Dispatch 2.0 dw10cd underboost issues

[Roastyduck]

Purchased a dispatch that had boost issues causing limp mode.

Had to map the fault codes out to prevent limp mode to do some logging, im around 400-500mbar under expected boost with the reference value very high so the ecu is trying to demand more to get it to the desired.

Mapped the egr out for testing but made no difference.

Fault codes are

P0299
P2566
P1496
P2563

Drives fairly fine otherwise allthough feels a bit laggy and boost takes a while to kick in properly.

Little white smoke out the rear at higher rpm.
Smoke test shows a small leak at the front under the intake manifold but im not sure its enough to drop 400-500mbar.

Any ideas of the best way to diagnose this or where im looking? Quite new to the 2.0hdi engines though ive tinkered with the 1.6.

Seller said he changed maf, map turbo and egr, old ones are in the door pocket (turbo isnt)

[mickthemaverick]

It is always helpful to post the descriptions of the fault codes to save potential helpers having to look them up.