Hi
I just replaced injector no 4 in my 2018 Citroen C4 Grand Picasso 2.0 HDI DW10F. I coded the new injector to ECU but i can't turn off EML it keeps showing fault code P3035 driving conditions not suitable for resetting the diesel injectors. And the engine is idling at 1250rpm. I would be very grateful if anyone had this problem and has any ideas of how to fix it!
Thanks.
Injector coding
-
Paul-R
- Moderating Team
- Posts: 8967
- Joined: 07 May 2009, 16:24
- x 1860
Re: Injector coding
When you coded the the new injector in you count from the gearbox end of the engine as that is the way that PSA number their engines?
As I get older I think a lot about the hereafter - I go into a room and then wonder what I'm here after.
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson
-
mickthemaverick
- Moderating Team
- Posts: 20112
- Joined: 11 May 2019, 17:56
- x 7777
Re: Injector coding
Just to be sure you are counting the cylinders in the correct PSA way, No 1 at the flywheel end? 
I used to be indecisive, now I'm not so sure!
I used to ride on two wheels, but now I need all four!
I used to ride on two wheels, but now I need all four!
-
Paul812
- Posts: 3
- Joined: 16 Mar 2026, 19:41
Re: Injector coding
Yeah, the one i replaced is closest to the timing belt!
-
Paul-R
- Moderating Team
- Posts: 8967
- Joined: 07 May 2009, 16:24
- x 1860
Re: Injector coding
What are you using to code in the new injector?
'
'
As I get older I think a lot about the hereafter - I go into a room and then wonder what I'm here after.
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson
-
mickthemaverick
- Moderating Team
- Posts: 20112
- Joined: 11 May 2019, 17:56
- x 7777
Re: Injector coding
You may find this helpful, there is a language option at the top
https://poszukaj.elektroda.pl/qa,blad-p ... iesel.html
https://poszukaj.elektroda.pl/qa,blad-p ... iesel.html
I used to be indecisive, now I'm not so sure!
I used to ride on two wheels, but now I need all four!
I used to ride on two wheels, but now I need all four!
-
Paul812
- Posts: 3
- Joined: 16 Mar 2026, 19:41
Re: Injector coding
Launch creader elite V2.0. It has changed the code for me but it's still showing the P3035 fault