Failing to install Diagbox
Moderator: RichardW
-
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- Location: Somewhere in North Wales, Anglesey
- My Cars: M reg Xm S2 2.1td Auto Exclusive. 269k and rising
L reg XM S1 V6 12v Manual SEi
L 94 XM 2.1 TD auto total resto
2008 Peugeot 207 Sw 1.6 16v hdi. 217k and rising
2010 Peugeot 207 SW 1.6 8v HDi 161k and rising - x 71
Failing to install Diagbox
Hi all..
Ive recently picked up a netbook, with windose XP on it.. Im trying to installl Diagbox from Easy Diagnostic .. it unpacks installs then when it comes to Customer name Im told to enter easy123 .. which I do, I then get a screen for activation with PC Identifeir and name info but in the box below it says NO CODE NEEDED.. so I assume I need to install as manual mode..
Has anyone else used Easy Diagnostic, or has anyone another customer name I can use etc..
After the Identifier box I then get an error in installation, start again..
Any one have any ideas? Shall I get some screen shots of what its dooing if it helps.
Cheers
Paul
Ive recently picked up a netbook, with windose XP on it.. Im trying to installl Diagbox from Easy Diagnostic .. it unpacks installs then when it comes to Customer name Im told to enter easy123 .. which I do, I then get a screen for activation with PC Identifeir and name info but in the box below it says NO CODE NEEDED.. so I assume I need to install as manual mode..
Has anyone else used Easy Diagnostic, or has anyone another customer name I can use etc..
After the Identifier box I then get an error in installation, start again..
Any one have any ideas? Shall I get some screen shots of what its dooing if it helps.
Cheers
Paul
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
-
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- Location: Somewhere in North Wales, Anglesey
- My Cars: M reg Xm S2 2.1td Auto Exclusive. 269k and rising
L reg XM S1 V6 12v Manual SEi
L 94 XM 2.1 TD auto total resto
2008 Peugeot 207 Sw 1.6 16v hdi. 217k and rising
2010 Peugeot 207 SW 1.6 8v HDi 161k and rising - x 71
Re: Failing to install Diagbox
So.. these are the pictures of the sequence I get..
I assume I need to generate an activation code for this.. however the instructions I got dont tell me this..
I assume I need to generate an activation code for this.. however the instructions I got dont tell me this..
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
- myglaren
- Forum Admin Team
- Posts: 25464
- Joined: 02 Mar 2008, 13:30
- Location: Washington
- My Cars: Mazda 6
Ooops.
Previously:
2009 Honda Civic :(
C5, C5, Xantia, BX, GS, Visa.
R4, R11TXE, R14, R30TX - x 4920
Re: Failing to install Diagbox
Lots have bought from Easy Diagnostics Paul and find them excellent. Does look like installation is tricky though.
Jim at Easy Diagnostics will help if you can't manage but there will be useful info here before long.
Jim at Easy Diagnostics will help if you can't manage but there will be useful info here before long.
-
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- Location: Somewhere in North Wales, Anglesey
- My Cars: M reg Xm S2 2.1td Auto Exclusive. 269k and rising
L reg XM S1 V6 12v Manual SEi
L 94 XM 2.1 TD auto total resto
2008 Peugeot 207 Sw 1.6 16v hdi. 217k and rising
2010 Peugeot 207 SW 1.6 8v HDi 161k and rising - x 71
Re: Failing to install Diagbox
Yes. I cant understand why I'm getting a different sequence to what the instructions are..
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
- myglaren
- Forum Admin Team
- Posts: 25464
- Joined: 02 Mar 2008, 13:30
- Location: Washington
- My Cars: Mazda 6
Ooops.
Previously:
2009 Honda Civic :(
C5, C5, Xantia, BX, GS, Visa.
R4, R11TXE, R14, R30TX - x 4920
Re: Failing to install Diagbox
Never entertained it as I won't use Windows so no help at all here I'm afraid.
-
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- Location: Somewhere in North Wales, Anglesey
- My Cars: M reg Xm S2 2.1td Auto Exclusive. 269k and rising
L reg XM S1 V6 12v Manual SEi
L 94 XM 2.1 TD auto total resto
2008 Peugeot 207 Sw 1.6 16v hdi. 217k and rising
2010 Peugeot 207 SW 1.6 8v HDi 161k and rising - x 71
Re: Failing to install Diagbox
Here's the instructions I've got to go with it.
