French Car Forum

Hi all, cryptic heading perhaps. Mine’s a Peugeot 307 2003 with a broken belt tensioner. Nfu engine 1.6 dohc 109 hp. I have made a replacement which functions without the original properties. I understand the tensioner, called 5706H1, is very uncommon. Neither breakers nor spare parts dealers have this particular type, but rather the automatic...

Quick question.

I don’t have access to the car just now to check this myself & wont get near it until the weekend.

Does anyone know what type of bolt head is used on the calliper securing bolts. Is it just standard hex, or something like Allen or Torx? I’m sorted if it’s hex or Allen, but not so with Torx as I only have a few sizes.

Need to...

Good morning,

I am new to this site and was hoping that I could find anyone with the diagbox to help figure out what's happening with my 308sw 2.0hdi 2016.

Sorry bare with me on this and I hope it makes sense. Note, I don't really have much experience with cars. But i will try until I cant

To start with before Christmas I had electrical fault...

Hi i bought 3008 15 days ago and the average L/100Km is 7.8 after 700kms. It’s 1.2 puretech 130 2021.
Belt changed all filters everything is sorted. 45k driven. 95% motorway drive.
Is it high or is it normal?
I’m in spain so max AC also.

Hi there I'm wondering if anyone can help me by sending the camshaft tappets removal procedure on the 5fw engine. I have attached a picture.
I need to replace the hydraulic lifters. Remove those springs etc.

Having issues with my 2012 3008 1.6 Hdi. Doesn't seem to want to regen. Usd car scanner but the soot and ash levels are not too reliable,as theash reading fluctuates. Used FAP lite as can't get the full version due to lack of developer support, FAP lite reports 675 ltr of eolys fluid in the tank but this amount hasnt dropped since we got the car a...

Peugeot 508 r8 1.6 puretech 180hp. I have an error that I don't think is from the throttle, I think it's from the map sensor but I don't know if it's the first or the 2nd, has anyone else had problems?

does anyone have more details about the error?

P306D-22 Coherence Between The Position Of The Motorized Throttle-Housing (Air Mixer) And The...

I've got an error code of U1134 coming up on my peugeot 2008 1.6 diesel (2013 year).

I've read that it may have something to do with the stop/start system on the car which hasn't been working for a while, because I assumed I haven't done any long journeys for a long time.

I have a very long journey in the next few days and need advice on whether...

Hi there.
I have a 308 2010 ep6 5fw with 80000 ks.
It has a cylinder 3 missfire that only happens when engine is hot.
I have done all obvious sparks plugs coils injectors. I had it diagnosed by Auto electrician and everything electrical seems good.
The issue has been narrowed down to mechanical.
Can anyone send me the intake camshaft procedure to...

I've had a number of electrical issues on my 2010 207 1.6 Vti Automatic recently. The main ones being an ABS, power steering and speedo issue which I traced to a burnt out fuse box at plug 28V MR

Fuse.jpg

I replaced the fuse box (same part number) and the 28V MR connector (soldered the wires) and this has solved the ABS issue however I now...

Hello to the forum, and thanks for a valuable source of info on the PSA cars.

I have a Peugeot 308 T9 year 2017. It has keyless entry, and remote unlock button on the keyfob.
I have installed an automated lift system on the tailgate. This can be operated by a positive or negative pulse.
However, since the doorlock are CAN controlled, I am...

Hi!
Which brand do you use for the fuel filter please. Original from Peugeot dealer is around £51. Anybody can recommend any shop online or ebay seller please. Thanks a lot.

Hi, Facing a problem with my Peugeot boxer currently where when it is cold there is a rattle, it comes from the top of the engine but seems to come from the whole top of the block. Once the engine is warm there is no rattle/very little rattle. First thoughts were timing chain, but if you read on you will see why with think this is not the case....

Just as the hot weather hit this week, the aircon on my 2012 Partner Outdoor (I pity everyone with the indoor edition) packed up. One day it was fine. The next, much hotter, day it wasn't.

I've just hooked up the Diagbox computer and am able to manually activate the compressor clutch. I also found out I can activate the aircon when the blower is...

I've recently bought a used Peugeot 2008 GT Line (2020) with a 1.5 diesel engine and ATN8 automatic transmission.
It's equipped with 12 parking sensors, blind spot monitoring, radar under the bumper, lane assistance, and safety brake, along with a camera for signs.
What my car missing is active cruise control, automatic parking, highway drive...

Hello,

I have got a Peugeot 406 2.1TD with the EPIC pump. It's recently started cutting out when up to temperature, particularly when returning to idle (e.g. at junctions). I'm suspecting it is something to do with the pump or pump electronics, but I was wondering if there is anything else to rule out.

I recently replaced the fuel pipe all the...

Hi all.

I had my AC system checked ( 5008 MK1 2.0 hdi 2011 )for leaks and the garage found out that the AC condenser has a hole and needs changing.
I have ordered a replacement NRF which should be here soon

Bumper has to come off without a doubt , but do I need to remove the cooling fan as well? Coolant Rad brackets?

Anyone has any advice or...

