Hello,
Is the Lucas Stop Solenoid coded to the immobiliser on a 2005 1.9D Pug Expert.
Long story short, my fuel pump died. So I fitted a new fuel pump timing belt and water pump. Easy enough job.
Wouldn't start pulled the injector pipes off at the pump cranked it and no fuel.
The pump I fitted was second hand but the gent assured me the pump was good.
The solenoid is getting 12v and the earth is a good ground.
So its ether a Faulty solenoid, I have already removed a known good one out of the old pump i bench tested this work fine, or the solenoid needs to be coded.
Thank you.
Lucas Pump Stop Solenoid coded ?
Moderator: RichardW
Re: Lucas Pump Stop Solenoid coded ?
On a 2005 it will be a coded stop solenoid. I doubt you will be able to recode a used one to your van.
Is this a DW8 engine or XUD?
Is this a DW8 engine or XUD?
-
- Posts: 9
- Joined: 31 Dec 2020, 19:04
- Location: Durham
- My Cars: Pug Expert 1.9D
VW Passat 2.0
KIA Sportage 2.0
Re: Lucas Pump Stop Solenoid coded ?
DW8 engine I think. I will fit the old one that i know works to the pump then thank you.
-
- Moderating Team
- Posts: 11574
- Joined: 02 Apr 2005, 16:11
- Location: Charmouth,Dorset
- My Cars: Currently:
C5 X7 VTR + Satnav Hdi estate Silver
C5 X7 VTR + Hdi Estate 2008 Red
In the past: 3, CX td Safaris and about 7, XM td estates. Lovely cars. - x 1204
Re: Lucas Pump Stop Solenoid coded ?
I believe the coded one has a multiple wire connector, the uncoded one just a screw terminal - its a long time since I've seen one but that's how I remember them.
Peter
Peter