Peugeot

9378 topics

Page 94 of 188
- Jump to page:
Previous
1
…
92
93
94
95
96
…
188
Next

Announcements

Statistics

Last post

Takata Airbag Recall Documentary

by GiveMeABreak » 06 Mar 2025, 17:55 » in Citroën
1

2

3
First post

Given the number of 'After-sales campaign' notices concerning Takarta Airbags I have been made aware of when looking up parts from PSA for members, I thought I would post a link to the following documentary that may be informative concerning the issue with these igniters.

According to Takata, the chemicals in the airbags’ explosive charge can...

Last post

An 'eejit' in admin has just noticed, and panic'd. Covering backsides. Something might happen! - Then DO something! And 'something' has been done.
It's the way of our present world.

Needless to say, no-one is going to say: It will be fine, just take it along to your nearest Citroen outlet - (hence the DO NOT DRIVE notice) - because then they will...
Replies: 34
Views: 213576

Last post by Stonehopper
23 Oct 2026, 07:21
PSA Electrical Diagrams - Wiring & Symbols Codes Index

by GiveMeABreak » 09 Dec 2023, 17:48 » in Diagnostics

PSA Electrical Diagrams - Wiring & Symbols Codes Index

The following will cover most basic equipment, but will exclude later systems & Tech.

PSA Electrical Diagrams Introduction - Function and Constitution of Codes
PSA Electrical Diagrams - Coding of Functions
PSA Electrical Diagrams - Component Coding
PSA Electrical Diagrams -...

Replies: 0
Views: 179191

Last post by GiveMeABreak
09 Dec 2023, 17:48
Citroen, DS Automobiles and Peugeot Official Part Number Requests

by GiveMeABreak » 15 May 2021, 13:55 » in Citroën
1

…

202

203

204

205

206
First post

Parts Service Announcement - 21st March 2025

Please note that there is a temporary disruption to our 'Parts Service', so we will be unable to provide any official parts for members at the present time. Please refer to the Post HERE for further info

Last post

Disruption to Parts Service

As you may be aware, the consolidation of the old PSA to the Stellantis Group systems has resulted in both a merge of data tools and a requirement to migrate PSA accounts to Stellantis Systems.

This has caused some problems for organisations like ours and the Team are currently looking at the best way forward. This...
Replies: 3080
Views: 1334846

Last post by GiveMeABreak
21 Mar 2025, 10:53
Airbag, Dashboard, Seat Belt & Airbag ECU Repairs

by GiveMeABreak » 24 Jun 2020, 17:01 » in Useful links
1

2

3

4

5

6
First post

Just for members to be aware that airbagteam.com based in the UK are offering a 10% discount to FCF members on any of their services.

The FCF does not endorse any company directly, but thought this would be of use to members.

Full details of their services and the discount can be found here:

Airbag, Dashboard, Seat Belt & Airbag ECU Repairs

Last post

I I gorgot
The car is a citroeng C2 1,6L VTS 2005
Replies: 80
Views: 668646

Last post by FinnCitro
14 Sep 2026, 17:59
New PSA Heritage Parts for Classic Cars

by GiveMeABreak » 11 Oct 2019, 16:18 » in Citroën

First post

Parts for Classic / Older Citroen, Peugeot Renault Vehicles

This may be of interest to Members with older vehicles where getting parts is a struggle and for those not already aware of the site.

PSA are embarking on a project to provide some supplies of original and re manufactured parts for older vehicles and classics, and have made it a...

Last post

anti-virus is blocking.......

Replies: 7
Views: 182515

Last post by Stickyfinger
16 Sep 2024, 21:28
Revised Easydiagnostics Discount Procedure

by GiveMeABreak » 03 May 2018, 17:22 » in Forum News, Announcements and Issues

Please note that there is a new procedure in place for members wishing to take advantage of a 15% discount off products from Easydiagnostics.

The old discount code that was entered into the checkout is no longer valid, as a result of the code being propagated over the Internet.

After discussions with Jim from ED today, we have agreed a new...

Replies: 0
Views: 148233

Last post by GiveMeABreak
03 May 2018, 17:22

Topics

Statistics

Last post

2002 Pug 406 2.0HDI Water Temperature Sensor

by johnway » 05 May 2015, 19:48

First post

Hi everyone,
Need to locate this sensor for replacement but can't see it - help please. Haynes does say that I may have to remove a few bits to get to it but it would be a great help and possibly save a great deal of work if I knew where it was in the first place !!
Many thanks,
John. :?

Last post

Found it !! Many thanks, John.

