You're probably sick of me by now, but I've had so many problems with this car and I'm just trying to work through them one by one.
So two of the fault codes I currently have relate to the cooling fan:
Code: Select all
P0495 : Cooling function integrated into the ECU
Characterisation : Consistency between speed of fan assembly and reference
Status : Permanent fault
Location : local .
Variables associated with the fault
Engine speed : 0 rpm
output injected : 0.00 mg/impulse
engine coolant temperature : 12 ∞C
vehicle speed : 0 kph
battery voltage : 12.32 Volt(s)
Engine status : Engine off
time elapsed since ignition positive : 249 seconds
Fan unit speed setting or fan unit high speed setting : 100 %
Fan unit low speed setting : No
air conditioning authorisation : No
air conditioning request : No
Fan unit : Inactive
air conditioning pressure : 3.526400 bar(s)
supply voltage of sensors : 5.027 Volt(s)
P0692 : Fan assembly high speed control
Characterisation : open circuit or short circuit to earth
Status : Permanent fault
Location : local .
Variables associated with the fault
Engine speed : 864 rpm
output injected : 15.42 mg/impulse
engine coolant temperature : 12 ∞C
vehicle speed : 0 kph
battery voltage : 14.01 Volt(s)
Engine status : idling
time elapsed since ignition positive : 336 seconds
Accelerator pedal position, track 1 : 6050 %
Accelerator pedal position, track 2 : 0 %
Main brake : Pressed
Redundant brake : Released
clutch : Released
air conditioning cut request : Inactive
Fan unit : Inactive
additional heating 1 input : Inactive
additional heating 2 input : Inactive
engine load : 1 N.m
ESP request status : ?
+ ignition on voltage : 0.11 V