Xantia noisy over bumps

This is the Forum for all your Citroen Technical Questions, Problems or Advice.
Online
peter306
Posts: 198
Joined: 11 Nov 2013, 12:44
x 60

Re: Xantia noisy over bumps

Unread post by peter306 »

Passed the mot with a couple of advisories.
It's going back on the ramps this weekend and i'm going to partly dismantle the ram and get my micrometer on it.
I'll post any results next week.

Peter
Citroen GSA flat4 engine written off
Citroen BX 1.4 gone
Citroen BX 1.6 gone
Citroen Xantia 1.8 gone
Citroen Xantia 1.8 still living now 148 k
Online
peter306
Posts: 198
Joined: 11 Nov 2013, 12:44
x 60

Re: Xantia noisy over bumps

Unread post by peter306 »

Think i've found it

Can these be repaired, i remember someone mentioned a circlip.
The ram is a tight fit.

Peter
Citroen GSA flat4 engine written off
Citroen BX 1.4 gone
Citroen BX 1.6 gone
Citroen Xantia 1.8 gone
Citroen Xantia 1.8 still living now 148 k
Online
peter306
Posts: 198
Joined: 11 Nov 2013, 12:44
x 60

Re: Xantia noisy over bumps

Unread post by peter306 »

gave the rod a clean
20260420_163458.jpg
Citroen GSA flat4 engine written off
Citroen BX 1.4 gone
Citroen BX 1.6 gone
Citroen Xantia 1.8 gone
Citroen Xantia 1.8 still living now 148 k
Online
peter306
Posts: 198
Joined: 11 Nov 2013, 12:44
x 60

Re: Xantia noisy over bumps

Unread post by peter306 »

Anyone.
I'm going to put a rubber o ring into the cup as a shock absorber. See ig that stops the noise.
Also asking in for sale or wanted.

Peter
Citroen GSA flat4 engine written off
Citroen BX 1.4 gone
Citroen BX 1.6 gone
Citroen Xantia 1.8 gone
Citroen Xantia 1.8 still living now 148 k
Online
peter306
Posts: 198
Joined: 11 Nov 2013, 12:44
x 60

Re: Xantia noisy over bumps

Unread post by peter306 »

Eventually getting round to having a go at this, I think that once the bolt is tightened up it is pressing on the spacer before it gets to the thrust washers. If thats the case the bearings aren't as pressed as they should be.
I've got a new repair kit (Timken) coming and can get some shims of ebay, according to AI they are 30mm OD and 22mm ID.
Ive seen a method to measure the thickness of the required shim but can't find it, can anyone point me in the right direction, it involved measuring from the bearing to the spacer end but that's all I remember.

Peter
Citroen GSA flat4 engine written off
Citroen BX 1.4 gone
Citroen BX 1.6 gone
Citroen Xantia 1.8 gone
Citroen Xantia 1.8 still living now 148 k
User avatar
Stickyfinger
(Donor 2016)
Posts: 11852
Joined: 28 Mar 2013, 21:05
x 2006

Re: Xantia noisy over bumps

Unread post by Stickyfinger »

Let us know ...
Alasdair
Activa, the Moose Dodger