Replies: 3
Views: 476

Last post by johnway
06 May 2015, 12:51
307 HDI 1.6 EEEK!

by Stewart(oily) » 05 May 2015, 14:34

First post

I have been tasked with making my BILs 307 HDI run again, my cheapo code reader gives me 1351 and 1445 which relate to glow plugs and Eolys overflowing ??? It just sort of stalled ! and will not start at all, I cleaned a lot of contacts replaced the fuel filter and it ran last week, but then stopped again, the electrics also appear to be pi55ing...

Last post

Start at the beginning.
Look at live data, it can be viewed on most eobd readers. In live data check the rpm while cranking. If rpm stays at zero check out the crankshaft sensor. A faulty cam sensor can prevent the engine from starting but does not usually cause it to stop once it is running.
The other thing to check in live data is the rail...

Replies: 3
Views: 470

Last post by BX
05 May 2015, 20:32
2.0 110bhp HDI Acceleration

by johnway » 16 Apr 2015, 09:31

First post

Hello everyone,
My 2002 Citroen C5 always had more oomph than my 2003 Pug 406 yet they both have the same DW10 engine (no particulate filter). The Pug starts and runs OK but when I put my gogo foot to the floor (especially in 3rd gear) there is no immediate response - revs stay the same as does the speed, then after maybe 10 seconds or so -...

Last post

Great, good you got the real one as well....enjoy your mobile road block :)

Replies: 11
Views: 908

Last post by Stickyfinger
05 May 2015, 20:11
engine oil sump pan replacement

by creon » 03 May 2015, 13:16

First post

i have now tracked down an oil leak in the dw8 from the cam cove/box which is fixed to the sump pan, which has a pinhole and is losing a fair amount of oil.

my problem is sourcing the sump pan and gaskets, could someone advise from which other models would the sump pan fit my 306 dw8 without a/c and what difference is there between the lot - xud,...

Last post

From memory generally the steel pressed sumps are fitted to models without AC and the alloy sumps* fitted to those with AC, although the results can vary a bit.

*Some of the alloy ones have surprisingly fragile sump threads too, not many thankfully. :oops:

7 - CYLINDER HEAD ASSEMBLY

(e) Identification area .

(4) Upper cylinder head cover...

Replies: 2
Views: 902

Last post by spider
03 May 2015, 23:39
306 d turbo

by TC78 » 02 May 2015, 15:11

First post

Hello everyone,

I have a 1996 306 d turbo which I have owned for 12 years. Could any one please tell me the name of the hose that goes from the lucas fuel pump to the intercooler. Mine has a split in it leaving the car seriously down on power.

Thanks...

Last post

as long as the hose is airtight and not too small in diameter, or too soft that it flexes, then it shouldn't be an issue. i'll get a part number for one though if you want?

1574C4 seems to be the one for both bosch and lucas pumps, as well as a few other uses :shock:

Replies: 4
Views: 484

Last post by chinkostu
03 May 2015, 22:33
Peugeot 205 coil spring restraining cables

by Cornishcitroen » 26 Apr 2015, 21:06

First post

In my haynes manual there is a picture of some restraining cables that keep the front coil springs compressed once the wheel's been jacked up. I reckon I would find these very useful and that they would fit my Citroen c15D van as well.

Anyone ever used them or know how to get some?

Last post

These are really useful for the 206 as the springs extend further than the bottom arm can move!

Didn't realise it was an issue even earlier!

Replies: 6
Views: 771

Last post by chinkostu
03 May 2015, 17:33
Peugeot 207 Rip Off

by Pesto » 30 Apr 2015, 21:13

First post

Can anyone help me?

I have a Peugeot 207, 2007 Diesel model which won’t start. I put it into the garage 3 weeks ago as it wouldn’t start and they replaced the starter and a leaking coolant hose. The garage has replaced the starter which was apparently burn out but now the car won’t ignite. Originally the car wouldn’t turn-over but could be bump...

Last post

You took your car to the garage to have a fault fixed.They have worked on (fu***** up) your car,given you a bill for £450 and told you to tow it away to have it fixed by someone else. :rofl2: :rofl2: I just can not believe a garage would do that !!! What a bunch of plonkers.
This sounds like either total incompetence or very poor...

Replies: 7
Views: 778

Last post by Oldpug
01 May 2015, 16:53
Diagbox 7.38 by scary can't read any ECU

by WRC-RUSH » 01 May 2015, 12:59

First post

Hi guys,

I've tried forever getting this to work with no success :cry:
first with W7 and I even bought an XP laptop especially for it now, fresh install still c :cry: not read any ecu.
I installed the Diagbox and updated it to 7.38 according to the video and pdf instructions provided with it.
There are no further instructions with it for...

