How not to do it!

Stuart McB · Unread post by **Stuart McB** » 30 Dec 2004, 00:12

Good point this picture.We should all think about safety first. You can see that this guy is sure to have an accident. No welding goggles I ask you. [:D][:D]

Unread post by **philhoward** » 30 Dec 2004, 00:55

Those don't look like steel toe cap boots, either...

Stuart McB · Unread post by **Stuart McB** » 30 Dec 2004, 01:07

Are those cross ply tyers? And get a saftey cut out fitted to that welder.

jeremy · Unread post by **jeremy** » 30 Dec 2004, 04:49

What about this!
http://www.ekpass.com/SAFETY%20-%20Need ... ssment.htm
jeremy

bxbodger · Unread post by **bxbodger** » 30 Dec 2004, 14:49

Australian I presume?[:D]
Then again, maybe not, at least he's chocked the wheel.........

ACTIVE8 · Unread post by **ACTIVE8** » 30 Dec 2004, 17:37

I think the bloke is about as thick, as the two short planks he is using to hold it up !
What a plonker !

ACTIVE8 · Unread post by **ACTIVE8** » 30 Dec 2004, 17:53

If you want to see some other pictures of things that have been lifted, and what went wrong then take a look at this site:-
http://craneaccidents.com/index.htm
You can view the photo gallery without subscription.
Planning a lift, and doing it safely should be the first consideration before you even attempt to lift it, the pictures are revealing!

Stuart McB · Unread post by **Stuart McB** » 31 Dec 2004, 00:28

Never ever happened to my Tonka Toys. I always made sure that the load was not greater than the lift capacity of the Tonka LOL.