Peugeot 2008. The new chapter

[Paul-R]

And memories of the quartic steering wheel.

[Huskyxantia]

I think one off the comments to the video said this is what happens when people get bored and have nothing else to do , myself ,i thought they had come up with a 4 tray cup holder .

[MattBLancs]

Not sure it's this brand, but just like this:

https://ebay.io/m/hTpYbO

Nice one Matt ive just purchased a set and the price was great they look like there tough enough too.

Just for future reference, this is my set:

Looks identical to that set on eBay I found

[Huskyxantia]

Nice set

[CitroJim]

Nice set

That comment needs to be wrapped around a bit of context

[Huskyxantia]

Nice set

That comment needs to be wrapped around a bit of context

Oh those were the days

[ozfrog]

Dangerous.... Daft.....

Why do you think it is dangerous?

[Huskyxantia]

Dangerous.... Daft.....

Why do you think it is dangerous?

Well how on earth can you put your tea or coffee in them holes at that angle lol.

[Huskyxantia]

So the new front discs arrived fast 22 hrs post not bad at all they are fitted and the difference clearly came with the brake fluid reseveroiur needing a bit taken out to drop the level back to the normal mark, as you know winding the pistons back causes the fluid to rise then this proves who ever had the car before was topping up the fluids but not taking notice of why it was needed .

[PaulC5]

When winding pistons in I usually let the fluid out of the bleed screws to help avoid dirty fluid being pushed back.

[CitroJim]

When winding pistons in I usually let the fluid out of the bleed screws to help avoid dirty fluid being pushed back.

That's a good tip Paul

[PaulC5]

I think I first came across it when we had an Astra having read somewhere that pushing the pistons in could reverse the seals in the master cylinder.

[mickthemaverick]

An adaptation of your method Paul, I have a very short tube terminating in a one way valve which I connect over the bleed nipple to ensure I don't suck any air in when pushing back the pistons. I collect the expelled fluid from each wheel in a jar for inspection afterwards!