Last post

Yep, where where as it purchased/who from?

Also where are you? There may be a FCF member near you with a known working diagbox setup that can confirm if it's your car that's being awkward, or the diagbox kit you have is u/s.

Replies: 2
Views: 1248

Last post by wurlycorner
01 May 2015, 13:42
1.9 d 206 Rev Counter and AC Problem

by Edhertz » 13 Apr 2015, 18:37

First post

Hi,
Just wondering if there is someone out there who has had experience of what is going on with my Pug. For some time now the rev counter has not functioned nor has the ac. I noticed the rev counter sometimes kicks in during spells of wet weather and not during dry weather. I have also discovered that the ac works when the rev counter is on...

Last post

Thanks to everyone who replied to my question. I've worked my way round the list of things to try but alas the problem is still with me. I'll crack this one eventually and hopefully soon,
Alan

Replies: 4
Views: 784

Last post by Edhertz
30 Apr 2015, 23:51
407 Key fob 2005 + turning back miles.

by Peugeot_Russ » 28 Apr 2015, 15:11

First post

Hello all, so my key fob is looking quite tatty, it sticks when folding out, the rubber buttons are creased as well. I was wondering if there are any specialty companies in the UK who can supply a fresh key fob housing and key. is there some way to cut the blade, like a code or such? the dealership here is at a loss for a key, claiming they'll...

Last post

Ok...well this answers my question. the audacity of companies to make this product!! Mileage correction tool. works like an OBD scanner except its for miles

Replies: 6
Views: 786

Last post by Peugeot_Russ
28 Apr 2015, 20:50
pug 806 2.0 hdi turbo

by m300td » 22 Apr 2015, 14:56

First post

Hi could any one help
How easy it it to change the turbo om a 806 2.0 hdi
Do you have to take the sub frame off ?
Will other pug models fit ?
Mine failed drastically yesterday
I think the final tale tale signs were when it did a impression of a steam train thick white oily smoke for a quaters of a mile behind !!!!!
And black runny oil coming out...

Last post

when ours went on the 806 1.9tdi, we were fortunate to get one off a Xantia 1.9tdi but the 2.0hdi is different beast, dont know if yours is a 90 or 110BHP but i believe the 406 has the same engine plumbed in . if you get the part number for or off your turbo i'll match it against the one put on my old 406 2.0 hdi

Garry

Replies: 1
Views: 419

Last post by avamotor
27 Apr 2015, 20:27
Peugeot 307 1.6 HDI P0100

by ls52 » 07 Apr 2015, 18:48

First post

Hi All,

I wondered if someone could help. I got the code P0100 come up on my car followed by sluggishness and hesitation. So i checked the loom to the MAF which seems and then changed the MAF to a known working one, reset ECU and this has come back. I do have a reduction in MPG and it smokes If that makes any difference?

Last post

I don't have PP to get the live data. Although after a check over when the turbo kicks in there's whiffs of smoke coming from the engine bay which I would assume means a split pipe?

Replies: 2
Views: 1609

Last post by ls52
25 Apr 2015, 14:34
Rear brake lights staying on

by Welshy_Pete » 18 Mar 2015, 15:37

First post

My rear brake lights on my other 306 hdi are staying on when the ignition turned to the turn before starting. Also when the car started the lights also stay on the rear window light and 2 back lights stay on also.

There a click from the starter motor also as well.

Last post

Switches are under a fiver from Eurocar parts , but seen plenty of switches fail.

from that bunch that's all you can/should expect!!!!! :evil:

Replies: 11
Views: 3970

Last post by citronut
23 Apr 2015, 08:53
206 SW TU3JP 1st run up, No warning lights - really?

by mpdevice » 20 Apr 2015, 22:42

First post

Hi
Just finished a head gasket and head reconditioning job without having a garage - fully dependent on the weather. Thanks for some great weather in the last weeks. Have put the pieces of the puzzle back together and turned that key for the first time. Always a dodgy feeling... will it disintegrate? Smoke, stutter....?
All well - so far it...

Last post

OK will do this when I have some time and light (and the engine is cold)...

Thank you!

Replies: 6
Views: 692

Last post by mpdevice
22 Apr 2015, 21:20
peugeot 806 hdi fuel gauge

by m300td » 13 Apr 2015, 21:31

First post

hi could any one help traveling home tonight i noticed that my fuel gauge had gone to full and stops there does drop to empty put as soon as you turn ing on goes stright to full temp gauge is normal has anyone had similar faul dont fancy taking the tank off again to get the sender unit out a few months ago i changed the thing!!
malc

Last post

*******FIXED******** had to bite the bullet and remove the tank and sender again
what had happened is the plastic baffle had come unclipped from the bracket that secures it to the tank and with it floating around in the tank managed to hit the float arm and dislodge the float arm from the sender unit when it happened it managed to do it in the...

