Citroen and Peugeot Official Part Number Requests

[GiveMeABreak]

Yes, thanks, chilling out here.

As for 513175 - that's the only reference I have for these mountings, so you may need to find a supplier that has the 513175 part number as a manufacturer reference.

https://spareto.com/oe/513175

[Rhothgar]

No probs, Marc. Just spoken with PBR and he confirms the front bush on rear subframe is the same for all cars.

Picked one up on Ebay for £13.20 delivered! JACKPOT!

It's about time I had some good luck.

[Rhothgar]

Whilst I think about it, is 1854.24 the part number for the engine rear lower mount which straps the engine mount (which the intermediate driveshaft goes through) back to the subframe please?

[Huskyxantia]

Hi Marc,

Crankshaft pully part number required plus a diagram if possible of which way it losens & tightens plus toque settings

Many thanks

[GiveMeABreak]

Item (12) Part: 0515T3 £161.40

I'll have to try and get the other info later

[Huskyxantia]

Sorry i missed which car it was for , picasso 2.0hdi dw10.

Thanks again Marc

[Huskyxantia]

Item (12) Part: 0515T3 £161.40



I'll have to try and get the other info later

I take it item 12 is the modified pulley ?

[Rhothgar]

Whilst I think about it, is 1854.24 the part number for the engine rear lower mount which straps the engine mount (which the intermediate driveshaft goes through) back to the subframe please?

Sorry to pester Marc. Any chance of confirming this pretty please? That's an embarrassed face by the way. Hope you had a good Xmas.

[Huskyxantia]

Needing part number for the spring clamp that holds the pipe onto the turbo intake side. For my 206cc 1.6hdi

Thanks marc.

[colinsunderland]

Hi Marc

Any chance of a part number for the rear left abs sensor

Had it in a garage this afternoon who said the back of the discs rust up quite often and cause the sensor to knock against it so I might have to change the pads and discs too, is that right or is he trying to scam me lol

Are the sensors easy to change does anyone know?
I know the brake switch goes commonly on these, as the auto handbrake isn't working either, and they cause all sorts of errors, it wouldn't be that would it? Diagbox isn't giving a handbrake error but it shows on the dash

Thanks again

[GiveMeABreak]

Item (12) Part: 0515T3 £161.40



I'll have to try and get the other info later

I take it item 12 is the modified pulley ?

No indication of this - it is the original part number with the following dimensions: DIAM 157,75X30 EP 30.

[GiveMeABreak]

Needing part number for the spring clamp that holds the pipe onto the turbo intake side. For my 206cc 1.6hdi

Thanks marc.

If its (16) - Elastic Collar, then part: 1434G7

[GiveMeABreak]

Whilst I think about it, is 1854.24 the part number for the engine rear lower mount which straps the engine mount (which the intermediate driveshaft goes through) back to the subframe please?

Sorry to pester Marc. Any chance of confirming this pretty please? That's an embarrassed face by the way. Hope you had a good Xmas.

Yes, as far as Christmas this year goes - locked away and stuffing!

These are the engine mountings - no part with number listed. Let me know which item you need from the diagram.

[GiveMeABreak]

Hi Marc

Any chance of a part number for the rear left abs sensor

Had it in a garage this afternoon who said the back of the discs rust up quite often and cause the sensor to knock against it so I might have to change the pads and discs too, is that right or is he trying to scam me lol

Are the sensors easy to change does anyone know?
I know the brake switch goes commonly on these, as the auto handbrake isn't working either, and they cause all sorts of errors, it wouldn't be that would it? Diagbox isn't giving a handbrake error but it shows on the dash

Thanks again

Couldn't tell you Colin - I've never had one fail ever, but certainly knocks and weathering can cause issues.

Rear ABS Sensor, item (2), Part 4545K8, £74.99

[KennyW]

Please can the parts diagram be posted for the Underbody protection for my C5 x7

VRN : VF7**************[VIN obfuscated, can be read by forum staff]

Thanks

Kenny