RT6 2.75.c.5 Firmware / Software Download

[Pmm_P]

So, the clone didn’t work.
I used HDD Raw Copy Tool v2.6 to clone the old SD image to a FAT formatted SD card.
All the partitions showed up in the new SD and I ran chkdsk on all of them to repair any corrupted files.
Installed the radio back in the car and now it’s stuck in boot loop.
The logo and the fan come on for a second, then switch off and the radio reboots again…
I guess I’ll need a fresh firmware installed.
Do you know where I can find v.2.77 or 2.80?
Thanks for your help

[Paul-R]

Check your PM for links.

With a a bit of luck you might find that the configuration has cloned over.

It's possible that some of the components on you head unit's motherboard have failed but you won't know that until you get the SD card installed preoperly.

[Pmm_P]

Thanks Paul.
Yesterday I went for another try.
This time I copied the backup.img to the SD but cleaned the Windows System Volume Information from all the partitions before installing the SD back in the radio.
Once I switched on the ignition, the radio was working, was able to change radio stations and volume but the screen was stuck on the logo…
Today I’ll go for one last try with a new 32GB SD, if it doesn’t work, I’ll go for the full firmware installation.

[Eliya0067]

Can someone please send me the software? I have problems with the SD card on my RT6 radio.

[Paul-R]

Can someone please send me the software? I have problems with the SD card on my RT6 radio.

What version are you looking for? I don't have 2.75 as I think it was only ever fitted at the factory. I do have 2.77 as next nearest though.