Help needed with BHZ Engine

[phil227]

Hello i am in the procees of fitting a new crankshaft to the above engine 1.6 HDI BHZ . vin VF3**************[VIN obfuscated, can be read by forum staff]

My question is what is the torque spec for the main bearings and the big ends , do you have to renew the bolts as i am getting conficting info .

If the bolts require replacment where can i buy the other than a main dealer . Thanks Phil .

[phil227]

Hello yet another request whree can i get the caps that cover the mainbearing bolts ( flywheel end knock on metal cap over bolts x2 part number if possible ) Many thanks yet again Phil .

[GiveMeABreak]

Phil

Can't help with the torques, but let me know what part numbers you need for any items on the diagram: once you have these you can order them from your dealer or elsewhere if available.

[Steve Walsh]

Not wanting to stand on Marc's toes,

The metal caps are on the diagram for engine block,
I have a copy of Autodata up to 2014, I f you give me year and vehicle model I might be able to get you torque specs

Hope this helps
Steve

[GiveMeABreak]

Thanks Steve - Engine Block Diagram too:

[phil227]

Thanks to all . Steve have you a part number for items 2 and 8 in the last diagramme . Thanks Phil .

[Steve Walsh]

Hi Phil
Numbers I have are not guaranteed to be up to date, The Mods / admin will have access to latest data.
But
Number 2. 0132 54
Number 8.0167 82

[GiveMeABreak]

So that part number for (2) is out of date Steve.

(2) MUL Hex Head Machine Screw, part: 9813900780, £3.19
(8) Well Cap on Cylinder Block, part: 016782, £2.46

[phil227]

Hello the story goes on . i am now after a con rod as the bearings have spun and damaged the inner face .
So my question is are the rods all the same i have a BHZ engine ( Vin supplied in this earlier post ) can i have a part numer if possible are all the (B) engines the same internally ?
Thanks as always Phil : north wales .