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
- GiveMeABreak
- Forum Admin Team
- Posts: 37332
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5721
Re: Failing to install Diagbox
I've responded to your PM Paul, before I saw your post here.
You are not getting the same screen, so can you confirm that you have 1) Enabled your WiFi / network card and 2) made sure you have NO active internet connection before you started the installation?
So you must activate your network card (have it switched on or not disabled during installation) - but just make sure you have disconnected from any activated WiFi connections so it can't connect to the internet.
It needs your network card to be enabled in order to generate a profile that is based on your laptop hardware and it uses the network card to do this.
Now though, you will have to uninstall the lot and start from scratch AFTER you have used Diagbox cleaner to fully uninstall and clean up all the files - or it will not work if you try and just reinstall it again over the old installation.
You are not getting the same screen, so can you confirm that you have 1) Enabled your WiFi / network card and 2) made sure you have NO active internet connection before you started the installation?
So you must activate your network card (have it switched on or not disabled during installation) - but just make sure you have disconnected from any activated WiFi connections so it can't connect to the internet.
It needs your network card to be enabled in order to generate a profile that is based on your laptop hardware and it uses the network card to do this.
Now though, you will have to uninstall the lot and start from scratch AFTER you have used Diagbox cleaner to fully uninstall and clean up all the files - or it will not work if you try and just reinstall it again over the old installation.
Please Don't PM Me For Technical Help
Marc
Marc
-
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- Location: Somewhere in North Wales, Anglesey
- My Cars: M reg Xm S2 2.1td Auto Exclusive. 269k and rising
L reg XM S1 V6 12v Manual SEi
L 94 XM 2.1 TD auto total resto
2008 Peugeot 207 Sw 1.6 16v hdi. 217k and rising
2010 Peugeot 207 SW 1.6 8v HDi 161k and rising - x 71
Re: Failing to install Diagbox
Oh ok. Network wifi card is ON but wifi is off..so I need wifi on but no connection..
Where do I get diagbox cleaner from..?
Where do I get diagbox cleaner from..?
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
- GiveMeABreak
- Forum Admin Team
- Posts: 37332
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5721
Re: Failing to install Diagbox
If you have a switch that you can use to toggle the newtork / WiFi card on or off - make sure it is on to enable the card.
When it is enabled, make sure that when it tries to make a wifi connection to your router that you click on the lower right icon in the windows taskbar, where your WiFi connections are usually shown, then disconnect any connections it has made and do not allow it to 'Connect Automatically'.
I will send you a link in a PM to the cleaner utility.
When it is enabled, make sure that when it tries to make a wifi connection to your router that you click on the lower right icon in the windows taskbar, where your WiFi connections are usually shown, then disconnect any connections it has made and do not allow it to 'Connect Automatically'.
I will send you a link in a PM to the cleaner utility.
Please Don't PM Me For Technical Help
Marc
Marc
-
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- Location: Somewhere in North Wales, Anglesey
- My Cars: M reg Xm S2 2.1td Auto Exclusive. 269k and rising
L reg XM S1 V6 12v Manual SEi
L 94 XM 2.1 TD auto total resto
2008 Peugeot 207 Sw 1.6 16v hdi. 217k and rising
2010 Peugeot 207 SW 1.6 8v HDi 161k and rising - x 71
Re: Failing to install Diagbox
That's set as you said Marc..
Another pm sent regarding the cleaner..
Another pm sent regarding the cleaner..
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
-
- Donor 2023
- Posts: 13743
- Joined: 01 Apr 2012, 09:47
- Location: Reading
- My Cars: C5 Mk2 VTX+ estate.
- x 3007
Re: Failing to install Diagbox
Ah. The reason the installation worked on my netbook is that it has both a wired and wireless network capabilities, so when I turned off the WiFi capability the DiagBox installation probably worked because it could still create a profile. Paul, that would explain why I could not give you that help you required (as I did not know about the need to have a network card live but not connected to the Internet).
