help please WTD 1.9TD Xantia PAS return valve

bigblock · Unread post by **bigblock** » 13 May 2010, 14:30

hi all,im just new here,so please be gentle.after try unsuccesfully for three days to find a return valve for power steering the one on the passenger side bulkhead with the two metal connectors and with the rubber hose that goes to the steering rack i wonder if some kind soul can tell me where to get one,ive tried dealers and online breakers all to no avail,regards bb

Unread post by **Paul-R** » 13 May 2010, 14:48

Probably need to know what car it's for...

bigblock · Unread post by **bigblock** » 13 May 2010, 19:39

sorry matey,xantia 1997 1.9 turbo dlx.bb

Xaccers · Unread post by **Xaccers** » 13 May 2010, 20:17

I've updated the title to be a bit more descriptive

Unread post by **CitroJim** » 13 May 2010, 20:21

I cannot think of what part this is bigblock

The only Xantia I know with something that vaguely fits this description is the V6 and that item is utterly unique to that vehicle and mounted on the nearside chassis rail below the battery.

Can you post a picture of the item in question please?

What is the problem it is causing?

bigblock · Unread post by **bigblock** » 13 May 2010, 22:23

hi,ive been told that its a cigarette sized aluminium box mounted on the inner front wing,it has two metal couplings and a rubber over flow type pipe.it also has two couplings blanked off with two screws,it is sited above the nearside drive shaft,oil is peeing out of these bodged blanks.bb

citronut · Unread post by **citronut** » 13 May 2010, 23:52

that will be the anti sink valve, and can be fixed by just unscrewing the end/cap and fitting a new O ring,

below is the part and trade price you would require if fitting new and not just a new seal,

Part Number Description Quantity Price excl. VAT Price incl. VAT Total incl. VAT Selection
0000529302 VALVE 81.88 GBP 96.21 GBP 96.21 GBP

0000529301 VALVE 81.88 GBP 96.21 GBP 96.21 GBP

the first one is for cars with HYDRACTIVE, and the second one for NON H/A,

regards malcolm

addo · Unread post by **addo** » 14 May 2010, 09:54

Malcolm, is there anything special about that O-ring?

I'm asking because (if mammary serves me correctly) it fails on most cars around 100K miles. So - mine's about due anytime! People here have intimated that some aspect of it was different to a regular O-ring.

Thanks, Adam.

citronut · Unread post by **citronut** » 14 May 2010, 13:18

citroen dont list the seal for the anti sink valve, but i sure it is the same as one of the two diferent sized pump seal,

Martin from Pleaides i think says the prob is caused be the seal seat in the A/S valve body

regards malcolm

bigblock · Unread post by **bigblock** » 17 May 2010, 19:19

sorry for the late reply but the small aluminium box is on the passenger side under the bulkhead above the nearside drive shaft,im still being told that it is a return valve and if taken off for a length of time the whole front end wouldhave to be fork trucked up,sorry for this but im a numpty im at a loss now as one dealer sent me a abs box and im told that it is the small fag box part that i need,HHHEEEELLLP PPLLEEASSE.BB