Replies: 3
Views: 973

Last post by m300td
21 Apr 2015, 23:20
Peugeot 206 1.1 Fuel Filter Change

by ecohouse1 » 21 Apr 2015, 11:35

First post

Silly question this, but I thought changing the Fuel filter on the Peugeot would be a 2 min job but I just couldn't get the clip on pipes to come off the old filter under the car. Maybe my fingers are too sausage like but the clips would not go in enough to release from the ends! Scared of breaking the pipes if I am too heavy handed so gave up!...

Last post

Slightly surprised you have one as some later models did without. :)

The 'quick release' clips there is a proper tool however all I *ever* used for these were flat type pliers:

Image borrowed from wikipedia. :)

Note: I have a snapon pair of these and a 'cheapo' bargain one, the 'bargain' one is small enough to press the 'buttons' on the fuel...

Replies: 1
Views: 2329

Last post by spider
21 Apr 2015, 17:17
Pug 206 1.1 Questions/Advice

by ecohouse1 » 20 Apr 2015, 16:54

First post

Hi Folks

Couple of questions relating to the little Pug 206 1.1 I bought for my daughter. Its a 51 reg Y plate, 63k miles. Base model - no frills. Its just had £450 spent on new exhaust, brake pads, front suspension arms, strut top bearings, tyres and came with a years MOT. Have so far been underneath and rust proofed what was looking like it...

Last post

You're welcome.

Compared to the BE3 units (for the XUD etc) the smaller box's the MA units do feel a bit notchy yes. Is there too much play in it ?

A common but often overlooked cause of play is the two tiny bushes fitted into the base of the gearlever, I recall on mine I changed the linkages (they were worn to be fair) but it was still sloppy...

Replies: 3
Views: 446

Last post by spider
21 Apr 2015, 17:08
307 anti pollution error faults 1.4 hdi

by avamotor » 18 Apr 2015, 16:25

First post

Please can anyone advise me on what to look for with regards to rectifying 3 error codes found on Planet Peugeot 2000, codes as per below:-

Permanent fault, diesel pressure signal, short circuit to positive or circuit open
ECU fault code P1614
Engine speed 0 rpm
Battery voltage 11 volts
Coolant temperature 13 deg. C
ECU internal data 00
Engine...

Last post

That battery voltage of 11v would concern me. Is this after repeated starting?

Replies: 2
Views: 1544

Last post by Gibbo_Wirral
20 Apr 2015, 13:30
V6 405/6Coupe---- Degass Pot

by Stickyfinger » 13 Apr 2015, 20:50

Wonder if anyone. has anyone got or can ask on the other Pug forums ? I need one for my V6 Activa

Replies: 0
Views: 346

Last post by Stickyfinger
13 Apr 2015, 20:50
Central lock Peugeot 406 2.0 HDI year 2001

by Peter from Denmark » 31 Mar 2015, 09:19
1

2
First post

Hi
Can anyone tell me if the control unit for the central lock system is integrated in the BSI unit on my Peugeot 406 facelift (sedan) from 2001?

Thanks

Peter

Last post

maybe the micro switch's on your plip circuit board are sticking so causing the battery to run flat

Also a possibility... thanks :-)
Replies: 16
Views: 2441

Last post by Peter from Denmark
13 Apr 2015, 13:20
406 trip computer help !!

by leeroy99 » 25 Mar 2015, 18:44

First post

hi all,
been buying a peugot 406 2.0 hdi 110 glx estate.its on a 03 & only got 100k on the clock,
been very well looked after and really clean,really happy with it &B drives mint =D>
the only problem ive got is the trip computer,its in km instead of mpg??
ive looked in manual & says button 1 & 3 beside trip computer but hasn't got any buttons?
any...

Last post

Well done.

Replies: 8
Views: 858

Last post by Peter.N.
11 Apr 2015, 23:37
307 1.4hdi Airbag and abs error message

by avamotor » 09 Apr 2015, 09:47

First post

Hello FCF,

It has been a while since i've have been stuck, but i was recently gifted with a Peugeot 307 1.4 hdi 2002 (i think gifted was the right word :?), However it was towed to me as a non runner. Cut a long story short the car had been severly abused by previous people (cant call them mechaincs or fitters) with some appalling sights.

I have...

