Xantia leaking sphere

Sherbert · Unread post by **Sherbert** » 01 Mar 2004, 21:42

Xantia 1.9 TD 97
I've got a leaking sphere mounted on the front end of the engine itself. I'm sure it near the system depressure value but I can't work out if it the accumulator sphere or an ordinary one. The Suspension spheres have all been replaced within the last 2 years.
Does anyone know which it is please ?
My engine clicks more frequently than 45 seconds anyway so I would need to replace it anyhow.
Thanks

AndersDK · Unread post by **AndersDK** » 01 Mar 2004, 21:47

If it's the sphere mounted directly on engine block - then it's the main accumulator sphere - same type fitting all earlier generation hydraulic Citroens.
If the sphere is fitted on a chassis part as sphere no. 2 found down in engine bay - clearly not on engine - then it's the HA2 front center sphere.

noz · Unread post by **noz** » 01 Mar 2004, 22:11

sherbert,
Where in the UK are you located. If you're near Scotland, I'll have a look if you like.
Cheers
norrie

Sherbert · Unread post by **Sherbert** » 02 Mar 2004, 17:03

Thank you all. I live in Oxford, but thanks for the offer to take a look.
I'm going to order the Front suspension accumualtor.
Are the Accumulator Sphere different to the normal suspension ones?

alexx · Unread post by **alexx** » 02 Mar 2004, 17:36

They are all different
Suspension corner spheres have damper valves. Other spheres (accumulator, HA middle spheres, A/S sphere) are without them.

AndersDK · Unread post by **AndersDK** » 02 Mar 2004, 20:41

Sherbert - just read thru the postings again.
It IS in fact the "MAIN accumulator sphere" you need - it's only approx £20 brand new unit from GSF - no need to hassle around for regassed or second hand units.