part number information wanted
Moderator: RichardW
- Dormouse
- (Donor 2022)
- Posts: 2010
- Joined: 15 Apr 2021, 14:32
- Location: Kingdom of Fife
- My Cars: Peugeot 3008 Hybrid4, Fiat Ducato, Morris Mini.
plus notable cars I have owned :- Studebaker 1921, Daimler Consorts, Mercedes 220 Pontoon, Simca 1301, Austin Metropolitan, lots and lots of Minis, both steel and fibreglass bodied, Fiat 500F, Citroen GSA's, Skoda Estelle 120 Rally replica, DKW 1000S, Triumph Herald Estate, Warwick GT (very briefly) - x 666
part number information wanted
the following numbers appear on my 3008 Hybrid4 Controlled Air intake Module.
Can anyone shed any further light on it and find it in any parts list?
T84
96 726 968 80
>PP-GF30/SEBS <
RA-GI
Can anyone shed any further light on it and find it in any parts list?
T84
96 726 968 80
>PP-GF30/SEBS <
RA-GI
- Oldpug
- Posts: 481
- Joined: 07 Aug 2010, 11:15
- Location: Berkshire
- My Cars: Peugeot 406 GLX
Audi A3 TFSI S Line
Mercedes SL320
(In the past,just about every old Peugeot you can think of.) - x 64
Re: part number information wanted
9672696880 is a Bosch part number.
- Dormouse
- (Donor 2022)
- Posts: 2010
- Joined: 15 Apr 2021, 14:32
- Location: Kingdom of Fife
- My Cars: Peugeot 3008 Hybrid4, Fiat Ducato, Morris Mini.
plus notable cars I have owned :- Studebaker 1921, Daimler Consorts, Mercedes 220 Pontoon, Simca 1301, Austin Metropolitan, lots and lots of Minis, both steel and fibreglass bodied, Fiat 500F, Citroen GSA's, Skoda Estelle 120 Rally replica, DKW 1000S, Triumph Herald Estate, Warwick GT (very briefly) - x 666
Re: part number information wanted
do you know what for perchance? It makes sense as the actuator is also bosch
- Oldpug
- Posts: 481
- Joined: 07 Aug 2010, 11:15
- Location: Berkshire
- My Cars: Peugeot 406 GLX
Audi A3 TFSI S Line
Mercedes SL320
(In the past,just about every old Peugeot you can think of.) - x 64
Re: part number information wanted
It’s the Bosch number of a 3008 Intercooler air chamber guide. I have a feeling it’s not sold as a separate item.
- GiveMeABreak
- Forum Admin Team
- Posts: 37005
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5646
Re: part number information wanted
I'm having trouble identifying that from your picture as it is too close to put it in context with its surroundings, but these are the bumper assembly diagrams and the nearest thing I can locate to it is item (30) which is the Pilot Air Intake Module. There are several diagrams for your VIN depending on the build, so I've included both:
Hopefully you'll know which version you have from the other features of the body work / lighting as there are specific differences you can match up.
Mid Life | Except Mid Life |
Please Don't PM Me For Technical Help
Marc
Marc
- Dormouse
- (Donor 2022)
- Posts: 2010
- Joined: 15 Apr 2021, 14:32
- Location: Kingdom of Fife
- My Cars: Peugeot 3008 Hybrid4, Fiat Ducato, Morris Mini.
plus notable cars I have owned :- Studebaker 1921, Daimler Consorts, Mercedes 220 Pontoon, Simca 1301, Austin Metropolitan, lots and lots of Minis, both steel and fibreglass bodied, Fiat 500F, Citroen GSA's, Skoda Estelle 120 Rally replica, DKW 1000S, Triumph Herald Estate, Warwick GT (very briefly) - x 666
Re: part number information wanted
It is part 30 in the Except Mid Life picture
- GiveMeABreak
- Forum Admin Team
- Posts: 37005
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5646
Re: part number information wanted
Ok, then that is part: 1608950980 - sitting down? Price is £297.06 inc. VAT.
Please Don't PM Me For Technical Help
Marc
Marc
- Dormouse
- (Donor 2022)
- Posts: 2010
- Joined: 15 Apr 2021, 14:32
- Location: Kingdom of Fife
- My Cars: Peugeot 3008 Hybrid4, Fiat Ducato, Morris Mini.
plus notable cars I have owned :- Studebaker 1921, Daimler Consorts, Mercedes 220 Pontoon, Simca 1301, Austin Metropolitan, lots and lots of Minis, both steel and fibreglass bodied, Fiat 500F, Citroen GSA's, Skoda Estelle 120 Rally replica, DKW 1000S, Triumph Herald Estate, Warwick GT (very briefly) - x 666
Re: part number information wanted
I already know that -= I had to buy one! turns out the stepper motor actuator is replaceable and only costs £30-40 brand new. I bought a new old stock one for a tenner and have cleaned and rebuilt the old unit -= so if someone wants a bargain, anything over £30 might buy it. Otherwise it is a very expensive ornament. I have started a parallel thread playing Hunt The Other Cars With a Intercooler Air Control unit. There are quite a few so far. T9 version of 308 has one in the range. 507SW has one too. plus Fords, Volvos, Opels all list the stepper motor and or a Contollled Air unit.
