Dash board notification messages.
-
GiveMeABreak
- (Donor 2016)
- Posts: 41989
- Joined: 15 Sep 2015, 19:38
- x 6957
Re: Dash board notification messages.
Please note, I'm no longer active on the Forum, so won't respond to messages.
Marc
Marc
-
Hell Razor5543
- (Donor 2023)
- Posts: 14266
- Joined: 01 Apr 2012, 09:47
- x 3277
Re: Dash board notification messages.
Just a thought. Is the EGR valve electrically or vacuum operated? The reason I ask was because, on my first C5, the EGR would play up. A friend who knew about them found a tiny pinhole in the vacuum pipe very close to the valve. He nipped the pipe back, and the EGR stopped complaining.
James
ex BX 1.9
ex Xantia 2.0HDi SX
ex Xantia 2.0HDi LX
ex C5 2.0HDi VTR
ex C5 2.0HDi VTR
ex C5 2.2HDi VTX+
Yes, I am paranoid, but am I paranoid ENOUGH?
Out amongst the stars, looking for a world of my own!
ex BX 1.9
ex Xantia 2.0HDi SX
ex Xantia 2.0HDi LX
ex C5 2.0HDi VTR
ex C5 2.0HDi VTR
ex C5 2.2HDi VTX+
Yes, I am paranoid, but am I paranoid ENOUGH?
Out amongst the stars, looking for a world of my own!
-
GiveMeABreak
- (Donor 2016)
- Posts: 41989
- Joined: 15 Sep 2015, 19:38
- x 6957
Re: Dash board notification messages.
It's an electrovalve.
Please note, I'm no longer active on the Forum, so won't respond to messages.
Marc
Marc
-
Huskyxantia
- (Donor 2025)
- Posts: 3459
- Joined: 30 Jul 2018, 22:11
- x 764
Re: Dash board notification messages.
Yep electronic, hence all them wires , we've been out in the car again , no nag about the filter ,very happy. To be honest it runs so smooth you wouldn't know the egr was playing up its a nice car to drive even though i know I'm going to have problems getting in and out of it when i flare. But i will still keep it make it a drive way piece of furniture
Husky.
Thinking outside of the box is better than sitting in a dark one.

-
Huskyxantia
- (Donor 2025)
- Posts: 3459
- Joined: 30 Jul 2018, 22:11
- x 764
Re: Dash board notification messages.
Hell Razor5543 i think you may of found my problem I've just remembered the black plastic part has mastic around the joining to the metal body i didn't know that till i took it off last week only to put it back on you only see it when its turned the other way. I reckon the o ring that seals the unit may of failed then the previous owner didn't want to open the egr up so just whacked black mastic around it
Husky.
Thinking outside of the box is better than sitting in a dark one.

-
Huskyxantia
- (Donor 2025)
- Posts: 3459
- Joined: 30 Jul 2018, 22:11
- x 764
Re: Dash board notification messages.
Hi, im running a 64bit machine ive just checked now.Paul-R wrote: 24 Jul 2022, 21:49 That's probably the 32 bit version but can you confirm that (and that it's not 64 bit)?
Husky.
Thinking outside of the box is better than sitting in a dark one.

-
Huskyxantia
- (Donor 2025)
- Posts: 3459
- Joined: 30 Jul 2018, 22:11
- x 764
Re: Dash board notification messages.
So Just windows XP is 32bitRoss_K wrote: 24 Jul 2022, 21:55Ah ok, you need something a bit more modern to run virtual machines. Disregard my previous comment![]()
If you want to wipe and reinstall Windows, I've got loads of XP installation CDs. Let me know if you want me to stick one in the post
Xp pro is 64bit
My Diagbox v7 is ... 32bit .. theres my problem
Husky.
Thinking outside of the box is better than sitting in a dark one.

-
GiveMeABreak
- (Donor 2016)
- Posts: 41989
- Joined: 15 Sep 2015, 19:38
- x 6957
Re: Dash board notification messages.
That's not the case Husky.
There were multiple versions of XP, aimed at from the home user to corporates and included different features and capabilities depending on what you needed.
XP was available in either 32 or 64 bit for most versions.
Where this is relevant regarding VMs is the host operating system. and hardware. 1) The host hardware must support virtualisation technology and 2) You generally need 64 bit hardware to run VMs. VMWare Player hasn't supported VMs on a 32 bit host since about version 6. Hyper V (windows VM software) won't run on a 32 bit host.
There were multiple versions of XP, aimed at from the home user to corporates and included different features and capabilities depending on what you needed.
XP was available in either 32 or 64 bit for most versions.
Where this is relevant regarding VMs is the host operating system. and hardware. 1) The host hardware must support virtualisation technology and 2) You generally need 64 bit hardware to run VMs. VMWare Player hasn't supported VMs on a 32 bit host since about version 6. Hyper V (windows VM software) won't run on a 32 bit host.
Please note, I'm no longer active on the Forum, so won't respond to messages.
Marc
Marc
-
Huskyxantia
- (Donor 2025)
- Posts: 3459
- Joined: 30 Jul 2018, 22:11
- x 764
Re: Dash board notification messages.
So, mine should be ok in one sense operating system but sounds like possible hardware problem
Heres what i was getting.
Heres what i was getting.
Husky.
Thinking outside of the box is better than sitting in a dark one.