Last post

Its got me bewildered currently, also happy to email you a copy of the disco lights sequence that are the leds flashing underneath the electric widow switches!!.

The contacts were the first thing under scrutiny before trying to determine live and ground points to switches etc and all is good order between the door connectors and the door/car...

Replies: 9
Views: 1859

Last post by avamotor
11 Apr 2015, 18:20
Central locking

by paul whalley » 10 Apr 2015, 16:13

Hello it's been awhile
Problem is on my peugeot boxer 54 reg it all started around 2 months ago, I locked the van up using the fob then came back to it and had to use the key then I noticed that the electric windows weren't working so I went through the fuse boxes and foun a fuse popped changed it and been fine till Monday, same happend again so...

Replies: 0
Views: 411

Last post by paul whalley
10 Apr 2015, 16:13
P reg 106 saved from the scrappy

by MikeT » 07 Apr 2015, 18:05

First post

Helping neighbour get his car back on the road after many, many years of neglect (he'd given up hope of DIY repair). After gentle encouragement and advise, he bravely bought all the parts in and we waited for warmer weather. She's all but ready for presenting to the MOT though I'm not 100% confident there's not a problem with the coolant system...

Last post

Theres another on the thermostat housing too, allen key shaped aswell as on top of the radiator (same style as the drain screw). The best way is to cut the bottom off a 2 litre pop bottle and stick it into the rad, then keep the level high whilst opening the bleed screws and you possibly get bubbles out of the top too.

As far as hubnuts go, swap...

Replies: 8
Views: 682

Last post by MikeT
09 Apr 2015, 17:38
307 woes

by orinoco74 » 27 Mar 2015, 20:12

First post

well I just bought a 307 (silly me) its the 2 litre petrol GLX model. When I got it, it had an aftermarket stereo in, so I figured that's why the clock display in the middle of the dash that displays the clock and temperature and date etc was not working. I figured it needed the stock stereo to work. So today I got looking at it and the thing was...

Last post

Post the last 8 digits of your VIN and it can be checked on Servicebox.

Replies: 11
Views: 915

Last post by Gibbo_Wirral
07 Apr 2015, 13:03
Is this a wiring loom problem (206 1.4i 8v petrol)

by mark21td » 05 Apr 2015, 18:06

First post

Not been on for a while but need some help.
My daughters W plate 206 1.4 8v petrol is playing up, at first it was stalling on overrun, I took the ICV out, cleaned it and all was well.
Today it's been revving to 2k all the time, I checked the ICV (swapped for a known good one), the revving stopped but it was back to stalling and was missing until...

Last post

I'm trying to get the codes read, but on a bank holiday weekend I coming with blanks.
Plus as it's running ok at present my daughter isn't keen on spending money :roll:

Replies: 2
Views: 588

Last post by mark21td
06 Apr 2015, 20:40
peugeot 806 turbo

by m300td » 02 Apr 2015, 00:39

First post

hi if anyone could help me
I have a very battered 806 2,0 hdi gtx (but would not change it!!)
over the last few months the turbo seems to be getting louder
I think I need to change it could anyone tell me if this turbo is the same as fitted to other Peugeot/citroen models
and how easy is it to change
many thanks
malc

Last post

Head gasket

Replies: 3
Views: 609

Last post by RichardW
05 Apr 2015, 10:49
pug 307

by m300td » 02 Apr 2015, 00:54

First post

could any one help with a friends 1.6 petrol 307
he recently brought the car with the fault it appears like a worn wheel bearing on the passenger side of the car
on start off it appears like a vibration then a humming noise up to about 50 mph above this it seems to disappear also when you turn the steering to the right it will disappear steering...

Last post

many thanks for the replys the gearbox oil level is ok will try the track rod end /tire route first
many thanks for the replys

Replies: 3
Views: 461

Last post by m300td
05 Apr 2015, 00:18
1.4 hdi turbo solenoid.

by rubenatk » 02 Apr 2015, 18:25

First post

New to the forum, my 1.4 hdi 208 came up about 2000 miles ago with a few fault codes for low turbo pressure and p codes suggesting it was the turbo solenoid. The waste gate actuator goes crazy Which is usually solenoid. I read the fault codes on diagbox and printing them off as I thought that would be ok, but apparently the code needs to be on to...

Last post

Hi Richard, slight loss in power and slight from in mpg as the turbo doesn't fully boost which I think is the cause of slight lack in power.

Replies: 2
Views: 1165

Last post by rubenatk
03 Apr 2015, 02:35
206 display.

by daviemck2006 » 01 Apr 2015, 22:23

First post

Does anyone know how you get the top display out to replace the bulbs in it?