- Dormouse
- (Donor 2022)
- Posts: 2010
- Joined: 15 Apr 2021, 14:32
- Location: Kingdom of Fife
- My Cars: Peugeot 3008 Hybrid4, Fiat Ducato, Morris Mini.
plus notable cars I have owned :- Studebaker 1921, Daimler Consorts, Mercedes 220 Pontoon, Simca 1301, Austin Metropolitan, lots and lots of Minis, both steel and fibreglass bodied, Fiat 500F, Citroen GSA's, Skoda Estelle 120 Rally replica, DKW 1000S, Triumph Herald Estate, Warwick GT (very briefly) - x 666
Re: part number information wanted
try part no
9673420580
it is associated with the Controlled Air Module no 30 apparently and it should hopefully be the stepper motor actuator
9673420580
it is associated with the Controlled Air Module no 30 apparently and it should hopefully be the stepper motor actuator
- GiveMeABreak
- Forum Admin Team
- Posts: 37005
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5646
Re: part number information wanted
PSA don't sell them separately - only the complete modules - I've just provided the OEM part number which you were missing.
Please Don't PM Me For Technical Help
Marc
Marc
- Dormouse
- (Donor 2022)
- Posts: 2010
- Joined: 15 Apr 2021, 14:32
- Location: Kingdom of Fife
- My Cars: Peugeot 3008 Hybrid4, Fiat Ducato, Morris Mini.
plus notable cars I have owned :- Studebaker 1921, Daimler Consorts, Mercedes 220 Pontoon, Simca 1301, Austin Metropolitan, lots and lots of Minis, both steel and fibreglass bodied, Fiat 500F, Citroen GSA's, Skoda Estelle 120 Rally replica, DKW 1000S, Triumph Herald Estate, Warwick GT (very briefly) - x 666
Re: part number information wanted
In that case, for anybody else reading this in the future, the stepper motor which was faullty and the Air Vane part which was perfect was repaired by buying the Sonceboz (Bosch) actuator separately from Ford. True cost £30-40. Mines cost £10 as a NOS part
Last edited by Dormouse on 16 Jun 2021, 20:44, edited 1 time in total.
- Dormouse
- (Donor 2022)
- Posts: 2010
- Joined: 15 Apr 2021, 14:32
- Location: Kingdom of Fife
- My Cars: Peugeot 3008 Hybrid4, Fiat Ducato, Morris Mini.
plus notable cars I have owned :- Studebaker 1921, Daimler Consorts, Mercedes 220 Pontoon, Simca 1301, Austin Metropolitan, lots and lots of Minis, both steel and fibreglass bodied, Fiat 500F, Citroen GSA's, Skoda Estelle 120 Rally replica, DKW 1000S, Triumph Herald Estate, Warwick GT (very briefly) - x 666
Re: part number information wanted
This is the original actuator and the identical but FoMoCo branded replacement
- Dormouse
- (Donor 2022)
- Posts: 2010
- Joined: 15 Apr 2021, 14:32
- Location: Kingdom of Fife
- My Cars: Peugeot 3008 Hybrid4, Fiat Ducato, Morris Mini.
plus notable cars I have owned :- Studebaker 1921, Daimler Consorts, Mercedes 220 Pontoon, Simca 1301, Austin Metropolitan, lots and lots of Minis, both steel and fibreglass bodied, Fiat 500F, Citroen GSA's, Skoda Estelle 120 Rally replica, DKW 1000S, Triumph Herald Estate, Warwick GT (very briefly) - x 666
Re: part number information wanted
The main vane module would be the part in an accident or pheasant strike that would get damaged but my actuator was damaged by salt spray from travelling behind an artic in late December last year. The 4 pin connector let in and held the spray water in the joint and caused all the issues. I had to replace the 4 pin plug as well which we got from the VW parts bin.
- Dormouse
- (Donor 2022)
- Posts: 2010
- Joined: 15 Apr 2021, 14:32
- Location: Kingdom of Fife
- My Cars: Peugeot 3008 Hybrid4, Fiat Ducato, Morris Mini.
plus notable cars I have owned :- Studebaker 1921, Daimler Consorts, Mercedes 220 Pontoon, Simca 1301, Austin Metropolitan, lots and lots of Minis, both steel and fibreglass bodied, Fiat 500F, Citroen GSA's, Skoda Estelle 120 Rally replica, DKW 1000S, Triumph Herald Estate, Warwick GT (very briefly) - x 666
Re: part number information wanted
Main Air Vane Unit/ part no 30 in the pictures
You can see the progressive movement of the shutters in the 3 shots of the whole unit and the end shot shows where the actuator clips in place. The actuator is obviously a removable/replaceable part. Why I could not get only the actuator I don't know!
The vanes are completely perfect and the unit has washed up well.You can see the progressive movement of the shutters in the 3 shots of the whole unit and the end shot shows where the actuator clips in place. The actuator is obviously a removable/replaceable part. Why I could not get only the actuator I don't know!