xantia 1995 19td, g box has gone v noisy i rebuilt it around 10 years ago at 120k now 0n 245k i think the main shaft bearings are shot again , i have been offered a box from a 1900td zx 1993 how can i tell whether it'll fit it looks the same but is it?
All help[ appreciated Tim
identifying g box type
-
Bobcat
- Posts: 12
- Joined: 12 Jan 2009, 21:28
identifying g box type
if it aint broke fix it anyway
-
Stewart(oily)
- Posts: 923
- Joined: 07 Oct 2005, 16:31
- x 35
Re: identifying g box type
Probably, I have successfully transplanted gearboxes from a number of donors, a TD ZX should have a BE3 box.
BXs since 1993 built 1.9 TZD turbo, got a S2 Xantia estate, brilliant car! 2013, Xantia HDI LX 110 2000 new car with 122,000, l C2 HDI Rusty rocket, C3 Picasso HDI new to me.
-
citroenxm
- Fallen Hero
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- x 70
Re: identifying g box type
It WILL be the same.
ALL TD equpit cars of this eira used the BE 3/5 box and they ALL used the pull clutch.
As long as the donar car be it ZX, 306 or 405 is DEAFENATLY a Turbo D 1.9.. then you be perfectly fine. No problem!
ALL TD equpit cars of this eira used the BE 3/5 box and they ALL used the pull clutch.
As long as the donar car be it ZX, 306 or 405 is DEAFENATLY a Turbo D 1.9.. then you be perfectly fine. No problem!
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
-
Bobcat
- Posts: 12
- Joined: 12 Jan 2009, 21:28
Re: identifying g box type
Oh it's defiantly a 1900rd the injection pump from it is on my car and so are the injectors so as its gratis I will go and take it.out.
Incidentally does the be3suffer from diff problems
Tim
Incidentally does the be3suffer from diff problems
Tim
if it aint broke fix it anyway
-
citroenxm
- Fallen Hero
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- x 70
Re: identifying g box type
Not diff but more weak syncro on third gear.. ive not heard of diff issues. Im no expert though..
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
-
Xantidote
- Posts: 1146
- Joined: 03 May 2009, 22:07
- x 5
Re: identifying g box type
The BE3 gearboxes on my previous BX DTR, & current Xantia TD, have exhibited weaker synchros on 2nd, rather than 3rd. On the TD, I find the slight crunch in 2nd occurs when the engine/gearbox oil is cold, the more so in winter IIRC. Will shortly find out over the next few months.
As regards using a gearbox from another model, I question whether the gear and diff ratios will be the same, although obviously as a system, it will still work. Sometime after my 1995 TD was built, the rev counter was changed (I won't say upgraded) from mechanical to electrical.
As regards using a gearbox from another model, I question whether the gear and diff ratios will be the same, although obviously as a system, it will still work. Sometime after my 1995 TD was built, the rev counter was changed (I won't say upgraded) from mechanical to electrical.
Martin
1995 Xantia TDLX (deceased
)
1995 Xantia TDLX (deceased
-
citroenxm
- Fallen Hero
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- x 70
Re: identifying g box type
TD rev counters have ALWAYS been electronic, and got their signal from a Black Sensor on the side of the Diff, and picked its signal from the back the of flywheel.
Ive not known of a mechanical rev counter on Xantia or 306/405 td's - unless Im mistaken.
Ive not known of a mechanical rev counter on Xantia or 306/405 td's - unless Im mistaken.
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
-
Xantidote
- Posts: 1146
- Joined: 03 May 2009, 22:07
- x 5
Re: identifying g box type
Oooopscitroenxm wrote:Ive not known of a mechanical rev counter on Xantia or 306/405 td's - unless Im mistaken.
Martin
1995 Xantia TDLX (deceased
)
1995 Xantia TDLX (deceased
-
citroenxm
- Fallen Hero
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- x 70
Re: identifying g box type
Lol no worries.. in fact it was earlyer then 1995.. it was in 1994 M reg they changed.. or is M reg 1995.. gawd i get so confused what letter is for what year..
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto