from discs and measured the thickness, rear 7.4mm (min 7mm) and front 23mm (min 24mm). I intend to replace pads & discs but no time to get, at a reasonable price, and fit before MOT....

I have a 2007 407 2.0 HDI coupe, fault code p2033 displayed. Can you confirm part No for my EGT sensor is 1618PG/ SH/ 30. And are there any less expensive variants I can use.
Many thanks.

Hi guys,
my airbag light came on after i removed the airbag of the steering wheel and lubricated the inside of the steering wheel with WD40..
Do i need to make some process to reset the airbag light or did i damage the circular connector of the airbag with the WD40?

Ok guys I need some help, the wife's 5008 1.6 HDI 112 EGC (61 plate) is throwing up some codes today.
It's got 68k so not a high miler.
This is what my cheapo reader comes up with.

P0263 Cylinder 1 contribution / balance

P0559 Break booster pressure sensor circuit intermittent

U1108 unidentified code

U1113 unidentified code

U0103 lost...

Hi all A couple of weeks ago I was on a short journey when suddenly the dash stop warning light came on then everything on the dash flashed on and off and the speedo stopped working. I pulled up just down the road just a short distance from where I had to go. When I returned and tried to start, the battery would not turn the engine over, This a...