Dispatch starter removal
Moderator: RichardW
-
- Posts: 329
- Joined: 27 Sep 2015, 12:06
- x 21
Dispatch starter removal
Further to my last post on thread “ battery going flat,if I do need to change the starter , how hard is it? Looks a right p I t a, as can only see one bolt, how many are there?
Cheers Rich
-
- Posts: 329
- Joined: 27 Sep 2015, 12:06
- x 21
-
- Posts: 329
- Joined: 27 Sep 2015, 12:06
- x 21
Re: Dispatch starter removal
So can nobody answer this question for me then? It’s a 20101.6 his
Cheers Rich
-
Online
- Donor 2023
- Posts: 13745
- Joined: 01 Apr 2012, 09:47
- x 3008
Re: Dispatch starter removal
Give it a little time. People may be away for the weekend. I am not able to help you myself, as I have not used a Dispatch.
James
ex BX 1.9
ex Xantia 2.0HDi SX
ex Xantia 2.0HDi LX
Ex C5 2.0HDi VTR
Ex C5 2.0HDi VTR
C5 2.2HDi VTX+
Yes, I am paranoid, but am I paranoid ENOUGH?
Out amongst the stars, looking for a world of my own!
ex BX 1.9
ex Xantia 2.0HDi SX
ex Xantia 2.0HDi LX
Ex C5 2.0HDi VTR
Ex C5 2.0HDi VTR
C5 2.2HDi VTX+
Yes, I am paranoid, but am I paranoid ENOUGH?
Out amongst the stars, looking for a world of my own!
-
- Donor 2023
- Posts: 5744
- Joined: 05 Jul 2012, 18:07
- x 2895
Re: Dispatch starter removal
I don't know if this is the same as your 1.6Hdi, but Citroen list about an hour and a quarter to remove and refit.
Sadly no longer a C5 owner
-
- Posts: 329
- Joined: 27 Sep 2015, 12:06
- x 21
Re: Dispatch starter removal
Thanks for that, looks the same, and this morning it wouldn’t start first time, holding the key and turning ignition off and on a few times got it going, so it looks like the starter or solenoid is knackered, , going to try and get it done at the garage, as I need it for long trip on Wednesday ,and can’t risk taking it if it’s not going to start . Need to be somewhere by 9 am Thursday. Does it sound like lazy starter or starter switc to you?
Cheers Rich
-
Online
- Donor 2023
- Posts: 13745
- Joined: 01 Apr 2012, 09:47
- x 3008
Re: Dispatch starter removal
I had to replace the starter motor om my C5. I got a Bosch reconditioned motor from GSF for around £120, but I got back around half of that when I returned the old motor in the packaging. The problem with mine was that it was getting slower and taking longer to start. When I fired up the new one I thought the whole car would turn over, it spun up that fast!
James
ex BX 1.9
ex Xantia 2.0HDi SX
ex Xantia 2.0HDi LX
Ex C5 2.0HDi VTR
Ex C5 2.0HDi VTR
C5 2.2HDi VTX+
Yes, I am paranoid, but am I paranoid ENOUGH?
Out amongst the stars, looking for a world of my own!
ex BX 1.9
ex Xantia 2.0HDi SX
ex Xantia 2.0HDi LX
Ex C5 2.0HDi VTR
Ex C5 2.0HDi VTR
C5 2.2HDi VTX+
Yes, I am paranoid, but am I paranoid ENOUGH?
Out amongst the stars, looking for a world of my own!
-
- Posts: 25
- Joined: 15 Apr 2018, 23:04
- x 1
Re: Dispatch starter removal
Hiya.
Is yours a 1.6 hdi?
Is yours a 1.6 hdi?
-
- Posts: 329
- Joined: 27 Sep 2015, 12:06
- x 21
Re: Dispatch starter removal
Cheers Rich
-
- Moderating Team
- Posts: 7445
- Joined: 21 Dec 2015, 12:46
- x 1752
Re: Dispatch starter removal
Not unknown for IGN switches themselves to fail to connect, and intermittently.
Worth checking there's voltage on the switch-to-starter cable when key is turned to crank?
Worth checking there's voltage on the switch-to-starter cable when key is turned to crank?
Chris
-
- Posts: 329
- Joined: 27 Sep 2015, 12:06
- x 21
Re: Dispatch starter removal
Going to auto electrician tomorrow , so will ask him to check it.
Cheers Rich
-
- Posts: 25
- Joined: 15 Apr 2018, 23:04
- x 1
Re: Dispatch starter removal
Starters aren't too bad on then. Fiddley.
Get bettery and battery box out, some air piping for top bolt. Bottom two arent so bad, wiring is easy.
It can come out without taking any exhaust stuff off, shoehorn it out the drivers side of the exhaust pipe gap near the bottom engine mount.
Only go for a good starter, don't want issues when pitting them back in. Leave bottom two bolts undone before putting top in.
Not a bad job when you've done a few. Remeber first time i was most irritated how mich stuff was in the way etc.
Get bettery and battery box out, some air piping for top bolt. Bottom two arent so bad, wiring is easy.
It can come out without taking any exhaust stuff off, shoehorn it out the drivers side of the exhaust pipe gap near the bottom engine mount.
Only go for a good starter, don't want issues when pitting them back in. Leave bottom two bolts undone before putting top in.
Not a bad job when you've done a few. Remeber first time i was most irritated how mich stuff was in the way etc.
-
- Forum Admin Team
- Posts: 37456
- Joined: 15 Sep 2015, 19:38
- x 5743
Re: Dispatch starter removal
Ok, let's try Starter this time and not Alternator (it was a long day)
So wait 15 minutes before disconnecting battery so ECUs can memorise data.
There you go!
So wait 15 minutes before disconnecting battery so ECUs can memorise data.
- Disconnect the battery.
- Place the vehicle on a lift.
- Remove the under engine protection.
Remove:
| Remove bolts (3). |
| Refitting Note: Check that the centring pin is present (at "a"). Refit:
|
Please Don't PM Me For Technical Help
Marc
Marc
-
- Posts: 329
- Joined: 27 Sep 2015, 12:06
- x 21
Re: Dispatch starter removal
Marc, that’s for the alternator lol, it’s the starter I want to remove.
Cheers Rich
-
- Forum Admin Team
- Posts: 37456
- Joined: 15 Sep 2015, 19:38
- x 5743
Re: Dispatch starter removal
Oh, what a top hat! I think I had alternators on the brain from helping somebody else recently and lost the plot there!
I’ll sort that shortly and update that previous post!
I’ll sort that shortly and update that previous post!
Please Don't PM Me For Technical Help
Marc
Marc