Hey, I'm after the Injector clamp bolt torque setting for a C3 2011 1.4hdi Vin No: VF7**************[VIN obfuscated, can be read by forum staff].
I'm struggling to find the setting, hope some one can help.
thankyou
Injector Clamp Torque Setting
Moderator: RichardW
-
OnlineGiveMeABreak
- Forum Admin Team
- Posts: 37337
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5722
Re: Injector Clamp Torque Setting
Here you go:
| Reference | Designation | Stage | Tightening Torque |
| (1) | Connections (Diesel Injector) | Pre-Tighten | 2 Danm |
| (1) | " | Tightening | 2,5 Danm |
| (2) | Connections (Fuel High Pressure Pipes / Fuel High Pressure Common Injection Rail) | Pre-Tighten | 2 Danm |
| (2) | " | Tightening | 2,5 Danm |
| (3) | Union (High-Pressure Fuel Pipe / Fuel High Pressure Pump) | Pre-Tighten | 2 Danm |
| (3) | " | Tightening | 2,5 Danm |
| (4) | Bolts (Fuel High Pressure Pump Rear Bracket) | Tightening | 1 Danm |
| (5) | Bolts (Fuel High Pressure Pump Rear Bracket) | Tightening | 1 Danm |
| (6) | Bolts (Diesel Injector Fixing Flange) | Pre-Tighten | 0,7 Danm |
| (6) | " | Angular Tightening | 80° |
| (7) | Bolts (Fuel High Pressure Pump Front Bracket) | Tightening | 2 Danm |
| (8) | Bolts (Fuel Injection Pump / Bracket ) | Tightening | 2 Danm |
| (9) | Fuel Injection Pump Pulley Nut | Tightening | 5 Danm |
| (10) | Bolts (Fuel High Pressure Pump Rear Bracket) | Tightening | 2 Danm |
| (11) | Bolts (Fuel High Pressure Common Injection Rail / Engine Block) | Tightening | 2 Danm |
| (12) | Fuel High Pressure Sensor | Tightening | 4,5 Danm |
| (13) | Bolts (Fuel Pressure Regulator / Fuel High Pressure Pump) | Pre-Tighten | 0,3 Danm |
| (13) | " | Tightening | 0,7 Danm |
Please Don't PM Me For Technical Help
Marc
Marc
-
essa
- Posts: 18
- Joined: 08 Jul 2021, 08:49
- Location: Bradford
- My Cars: citroen c3 connxtion 2010 1.4hdi
Re: Injector Clamp Torque Setting
thankyou very much @GiveMeABreak, so I guess its number 6 I'm looking at for the clamp bolts what 0.7 danm in nm? is that 7nm?
Last edited by essa on 14 Jul 2021, 09:00, edited 1 time in total.
-
Steve Walsh
- Donor 2024
- Posts: 464
- Joined: 25 Oct 2019, 07:20
- Location: SW France
- My Cars: C5 Aircross 2021 VR7**************[VIN obfuscated, can be read by forum staff]**************[VIN obfuscated, can be read by forum staff]
Kawasaki ZR1100 1994
C4 Hatchback
Yamaha XVS650A 2001 - x 364
Re: Injector Clamp Torque Setting
7nm
5.6 ft/lb
61.9 in/lb
5.6 ft/lb
61.9 in/lb
Thanx to Marc and all the admins & knowledgeable people that make this the best forum on the interweb. 
-
essa
- Posts: 18
- Joined: 08 Jul 2021, 08:49
- Location: Bradford
- My Cars: citroen c3 connxtion 2010 1.4hdi
Re: Injector Clamp Torque Setting
7nm + 80 degree thankyou