Does anyone know how too.....

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
citroenxm
Posts: 8061
Joined: 30 Dec 2004, 23:10
Location: Somewhere in North Wales, Anglesey
My Cars: M reg Xm S2 2.1td Auto Exclusive. 269k and rising
L reg XM S1 V6 12v Manual SEi
L 94 XM 2.1 TD auto total resto

2008 Peugeot 207 Sw 1.6 16v hdi. 217k and rising
2010 Peugeot 207 SW 1.6 8v HDi 161k and rising
x 70

Does anyone know how too.....

Post by citroenxm »

Undo this massive bulkhead connection:

Image

so I can rescue the harness as much a possible!

Xantia interior MAIN loom through to engine bay in case you cant work out where or what exactley...
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project

A very sad...
1994 XM 2.1 d auto
andmcit
Posts: 4299
Joined: 03 Mar 2005, 17:59
Location: Swansea - South Wales
My Cars:
x 30

Re: Does anyone know how too.....

Post by andmcit »

There's a couple of really deep torx screws IIRC Paul - took me ages to work this one out!
Nothing moves you like a Citroën
addo
Sara Watson's Stalker
Posts: 7098
Joined: 19 Aug 2008, 12:38
Location: NEW South Wales, Australia. I'll show you "Far, far away" ;-)
My Cars: Peugeot 605
Citroën Berlingo
Alfa 147
x 93

Post by addo »

Have you exposed the other side, by pulling up the plastic cover in the scuttle corner?
andmcit
Posts: 4299
Joined: 03 Mar 2005, 17:59
Location: Swansea - South Wales
My Cars:
x 30

Re: Does anyone know how too.....

Post by andmcit »

Quite right Adam - it's undone from the scuttle side - didn't look at the picture long enough! lol
Nothing moves you like a Citroën
citroenxm
Posts: 8061
Joined: 30 Dec 2004, 23:10
Location: Somewhere in North Wales, Anglesey
My Cars: M reg Xm S2 2.1td Auto Exclusive. 269k and rising
L reg XM S1 V6 12v Manual SEi
L 94 XM 2.1 TD auto total resto

2008 Peugeot 207 Sw 1.6 16v hdi. 217k and rising
2010 Peugeot 207 SW 1.6 8v HDi 161k and rising
x 70

Re: Does anyone know how too.....

Post by citroenxm »

Yea been in there seen the screws got them out then what.. gentle persuasion or a little more heavy handed???
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project

A very sad...
1994 XM 2.1 d auto
andmcit
Posts: 4299
Joined: 03 Mar 2005, 17:59
Location: Swansea - South Wales
My Cars:
x 30

Re: Does anyone know how too.....

Post by andmcit »

There's more screws to undo then - it WILL fall out when they're all undone - no persuasion is required!
I recall the exact same feeling about this as you have ATM!
Nothing moves you like a Citroën
addo
Sara Watson's Stalker
Posts: 7098
Joined: 19 Aug 2008, 12:38
Location: NEW South Wales, Australia. I'll show you "Far, far away" ;-)
My Cars: Peugeot 605
Citroën Berlingo
Alfa 147
x 93

Post by addo »

Don't you then have to release the clip "fingers" shown in your photo, then extract the bezel from the scuttle side?

I'd imagine it then exposes the retainers for each half plug.
Post Reply