Hi again guys,
Car failed the test one item is the front brake caliper. My mate has a new 206 brake caliper do any of you happen to know if they are the same?
Thanks
207 Front brake caliper question
Moderator: RichardW
-
- Posts: 947
- Joined: 16 Oct 2014, 12:17
- Location: Meath Ireland
- My Cars: 2008 Laguna 1.5 DCi
- x 235
207 Front brake caliper question
Oh buggle
- EDC5
- (Donor 2020)
- Posts: 1216
- Joined: 01 Jul 2017, 21:48
- Location: N. Wales
- My Cars: Citroen C5 RHR AM6
- x 120
Re: 207 Front brake caliper question
If you post the VIN from both vehicles then someone can check compatibility with servicebox.
-
- Posts: 947
- Joined: 16 Oct 2014, 12:17
- Location: Meath Ireland
- My Cars: 2008 Laguna 1.5 DCi
- x 235
Re: 207 Front brake caliper question
I took off the caliper and the piston pushed in easily. The pads were stuck in the caliper bracket and the bottom guide pin is very tight the rubber part on the end seems to be rubbing inside the hole. I will take it off and clean it tomorrow. is the rubber anti vibration? would it work ok without it? I don't think there's anything wrong with the caliper. New discs and pads going on tomorrow
Oh buggle
-
- Posts: 251
- Joined: 04 Oct 2018, 14:26
- Location: mid wales
- My Cars: pug306, citroen picasso
- x 14
Re: 207 Front brake caliper question
Sometimes the parts exploded views can be a great help, also ECP to find out compatability/sameness.
Corroded in pads seem more frequent these days. I "service" the pads ( remove, de rust, paint and lube ( the backing plate and where they sit/rest in the "pad holders" ) before and after winter. A hassle yes but worth doing if you have the kit and knowledge. I have to do this task on our m/bikes as well.
Corroded in pads seem more frequent these days. I "service" the pads ( remove, de rust, paint and lube ( the backing plate and where they sit/rest in the "pad holders" ) before and after winter. A hassle yes but worth doing if you have the kit and knowledge. I have to do this task on our m/bikes as well.
-
OnlineGiveMeABreak
- Forum Admin Team
- Posts: 37331
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5721
Re: 207 Front brake caliper question
I certainly would not recommend ECP for parts lookups - they are invariably wrong as has been commented by many members, myself included.
Always best to get proper OEM part numbers first, then you can cross reference. There are a lot of aftermarket parts databases that are simply inaccurate and do not account for model variations.
As you can see there are various repair kits for your 207:
(3): BRAKE PAD KIT
(4): BRAKE CALIPER YOKE
(5): BRAKE CALIPER REPAIR KIT
(6): SET COLUMN SCREW
If you want part numbers for any of these, shout.
Always best to get proper OEM part numbers first, then you can cross reference. There are a lot of aftermarket parts databases that are simply inaccurate and do not account for model variations.
As you can see there are various repair kits for your 207:
(3): BRAKE PAD KIT
(4): BRAKE CALIPER YOKE
(5): BRAKE CALIPER REPAIR KIT
(6): SET COLUMN SCREW
If you want part numbers for any of these, shout.
Please Don't PM Me For Technical Help
Marc
Marc
-
- Posts: 947
- Joined: 16 Oct 2014, 12:17
- Location: Meath Ireland
- My Cars: 2008 Laguna 1.5 DCi
- x 235
Re: 207 Front brake caliper question
Thanks guys! On this occasion it was actually the wheel bearing that had failed. I splashed out on Brembo brakes and discs however the wheel bearing was very tight and hard to turn. It was very difficult to get out I ended up using an outer CV joint from a Hyundai Accent to "tap" it out. Luckily it was a very good fit on the bearing but the joint is a no longer usable! I used service box to look up the part numbers
Oh buggle
-
- Posts: 947
- Joined: 16 Oct 2014, 12:17
- Location: Meath Ireland
- My Cars: 2008 Laguna 1.5 DCi
- x 235
Re: 207 Front brake caliper question
picassodad wrote: ↑18 Feb 2019, 10:43 Sometimes the parts exploded views can be a great help, also ECP to find out compatability/sameness.
Corroded in pads seem more frequent these days. I "service" the pads ( remove, de rust, paint and lube ( the backing plate and where they sit/rest in the "pad holders" ) before and after winter. A hassle yes but worth doing if you have the kit and knowledge. I have to do this task on our m/bikes as well.
I put a little dab of Mintex break grease on the ends of the pads and the springs. I always used copper grease but it appears brake grease is needed.
Oh buggle