-
GiveMeABreak
- (Donor 2016)
- Posts: 41989
- Joined: 15 Sep 2015, 19:38
- x 6957
Re: Dash board notification messages.
That's an error concerning VMs on older software - PP2000 and Lexia software are older 16 bit programmes that aren't supported on native 64 Bit systems unless running in a 32 bit VM.
Read this article here to save regurgitating:
https://www.peugeotforums.com/threads/w ... ase.20998/
Read this article here to save regurgitating:
https://www.peugeotforums.com/threads/w ... ase.20998/
Please note, I'm no longer active on the Forum, so won't respond to messages.
Marc
Marc
-
Ross_K
- Posts: 1055
- Joined: 18 Jul 2004, 22:26
- x 110
Re: Dash board notification messages.
There are 32- and 64-bit versions of XP Pro.Huskyxantia wrote: 27 Jul 2022, 09:12 So Just windows XP is 32bit
Xp pro is 64bit
My Diagbox v7 is ... 32bit .. theres my problem
I've never had any luck with 64-bit versions of Windows when it comes to this kind of thing. Best to stick to 32-bit Windows if possible.
Like I wrote before, if you need a 32-bit install disk for XP let me know. I've got a box of them.
-
Huskyxantia
- (Donor 2025)
- Posts: 3459
- Joined: 30 Jul 2018, 22:11
- x 764
Re: Dash board notification messages.
Pm'd youRoss_K wrote: 27 Jul 2022, 16:21There are 32- and 64-bit versions of XP Pro.Huskyxantia wrote: 27 Jul 2022, 09:12 So Just windows XP is 32bit
Xp pro is 64bit
My Diagbox v7 is ... 32bit .. theres my problem
I've never had any luck with 64-bit versions of Windows when it comes to this kind of thing. Best to stick to 32-bit Windows if possible.
Like I wrote before, if you need a 32-bit install disk for XP let me know. I've got a box of them.![]()
Husky.
Thinking outside of the box is better than sitting in a dark one.

-
Hell Razor5543
- (Donor 2023)
- Posts: 14266
- Joined: 01 Apr 2012, 09:47
- x 3277
Re: Dash board notification messages.
Check on the underside of your laptop. Most manufacturers put the license sticker there. You MUST get the right version of XP for the license, as XP Home will not work with an XP Pro license, and vice versa.
James
ex BX 1.9
ex Xantia 2.0HDi SX
ex Xantia 2.0HDi LX
ex C5 2.0HDi VTR
ex C5 2.0HDi VTR
ex C5 2.2HDi VTX+
Yes, I am paranoid, but am I paranoid ENOUGH?
Out amongst the stars, looking for a world of my own!
ex BX 1.9
ex Xantia 2.0HDi SX
ex Xantia 2.0HDi LX
ex C5 2.0HDi VTR
ex C5 2.0HDi VTR
ex C5 2.2HDi VTX+
Yes, I am paranoid, but am I paranoid ENOUGH?
Out amongst the stars, looking for a world of my own!
-
GiveMeABreak
- (Donor 2016)
- Posts: 41989
- Joined: 15 Sep 2015, 19:38
- x 6957
Re: Dash board notification messages.
You can install any version you want (but 64 Bit versions require 64 bit architecture) and change the licence as needed according to the version you want to install. The licence sticker on the laptop only applies to the original factory installed version of course.
Please note, I'm no longer active on the Forum, so won't respond to messages.
Marc
Marc
-
Huskyxantia
- (Donor 2025)
- Posts: 3459
- Joined: 30 Jul 2018, 22:11
- x 764
Re: Dash board notification messages.
Ive wiped the first instalation of the lexia the command.com regedit ,found everything to do with it & manually deleted everything from the registry now ready to start again , have got also the demond tool now , 2 of the alloy wheels have been refurbished by me this morning the other 2 can wait till weekend.
Husky.
Thinking outside of the box is better than sitting in a dark one.