James
ex BX 1.9
ex Xantia 2.0HDi SX
ex Xantia 2.0HDi LX
Ex C5 2.0HDi VTR
Ex C5 2.0HDi VTR
C5 2.2HDi VTX+
Yes, I am paranoid, but am I paranoid ENOUGH?
Out amongst the stars, looking for a world of my own!
ex BX 1.9
ex Xantia 2.0HDi SX
ex Xantia 2.0HDi LX
Ex C5 2.0HDi VTR
Ex C5 2.0HDi VTR
C5 2.2HDi VTX+
Yes, I am paranoid, but am I paranoid ENOUGH?
Out amongst the stars, looking for a world of my own!
-
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- Location: Somewhere in North Wales, Anglesey
- My Cars: M reg Xm S2 2.1td Auto Exclusive. 269k and rising
L reg XM S1 V6 12v Manual SEi
L 94 XM 2.1 TD auto total resto
2008 Peugeot 207 Sw 1.6 16v hdi. 217k and rising
2010 Peugeot 207 SW 1.6 8v HDi 161k and rising - x 71
Re: Failing to install Diagbox
I tried again this morning after some advice.from marc... unfortunately it still didnt work.. so.. I happen to have another netbook.. a Toshiba nb100 with xp pro on it..
The diagclean program worked on this one where it would not on the samsung..
So I shall try on this one and see where I get..
The diagclean program worked on this one where it would not on the samsung..
So I shall try on this one and see where I get..
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
- GiveMeABreak
- Forum Admin Team
- Posts: 37332
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5721
Re: Failing to install Diagbox
Ok, keep at it Paul - it's a love/ hate relationship with this and no two installations are generally ever the same because of the hardware differences and BIOS settings.
Just make sure you disable anti antivirus software first, and run the programme with admin rights.
Just make sure you disable anti antivirus software first, and run the programme with admin rights.
Please Don't PM Me For Technical Help
Marc
Marc
-
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- Location: Somewhere in North Wales, Anglesey
- My Cars: M reg Xm S2 2.1td Auto Exclusive. 269k and rising
L reg XM S1 V6 12v Manual SEi
L 94 XM 2.1 TD auto total resto
2008 Peugeot 207 Sw 1.6 16v hdi. 217k and rising
2010 Peugeot 207 SW 1.6 8v HDi 161k and rising - x 71
Re: Failing to install Diagbox
Well ffs ... I'm pleased to say it was the netbook at fault.. using this toshiba and it's now working and installing the full files.
Sorry for the hassles yesterday..
Ill update this again once I know I'm up and running fully but I'm further ahead then I was yesterday..
Its xp.. and dedicated for diagnostic so I'm not too worried about antivirus..
Yaay one step further...
Sorry for the hassles yesterday..
Ill update this again once I know I'm up and running fully but I'm further ahead then I was yesterday..
Its xp.. and dedicated for diagnostic so I'm not too worried about antivirus..
Yaay one step further...
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
-
- Donor 2023
- Posts: 13743
- Joined: 01 Apr 2012, 09:47
- Location: Reading
- My Cars: C5 Mk2 VTX+ estate.
- x 3007
Re: Failing to install Diagbox
Yay, great news.
You might want to ask Marc for the hardware checker, so you can find out what hardware version your interface is. Mine is Rev B, and somehow is working with DiagBox 7.15 (it should only manage 7.14!).
You might want to ask Marc for the hardware checker, so you can find out what hardware version your interface is. Mine is Rev B, and somehow is working with DiagBox 7.15 (it should only manage 7.14!).
James
ex BX 1.9
ex Xantia 2.0HDi SX
ex Xantia 2.0HDi LX
Ex C5 2.0HDi VTR
Ex C5 2.0HDi VTR
C5 2.2HDi VTX+
Yes, I am paranoid, but am I paranoid ENOUGH?
Out amongst the stars, looking for a world of my own!
ex BX 1.9
ex Xantia 2.0HDi SX
ex Xantia 2.0HDi LX
Ex C5 2.0HDi VTR
Ex C5 2.0HDi VTR
C5 2.2HDi VTX+
Yes, I am paranoid, but am I paranoid ENOUGH?
Out amongst the stars, looking for a world of my own!