Citroen and Peugeot Official Part Number Requests

[GiveMeABreak]

Yes, I'm sure it will do and at that price, can't go wrong if it only lasts for a few years (hopefully more!).

[C5_Jack]

Hello
I have be rear ended and I'm looking for a complete rear bumper for a C5 X7 2013 estate with all the pieces of trim.

Thank you

Jack Morgan-Smith

[GiveMeABreak]

Hi Jack, is this a part number request or a ‘wanted’ request for spares?

[C5_Jack]

Hi Mark

It is a part(s) number request.
Once I have them I can start looking for them if that make sens.

Jack

[GiveMeABreak]

Ok in that case Jack please see the table in post number one for info regarding parts requests:

viewtopic.php?p=685750#p685750

[Rhothgar]

Hi Marc,

Can I have parts fiche for M728 GDL please for suspension tops? Looking for the rubber bungs specifically. I have a knocking from the front end that mate says isn't any of the bushes or ball joints. TIA

[GiveMeABreak]

(4) is the rebound stop 96044687 (no longer available)
(5) is the Bumper Spacer 96127005 (also no longer available)
(14) is the Shock Absorber Fix Cover, 503531 (still available).

If it's anything else, let me know the item number on the diagram.

[Rhothgar]

Thanks Mark but...

Oh damn! The diagram doesn't really appear to correlate with what I have. The gaiter fixes by friction to what I assume is the bumper stop but in this image, it doesn't look as though the diameters match anywhere near!

[GiveMeABreak]

This is for your VIN ending 785, so bear in mind it's an exploded diagram.

[Rhothgar]

This is for your VIN ending 785, so bear in mind it's an exploded diagram.

Yes. That’s the correct VIN. Architect by qualification so do appreciate the exploded diagram hence my concern why it looks nothing like what is on the car!

Cheers anyway Marc. Totally bamboozled.

[GiveMeABreak]

It won't be the first time!

[xantia_v6]

The gaiter fits over a ring that is part of the strut top mount:

[Rhothgar]

The gaiter fits over a ring that is part of the strut top mount:

Oh dear! Then it seems that black rubber down stand on the mount has totally failed!!!!

How do Kingas ones match the originals. Are they exact would you happen to know?

[Huskyxantia]

Ok
Wheel Hub Bearing
if Item (4) which is (B + (14)), which is the Front Hub Bearing, then part 1606623580 (£118.51)
Cheaper PSA alternative Part No: 1623948880 @ £41.60



Engine Mount

Item (4) part no: 180944 @ £51.02



If anything else, let me know Colin.

What model would this cover ? Reason i ask , ive done 2 bearings on my 206cc 1.6hdi both have failed
Might be fake parts having a issue at the mo with ebay seller, whats the correct torque setting for the main hub nut im seeing on the net 96nm up to 350nm, ive got a slight vibration when slowing down not brakes either there all new.

[GiveMeABreak]

Diagrams and part numbers are only relevant to the specific vehicle in the original post and it's not practical for me to go back on old posts.

As you're a donating member, just ask for your own part numbers. Tell me what it is you want part numbers for here and make sure you pop your VIN up for the 206.