Wheel bolt thread for 2014 C4

[Vic Evans]

Can someone please tell me what wheel bolt thread there is on Mme's car.
We're both getting too old to hold up wheel after puncture to line up bolt holes & thought one like this might make life easier.
https://www.ebay.co.uk/itm/205718958759 ... R8zUu7CGZw

[Steve Walsh]

There should be a plain stud in the vehicle toolkit, you screw that in then hang the wheel on

[Vic Evans]

There should be a plain stud in the vehicle toolkit, you screw that in then hang the wheel on

Had the car from new but don't think I've ever seen one. I'll have another butchers.

[PaulC5]

I have never found one with our cars.

[Steve Walsh]

M12 x 1.25. This one is from my C5 Aircross, and is same as all other Peugeot & Citroens I have had, Usully in sparewheel tool kit

[myglaren]

Never seen one in any of my Citroens either.

[Steve Walsh]

Maybee just for the French market but a great aid, As well as in my car I have one in workshop as I work on various cars and it fits a lot of them I also have a long unthreaded one with a taper on the end that fits all the others

[RichardW]

I had a look in my 3008 - no pin in there, but there is space in the tool tray for such a tool! So appears to be some markets only....weird!

[PaulC5]

Possible reasons may include cost cutting, less weight means better fuel economy, maybe they think UK people do not change wheels, it would not be used, it could damage the bolt hole paint, UK are strong enough to not need the tool ?

[Steve Walsh]

Taken from a C4 5 door parts list Part number 671709 number 5 in picture

[Paul-R]

Item number 5 is the tool to remove the plastic caps on the wheel bolt heads. Item number 4 is the wheel locating pin.

[Steve Walsh]

Item number 5 is the tool to remove the plastic caps on the wheel bolt heads. Item number 4 is the wheel locating pin.

You are right, Too much wine last night....

[wheeler]

They definitely have the alignment stud on UK market cars.
Not uncommon for bits of the tool kit to go missing as it goes through different owners.

[Vic Evans]

Still haven't had a butchers as we've had to deal with an ill horse who eventually had to be PTS'd .
Just assuming there's not one in the kit can someone tell me what thread I should answer?

[Steve Walsh]

M12 X 1.25