Peugeot 207 1.6hdi Everything about.

[Huskyxantia]

Your know when its done as a muscle in the back rips lol

[Huskyxantia]

Video library
Rear shock change

[Huskyxantia]

207 1.4hdi Timing belt replacement

[Huskyxantia]

1.6hdi timing belt replacement

[Huskyxantia]

Web search for torque settings 207 rear hub nut is as confusing as follows.

65,180,300 Nm all specs for rear hub nut tightness wonder why we all get things wrong ?

[willnz]

According to Peugeot Servicebox, torque is 30m daN which converts to 300Nm

[Huskyxantia]

Adjusted the rear brake shoes , slackened off the handbrake cable first when i removed the drum what a pleasant surprise both sides revealed ,so the adjusting was done as by the correct way , now i can feel all the brakes doing that nice squeeze they do

[Huskyxantia]

As above, everything was lightly grease that had movement springs were lightly coated and them horrid spring clips too

[Huskyxantia]

Time to replace the inner tie rods . Can the rubber gaiters be pulled back so i can get the special tool in to undo the rod
Any one done this little job comments hints tips please comment on this post .

[Huskyxantia]

[Huskyxantia]

Under took the job shown in the above video today , Took 10 mins each side the special tool for undoing the inner rod is a must , its cheap £6 ebay can't do it with out it . The inner tie rods where £25.68 for 2 ebay, brand Fibe bilstein.

[Huskyxantia]

Need to check the inner tie rod gators soon to make sure the clips haven't moved , do have new ones if there needed , but after i changed the inner rods i rested the car for a few weeks and used the 308cc now the 308cc needs the calipers doing i can get this done rest the 207 then check the gaiter clips replace if need be.

[Huskyxantia]

207 just had 2 new tyres black friday deal 2 for 80 quid all in & on the drive ! Mid range too.