Hi everyone,

I need some advice regarding the Aisin AM6 (TF-80SC) 6-speed automatic transmission on my Peugeot 407 2.0 HDi. The car has covered 151,000 KM.

I recently changed the transmission fluid, but I am experiencing a severe shifting issue specifically between 3rd and 4th gear. When moving from 3rd to 4th, the gearbox completely loses drive...

¡Hello there!

It has been a year since I bought my wife a 207cc (1.6hdi from 2007) and since then we have
been unable to make it work fine. It has a low power condition that makes it impossible to
reach more than 60mph even full throttle in third gear... I have the same engine on a C4 and
I can confirm this one is completely off.

I have swapped...

Just fiited a new abs sensor ready for the CT this week and noticed some strange tyre wear. The tyres are dated 28th week of 2021 and the pressures are fine. They were tracked a couple of thousand miles ago and hardly moves. It's likely to do 300 miles in a day then sit for 2 months.
1781355226740.jpg
Right hand front cracking/splits on outside...

Hello.
Dear colleagues, for a Peugeot 5008, manufactured in 2010, 2.0 Hdi engine, engine code RHE, please tell me how the 4 injectors are numbered? Number 1 is at the gearbox and number 4 is at the timing, or number 1 is at the timing and number 4 is at the gearbox? I know that number 1 is at the gearbox and that's how I coded them with Diagbox,...

Hi there.

My alternator pulley flew off whilst driving yesterday! Only the hub remains (the part needing a special tool to remove). I want to order a replacement, but Autodoc lists several different sizes for my vehicle. I obviously can't check the existing pulley as it is no long present.

Is there a way forward? My VIN is VF3**************[VIN obfuscated, can be read by forum staff] and...

Hi,

New Peugeot owner, first time poster. Im changing the front left drive shaft on my Peugeot Expert and as such will be needing to refill the transmission fluid.

I assume most of the oil will drain out when i remove the drive shaft or will i actually need to drain the transmission fully from the plug?

If so then i wonder about the size of...

Ok everyone, we finally replaced our sadly crashed 2004 307SW with (wait for it) a gorgeous condition 2006 307SW! We get to keep the old one for parts and since they're both 1.6 TU5 petrol engines (my main selling point for buying the new one) we have lots of interchangeable bits. Here's to the next 20 years!

The guy who was selling it said the...

Hi lads,

I’m reaching out because I’m genuinely starting to believe my 508 Allure (2.0 HDi with the electric automatic handbrake) was built in a parallel universe. I’ve spent the entire day hunting, and it is absolutely impossible to find a replacement clutch master cylinder anywhere on this planet—aftermarket or genuine.

The physical part on my...

Hi
Got issues with boxer 2.2 puma engine 4hh with fuel vasporizer etc.
Cant find right diagram for this vehicle.
Need confirm wirnning connection underbonnet fusebox to -> ecu ( sid 208 ) as on fusebox on relay 6 has permament power feed on pin 87 ( with haynes this is power feed for vaporizer and same time signal to ecu on pin C26? )
need...

Is it possible to get information about the connections to the urea system, especially around the pump and nozzle? VIN: VF3**************[VIN obfuscated, can be read by forum staff]

Also, if possible: The car did not come with a rear camera, but I have an original one that I want to connect. I don't know if the connection for it is shown on this model. If it is, I would also be grateful...

Hello Everyone! Thank you for accepting me as a member! :)

First of all, I know that strictly speaking I am an outsider here, but I have an issue with a PSA group sister car, and thought that you kind folk could help me out.

My wife has a red '19 Grandland X and she asked me to retrofit electric folding mirrors to the car. I have already done...

Hi all,

i have a Peugeot 308cc 1.6 vti and had some error codes come out after a month since it was repaired.

They are P0948, P15A6, P11AA.

Many thanks.

Hi Everyone 🏁

Having run and tested various tyre setups on both a Citroën C4 (B7) MK2 and a 2012 Peugeot 3008 MK1 (which share similar PSA PF2 chassis geometry), I wanted to create a comprehensive resource regarding 16 inch tyre size upgrades. While the physical clearance boundaries listed here are specific to this platform, the core mechanical,...

With you. Diagbox won't connect to the seat. How do I turn on the seat heating? The seat mat doesn't heat, but the backrest does. Has anyone had this problem and knows where to look for the problem?

Good morning Everyone,

Please can you help me with my daughters 2014 Peugeot 208 1.2

I changed the lower wishbones yesterday and lost some gearbox oil, not a lot but I would like to drain and refill.

How do I do this?

I think I’ve found the drain, but how do I refill?

Also what oil do I need?

Hello,

I have a problem to get timing belt correctly assembled to my peugeot 308 T9 1.2l 96kw puretech. I have used locking pin, locking parts to camshafts. I started engine, I have a p0011 and p0014. When I record parameters, inlet camshaft has value 9, required 40 and exhaust has -15 required is -15. What has went wrong?

VTT wheel preparing...