Sent from my GT-I9300 using Tapatalk

Last post

Yes the later one then. The early ones were just a clock in the middle of it and nothing else (the cover on those popped off a bit easier)

Replies: 3
Views: 368

Last post by spider
02 Apr 2015, 10:50
Which version Diagbox

by FourOaksMan » 31 Mar 2015, 15:56

First post

Does anyone know which version of Diagbox suits a 508? I have been looking online and some claim to suit the 508 although the 5008 is listed but their screen shots show no mention of the 508 and some do not list it. Do not want to waste money on a piece of software to be of no use.

Last post

Diagbox 7 with Rev C cable is your best bet.

Replies: 1
Views: 375

Last post by Gibbo_Wirral
01 Apr 2015, 12:33
Peugeot Gearbox's

by madinfo » 30 Mar 2015, 10:51

First post

Hi, currently i am changing my car engine to a XUD one (can be searched in this forum).
And i am planning to change my gearbox, to a new gearbox (longer than the original dw8 one).

Information for the DW8 one is the following:

TRANSMISSION BVM5
GEARBOX (CHARACTERISTICS) GEARBOX BE4 N
FINAL DRIVE RATIO REAR AXLE HYPOID GEARSET 19 X 72...

Last post

By 'final drive' it means the differential ratio. :)

Replies: 6
Views: 3578

Last post by spider
01 Apr 2015, 09:18
Peugeot 106. 1999 1.1 Zest - FUEL Gauge not working

by Gregg1100 » 23 Mar 2014, 22:55
1

2
First post

Fuel gauge not working on above car. I removed plug on top of sender unit on fuel tank and no voltage registered on my meter. I then put a test light to it and no light up. Fuses are ok.
Could be the actual gauge of course. BOL not too helpful- surprise.
Any ideas please??
Thanks
Greg

Last post

Same saga- months in passing
Once again , checked all fuses, examined all the wiring loom covers for signs of rubbing against metal and shorting out- nothing.
There are some heavy white wires and another colour going to like a connector bolted to just under steering column--they look as if they could contain a fuse, but can't get them apart.
There...
Replies: 24
Views: 7709

Last post by Gregg1100
01 Apr 2015, 00:17
206 1.4 SW Head gasket change, exhaust and crankshaft hiccup

by mpdevice » 28 Mar 2015, 16:42

First post

Hi

Trying to dodge the rain and drizzle I started taking my 206 apart today. Wonder if you can give me any advice. SO far made good progress in the destructive phase of the job however I have two questions you may be able to answer.

I got most everything removed apart from the exhaust (manifold). I got all the nuts removed, most came out with...

Last post

It is about where item 6 is.

Replies: 5
Views: 1461

Last post by spider
29 Mar 2015, 22:15
1.6 HDi temp gauge moving?

by Mdon » 25 Mar 2015, 12:45

First post

Hi, the temp gauge on my 1.6 HDi 3008 moves up to 90 degrees once te car has warmed up for about 5 mins but then it keeps moving between 70 and 90. Is this normal or is it a fault with the temp sensor/sender?

Cheers.

Mdon.

Last post

Thanks for the replies, Richard is correct. I also asked the question on the peugeot forum and other 3008 owners have the same thing and one user read the ECU and the movement of 90 to the next mark down is only a couple of degrees and apparently it's normal. I'll keep an eye on it and if it proves to be an issue I'll take it back to the dealer as...

Replies: 6
Views: 4504

Last post by Mdon
27 Mar 2015, 23:30
206 1.9D (DW8) swap to XUD9TE (DHX)

by madinfo » 15 Oct 2014, 14:52
1

2
First post

Hi, 1st of all, my native language is not english, so i apologize if i make any mistakes.

I found this forum and i realize that lots of people here understand a lot of the old engines.
So, lets start :)

I have a 206 1.9D DW8 the one with no ECU on it, recently after 360k km's head gasket just said it had enough.
a friend of mine had 406 1.9TD...

Last post

Ok so HDI flywheel it is.

Anyway there are 3 kinds of turbos to these engines.

KKK and 2 garret.
i don't like the KKK ones.

So:
Garrett T2 and T15.

Witch one is the best ?
Or the differences between them ?

tanks

Pics soon
Replies: 27
Views: 8681

Last post by madinfo
27 Mar 2015, 11:08
2007 207 1.4 hdi occasional misfire

by chrisf1 » 25 Mar 2015, 13:02

First post

Hi everyone i have a recurring problem with my wifes 2007 207 1.4 hdi most of the time it runs perfectly but occasionally it develops a misfire and cuts out we have had the codes read and the mechanic reported nothing untoward showing, the car will be driving normally and then a complete loss of power but will start again straight away then if it...

Last post

I believe it was snap on

Replies: 3
Views: 835

Last post by chrisf1
25 Mar 2015, 19:09
Diagbox v7.01 to v7.02 upgrade

by melmos » 22 Mar 2015, 23:08

First post

Hi, after three days of trying I finally got v7.01 loaded, but when I restart Diagbox, the upgrade to v7.02 fails. Does anyone have any ideas on this?

Last post

You really need to be starting with Diagbox 7.02

Replies: 1
Views: 1152

Last post by Gibbo_Wirral
23 Mar 2015, 13:27
Peugeot 206 buying advice

by ecohouse1 » 21 Mar 2015, 13:50

First post

Hi folks. I am often on the citroen part of FCF but new to Peugeot! I am looking at 206s for my daughters first car. Looked at 2 today. First was a pretty thrashed 1.4 quicksilver. Left that well alone. Just looked at a 5 door 1.4s 2004. 89k miles. Generally looked nice bar a bit of cosmetic rust on the rear wheel arch. Main concerns were that...

Last post

Thanks Chaps. Good advice - I had already decided to avoid those 2! Will keep looking. Now widening the search for C2/C3, saxo. Its trying to avoid the boy racer brigade that is the issue! Cheers, Alan

Replies: 6
Views: 1122

Last post by ecohouse1
23 Mar 2015, 13:15
307 hdi 136 recurring P2122 intake air heating solenoid

by tmead » 07 Jun 2014, 13:22

First post

The car is a 307SW hdi 136, engine code RHR, on an 05 plate

This seems to be an intermittent fault, but has happened several times recently. It pops up an antipollution message, but reports on planet as P2122 permenant fault: intake air heating solenoid short to earth

Googleing reported a couple of pages where there is supposed to be a 'heater...

Last post

Well, just maybe this is fixed ! There are two vacuum solenoids that live on a bracket above the starter, related to the 'air doser' that allows bypass of the intercooler (intake air heater ?) and these were held in place with a mess of tie-wraps when i got the car. The solenoids both measure fine for resistance with a meter, and the connectors...

Replies: 3
Views: 1593

Last post by tmead
23 Mar 2015, 12:12
Auto box problem

by bangerdemon » 22 Mar 2015, 14:14

First post

Hi,

I hope someone can help.

We have a 2006 2.0HDi 807 (63000 miles), with the BVA-AL4 AT8 auto box. On Thursday, my wife was doing the school run, and She had faults show up on the OBC saying GEARBOX FAULT and then SPEED CONTROL SYSTEM FAULTY , and before she could stop, she lost all gears.

She was recovered by the RAC, who did a diagnostic...

Last post

It may be time to renew the pressure regulation solenoid, this is usually done in concert with the torque converter lock up solenoid as they are of the same type and beside each other.

Replies: 1
Views: 1079

Last post by addo
23 Mar 2015, 08:35
406 D9 Petrol Hydraulic valve

by toh » 13 Feb 2015, 09:12

First post

Hello every one,

I got 406 D9 version 2003 Petrol engine,

Now, I think there must be something wrong with the Main pressure Modulation Electrovalve and Convertoer pressure Modultion Electrovalve, referring to PP2000 diag software and
data surfing on the internet. My PUG got the same behaviors as they said.

My question is ...as the following...

Last post

Hello,

Is someone know about this? or it was very simple question.??!!!

Replies: 4
Views: 2177

Last post by toh
19 Mar 2015, 05:58
05 1.6 HDI 307 rad fan and now flat battery

by citronut » 09 Feb 2015, 20:11

First post

my friends 307 as above
the rad fan sometimes runs for quite some time after the engine is switched off, even if the engine is virtually stone cold,

then sometimes the fan does not do this for months, then all of a sudden it starts doing it again,

i do know the wires at the aircon pump are broken, but i would have thought if this had any bearing...

Last post

just had this heap in to have another look at it, as it is flattening the battery again,

it is now smoking a lot from the exhaust no metter what revs you have on,

i held it at 3.5K RPM in the yard, and the engine suddenly tried running away with its self ( 4.5K RPM ) and climbing, switched it off quick and it petered out after a few seconds,

so...

Replies: 7
Views: 603

Last post by citronut
18 Mar 2015, 13:53
1.6hdi dv6 turbo solenoid valve diagram or photo needed

by scirocc0 » 18 Mar 2015, 13:52

recently my 407 1.6hdi has lost boost , i think it could be because i fiddled with the pipes on the solenoid valve ,
i saw a loose pipe near it so i reconnected it but im unsure if its even for the solenoid ,as it boosted fine before i connected it ,

im looking for a diagram or a photo of a turbo solenoid valve so i can see what ive done wrong...

