Xsara Picasso Rear axle

This is the Forum for all your Citroen Technical Questions, Problems or Advice.
SuperKingCheese
Posts: 12
Joined: 17 Sep 2023, 11:36
x 2

Xsara Picasso Rear axle

Unread post by SuperKingCheese »

Hi everyone,

I need to replace the rear axle on my old Picasso, it's a 2003 model 2.0 HDI.

I have been looking online at getting a refurbished axle as I don't want to source one from a scrappy, there seem to be many websites in my country (France) and over in the UK who refurbish and sell these axles and they all mention the same thing, that their axles are compatible with all models of Picasso. Now I know there are some models with drum brakes and others with discs and different engine sizes and fuel types. So my question is, is this true? If I buy one of these axles, is it going to be compatible with my car?

The website that was recommended to me is: https://www.imaxle.co.uk/xsara-picasso-all-models and it mentions nothing about if this axle came from a car with drums or discs and just says it will fit any model.

I just don't want to go buying something that I'm not sure about. So if there is anyone here who knows about these axles I would be grateful of some help. The part number I found on my cars axle is 9634 838
User avatar
GiveMeABreak
(Donor 2016)
Posts: 41989
Joined: 15 Sep 2015, 19:38
x 6955

Re: Xsara Picasso Rear axle

Unread post by GiveMeABreak »

If you need an original, genuine part number or part diagram, and can't already find the info you need on the Forum, we do ask for a membership upgrade for official parts data as we are in turn charged for this. It will cover you for future part number requests for up to 2 years, so excellent value.

If interested, links are below, then pop your VIN up.
A response to your question by a Forum Admin requiring parts or additional information requires you to have made a current contribution (£10 min.) to the Forum.
To Upgrade Your Membership & Donate Click Here

For Further Information About Vehicle Parts and VIN Numbers Click Here


There is a crossmember torsion bar and then there are the rear arm hubs & bearings.

If it's the rear torsion bar, then if you have normal suspension (not heavy duty suspension) then it is the same for all models.
Please note, I'm no longer active on the Forum, so won't respond to messages.

Marc