9th of June 2025 a thud from 5 down to 3rd no clutch ....bye bye c3 picasso. So many hours of Internet searching and a numb brain and giving up a friend emails me and sends me a link for this little car , so off I went on Wednesday arrived at the garage at 4.30 had a look over the car plugged it into the diagnostic 3 codes ( which later turn out...

About to do the rubber band procedure on my 2011 508. It has the 9HR lump, a DV6C mated to the MCP box.

I took a quote for the parts at the dealers, but wasn't entirely impressed by the pricing. They did advice me though, that the crank pinion should be changed. I'm pretty sure the car has this done at a recall about ten years ago, but it's a 50€...

2009 207cc 1.6thp
Any hints on this one greatly appreciated, as this is currently kicking my arse!!
Little bit of history:
Car had a death rattle on startup, if left to warm up rattle went away. I suspected the hydraulic tensioner on it's way out. But seemed fine once warm, so she drove it locally while I got round to doing it. Next it wouldn't...

I have just rebuilt the engine on my 2019 2.0 Blue Boxer.

When I started the rebuild the engine did run but bottom end was shot.
Sice fitting the engine it wont start, it fires and will run for about 5 seconds then stalls, interstingly whilst it is running the throttle pedal has no effect on the revs.
I am using a Launch 129X diagnostic machine...

Hi dear forum members,

Does anyone have removal procedure for the sunroof on a Peugeot 5008 MK2?

I have rust building up under the paint nearly all the way along the gasket of the sunroof, so I need to get it removed so I can tackle the paint repair.

The procedure might be the same on a 3008 MK2.

If anyone has done anything similiar I would...

I am in the need of upgrading the alternator on my Peugeot 205 (TU3MC 1.4L) in order to have enough current to support two 100W rally lights as well as fans from a 205 diesel. Now I was looking into other cars with TU blocks that mightve come with a larger alternator but so far have not found anything that could easily be put on my engine. The...

Hi guys, ive had the check engine light come on my Peugeot Partner mk3 2019 1.6hdi, Ive had 2 mobile mechanics look at it with no joy, it seems it could be related to the stop start system, which is weird because its never actually worked before, but now i've got this problem, the stop\start has started working.
I am hoping someone has experienced...

OK, my recently bought 2021 Expert Van has a steering wheel that looks like it has been attacked by a rabid dog.
I bought a leather bound wheel from EBay and took van an wheel to my friendly mechanic.
He found the wheel and the van are incompatible. Obvious once pointed out the airbags are different shapes D'oh!
The fitted wheel is 98088708ZD I...

Hi all,

I have a 2010 308 cc 1.6 vti allure, and my driver side window is having issues. It has been broken for 2 years now and i havent been able to move it. At first the window started having issues winding up and down, at one point it only winded an inch up and down, then altogether stopped winding up at all. This of course resulted in the...

Good day everyone i have a Peugeot 508 1.6vti ep6c engine which is after my sanity i recently have this multiple codes, the car does not move at all when I start the car it doesn't rev pass 2000-300rpm and it doesn’t move at all despite flooring the accelerator
These are the codes it is showing
1.P101C Variable Valve Lift Relay Control...

Trying to identify this, it fits in the alloy housing pictured which is above the HP pump on the 1.5HDI where the fuel filter used to be sited..check valve? Been googling all afternoon.. #-o

20260528_114401.jpg 20260528_114401.jpg

Good day everon lately I have been getting oil pressure light on my dashboard I ran a diagnosis and I was hit multiple codes which one f them was oil pump solenoid valve which I tested the resistance with a multimeter and it was reading 20-30ohms which was very high I swapped it with a new one which it resistance was around 12ohms, then I tried to...

i have a 2008 Peugeot expert 2.0 hdi that wont start. code p1351, pre/post heating relay circuit. plugs never supplied and code p1350, pre/post heating relay circuit. open circuit or short circuit to earth. i have replaced the glow plugs, glow plug relay and put a new battery in and still wont start. also there is no power getting to the high...

Hello, could someone please help me get the build sheet/equipment list for a e-3008 VIN: vr3**************[VIN obfuscated, can be read by forum staff]**************[VIN obfuscated, can be read by forum staff]
This is a vehicle advertised since May 2024, with approximately 10,000 km, for sale at a dealership in Portugal and listed as imported from another country. Any relevant history information that could help before I decide to buy it would be...

I know this is a long drawn out post so TLDR : aircon made weird noise now cycles on and off on its own.

I wonder if anyone can point to what is going on here, I have a 2020 Peugeot Expert 2.0 HDI and at first the air con was absolutely fine, last winter the van started making a kind of hooting noise periodically, I traced it to when the AC was...

Hello does anyone know or has anyone come across this fault on an aisin am6 gearbox. The code comes on after 5 minutes of driving with an s and a snowflake flashing by the gear selection screen

Hi All,

I love driving my Peugeot 207cc (2007 model) with the roof down.
My roof always worked like a charm: no noises, quickly etc.)

Suddenly the following was the case:
I tried to open the roof:
Pressed switch down, windows lowered all four, roof procedure started as normal (boot lid opened, roof folded in).
After my roof was folded in, the...