hey guys, I had injector 4 leaking for while now, after good clean of the shaft and seat and placing new copper washer, i set about cleaning the Injector and clamp to my surprise I didn't noticed it before the clamp feet is is broken, could possible help me source the part number or a link to the part please.
also the Injector no 3 as a different clamp compared to the rest the 3 injector but there's no leaks from comming from that Injector, do I need to change that?
Citroen C3 2011 1.4HDI DV4C (8HR)
VIN: VF7**************[VIN obfuscated, can be read by forum staff]
injector clamp
Moderator: RichardW
- GiveMeABreak
- Forum Admin Team
- Posts: 37302
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5712
Re: injector clamp
Hi - we can provide you with official live parts data for your vehicle, but this info is chargeable now, so we ask members for a £10 Forum donation which will cover you for official parts numbers and parts diagrams for up to 2 years. I have your VIN already, so if you wat to proceed, follow the links below:
A response to your question by a Forum Admin will require detailed vehicle information that requires you to have made a current contribution to the Forum. |
Donate Further Information |
Please Don't PM Me For Technical Help
Marc
Marc
-
- Posts: 18
- Joined: 08 Jul 2021, 08:49
- Location: Bradford
- My Cars: citroen c3 connxtion 2010 1.4hdi
Re: injector clamp
I rang citroen dealership, manged to source the part, ready for collection tomorrow, just wanted to ask do I need to replace the bolt too?
p.s it coms with a new bolt.
p.s it coms with a new bolt.
- GiveMeABreak
- Forum Admin Team
- Posts: 37302
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5712
Re: injector clamp
The official recommendation when replacing an actual injector is to always replace: The sealing washers, the bolts, the diesel injector flanges, the thrust buttons, and the high pressure fuel pipes.
Please Don't PM Me For Technical Help
Marc
Marc
-
- Posts: 18
- Joined: 08 Jul 2021, 08:49
- Location: Bradford
- My Cars: citroen c3 connxtion 2010 1.4hdi
Re: injector clamp
hey guys, does the plastic sleeve collar that goes over the injector, is that ment to be slightly loose or a tight snug fit when slipping it up the injector.