C2 cranks but no start

paullap · Unread post by **paullap** » 16 Oct 2018, 16:01

Hi Marc, I should practice what I preach, I was suspecting a burnt circuit board in the bsi unit, So I took it out and took it apart, no burnt area's . So I decided to check the fuses while it was on my desk, These are the fuses that my brother swears he had checked, sure enough a 20 fuse had blown, put it all together and it fired up, perfect. many thanks for the help.

Completely my own fault, do not trust anything my brother tells me.

Paul

GiveMeABreak · Unread post by **GiveMeABreak** » 16 Oct 2018, 16:05

Excellent - pleased that’s sorted and a cheap repair! I think your brother owes you a pint or two.

Unread post by **Paul-R** » 16 Oct 2018, 16:17

Asking again.

Paul-R wrote: 16 Oct 2018, 08:19 You say it was falling apart. Was anything done to fix it?

paullap · Unread post by **paullap** » 16 Oct 2018, 16:27

The key was falling apart, No i taped it up with insulation tape.

Paul

Unread post by **Paul-R** » 16 Oct 2018, 16:28

Did it work at all after that?

paullap · Unread post by **paullap** » 16 Oct 2018, 16:41

When i changed the fuse

Unread post by **Paul-R** » 16 Oct 2018, 16:50

Yes but did the car start at all after you taped the key back up?

paullap · Unread post by **paullap** » 16 Oct 2018, 17:41

The key was not the problem, The problem was the blown fuse on the BSI module

French Car Forum

C2 cranks but no start

""""""""""""""fixed"""""""

Re: C2 cranks but no start

Re: C2 cranks but no start

Re: C2 cranks but no start

Re: C2 cranks but no start

Re: C2 cranks but no start

Re: C2 cranks but no start

Re: C2 cranks but no start