lets start with the important stuff
I am not mechanically minded so trying to learn as I go so please keep it in plain English
Peugeot 5008 (2009 - 2013) 2.0 HDi (Manual)
Back Story.....
Got the gar about a year ago after a few months started noticing some white smoke when cold starting when it was in the garage for brakes being done I asked them to check it out for me said it seemed like the Injector seals but they was unable (most likely unwilling) todo the work,
I sent it to another garage near where I work he agreed to collect it when I am at work (I work away all week) and get it done fore me *Great*
After a few days I get a call from him saying it is a right mess under the cover but it looks like x3 Injector clams have failed and there is a 5 to 7 day delivery time on them he is also ordering wiring looms as they are brittle from the tar (Carbon) etc
Monday or Tuesday the following week (I had to borrow the work car to get home) he advised me the injectors was being a pain to get out so he was removing the rocker cover to help remove without damaging them
He also informs me that he had to charge the battery as he left the ignition on over night
about 2 and a half weeks later I get the car back
put the key in *BEEP* EML on
Plug it in when i get home and have a quick look
The Phone app says
P2562 Turbochager (TC) Boost control Position sensor - Circuit Malfunction
P14A4 Exhaust Gas Temperature Sensor Open Circuit Or Short Circuit To Positive
P1471 DPF Regen Incomplete (I no it will finish that when it is able) Also says on this one the following under it on the same code
Electrodrive Fan 1 Operational Failure (Driver side) EDC16C3 / SID802-804 - RAS Actuator. Operating Field / Performance
I am hoping you guys can help me with this I have already send the car back to him he just keeps saying the car now needs a carbon clean (trying to get more money out of me more like) and also says when he picks it up it runs fine how ever when I run it EML on (Unless i clear it) and it is gutless after 4th gear
I have attached a few pics he sent me during the work maybe your trained eyes can stop something that is out of place
Thanx all
Shaddaz
EDIT::
I forgot to add the Cruse Control has stopped working since it came back to me just get the 3 dashes that flash when you try to turn it on