Replies: 0
Views: 677

Last post by scirocc0
18 Mar 2015, 13:52
Ignition Key stuck in barrel 406 Executive

by jonnya » 24 Feb 2015, 17:04

First post

Hello All,

I now have an 406 1.9 Exectutive 98 X reg. The ignition key is stuck in the lock barrel with the ignition switched on (battery now disconnected) I had to stall car to stop engine. The key will not twist and release from the lock. What options/methods do I have to get the key out. Can I release the key without having to get a new lock?...

Last post

I would urge you to take it to a GOOD locksmith or find one on the internet whose specialism is Automotive locks..most larger cities have one or two very good ones.
The parts alone could cost you more than their charge....ask at a expensive 2nd hand quality car dealer who they would use.

Replies: 11
Views: 1522

Last post by Stickyfinger
17 Mar 2015, 20:01
205 gti engine.

by daviemck2006 » 14 Mar 2015, 19:11

First post

Does anyone know if an engine from a Pug 309 1.9 gti will work on the 205 1.6 gti gearbox? I'm being offered, from the same person either a 205 1.6 gti engine and box with a recent clutch from a rear damaged car or a 309 1.9 gti engine only from a mot failure, box has already been sold. The 1.9 is considerably cheaper and if it will work in our...

Last post

Thanks guys. We have decided to keep the car stock so going for the 1.6. Yes its more money, but with a recent clutch and box it should be worth it. That will leave us a spare gearbox which could be kept for spare or sold on. I would expect to change the cambelt and associated bits and it will be an easier straight out and in job, a day to get it...

Replies: 3
Views: 512

Last post by daviemck2006
15 Mar 2015, 19:00
306 hdi EML how to reset

by Welshy_Pete » 15 Mar 2015, 11:40

First post

I was having the anti role bar bushes changed. But while at the garage they checked why the EML engine management light was on and had the car connected up for free to find out what it was. The fault was the throttle position sensor you could hear the spring inside if you knock it. Also slight rough idle sometimes as well.

I have changed the part...

Last post

Diagnostics 101, always clear down faults after reading/noting them. Did the garage do this?

You might want to just ignore it for a week or so and see if the EML goes off eventually. This can happen automatically when such faults are cured. Otherwise, it's back to the diagnostics.

Replies: 1
Views: 441

Last post by MikeT
15 Mar 2015, 12:18
peugeot 307sw 1.6hdi dead !!!!!!!!

by mdl350 » 11 Mar 2015, 07:52

First post

I am hoping some one can help me I have a peugeot 307sw 1.6hdi 2004 we have just done a head gasket on but now will not start.
Before doing the head gasket could not get any communication with the car using three different diagnostic machines now
it won't start it says economy mode active on dash
heater controls windows and radio do not work...

Last post

hope you dont mind me offering your services Mr Mike [-o< [-o< :-D :wink:

Always happy to help others when I can. You're not volunteering me Malc, I did sign up to the lexia map.

Replies: 12
Views: 1376

Last post by MikeT
15 Mar 2015, 11:49
Open wiring loom socket

by ekaftan » 14 Mar 2015, 23:44

Hi,

I need to replace a pin in one of the BSI connectors on my 206. The connectors are your standard multipin grey/black/green socket connector with a red sliding locking tab.

I sent an hour trying to crack one open without breaking it and I was unable.

Whats the trick?

Thanks

Replies: 0
Views: 359

Last post by ekaftan
14 Mar 2015, 23:44
406 hdi aux belt - strange behaviour

by Peter.N. » 24 Feb 2015, 17:24

First post

I was just backing into a parking space outside the dentist this morning when I suddenly lost power steering and electricity, then it came back, then it went again, when I came out and drove home it had gone completely, I had a quick look under the bonnet and the aux belt appeared to be OK. I drove home carefully avoiding sharp corners, put the...

Last post

Thank you for your concern. Nothing has moved much in the 40 or so years I have used it, if its going to collapse I think it would do it when I drive on, the oil drums are remarkably strong, I have only replace them once since its been there, the others did start rusting out so I have put some oil inside these which has kept them fairly rust free...

Replies: 14
Views: 1119

Last post by Peter.N.
14 Mar 2015, 21:25

9378 topics

Page 94 of 188
- Jump to page:
Previous
1
…
92
93
94
95
96
…
188
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum