Citroen C4 1.6Hdi - P0243

[Zelbra]

Hopefully someone can help with the wiring on my
son’s Citroen C4.1.6Hdi 2007. I couldn’t get the wiring info for this specific model around the internet!
Lost the power Diagbox fault code P0243.
Replaced Turbo pressure electro valve. Checked vacuum lines and the rest including turbo itself.
I believe it is a wiring issue.
Does someone know where is the wiring from the turbo pressure electro valve ends on ECU?
Any info much appreciated!

[GiveMeABreak]

Please post your VIN in full without spaces - it will be automatically masked from public view after submitting your post & will only be visible to staff.

[Zelbra]

VF7**************[VIN obfuscated, can be read by forum staff]
Thank you!

[GiveMeABreak]

This is the descriptor for this fault code as it relates to the EMS on this vehicle and engine:

Fault Code:	P0243
Description of Fault:	Turbo pressure regulation electrovalve control: Open circuit. Open circuit or value too high for 1s.
Conditions for Fault to clear:	Ignition on
Downgrade Modes whilst Fault is active:	Cutting of the EGR butterfly (turbo air cooler), EGR valve and bypass butterfly (inlet air heater) in all operating modes Cutting of the "exhaust heat recovery" function The ECU deactivates the programming cycle of the turbo valve Cut in the programming of the stops of the turbo actuator
Symptoms:	Lack of power
Suspect Areas:	Electrical harness Connector Fuse F20 on fuse box PSF1 Turbocharger control solenoid valve

[Zelbra]

Thank you! Much appreciated!