RT6 (RNEG2) SD card image (.img) needed

[Imed81200]

Hello everyone,

I have a Citroën DS4 with the RT6 (RNEG2) head unit. Unfortunately, I accidentally formatted the original microSD card and now my unit only shows a black screen or freezes on the Citroën logo. The CD drive keeps spinning and it doesn’t read my USB stick with the firmware update (2.86).

Since the internal SD card is empty, I believe I need a complete RT6 system image (.img) to write onto a new microSD (8GB or 16GB).

Could someone please share a working RT6 SD card image dump (version 2.20 or 2.86)?
A Mega/Google Drive link would be really helpful.

Thank you very much for your help!

Best regards

[mickthemaverick]

I believe there are members who will be able to help here but I'm afraid I'm not one of them, good luck!

[Paul-R]

I doubt you will get a system image. Apart from anything else, there are a multitude of different options across the vehicles with an RT6 fitted.

You need to persevere with your firmware update. What have you got on your USB stick? How large is it? 8GB is as large as is needed. 32GB is as large as should be used. Also, USB 2 maximum, not USB 3.

[PSAmember308]

Hello everyone,

I am looking for a complete RT6 / RNEG2 SD card image (.img) for my navigation unit.

Vehicle:

- Peugeot 308
- Model Year: 2012

Head Unit:

- Magneti Marelli RT6
- Part number: 9803461XH
- Production date: 30/10/2012

Problem:

The unit is stuck in a boot loop.

It only shows the Peugeot logo. It restarts continuously. The CD drive spins up, then ejects the firmware CD. The firmware update never starts.

After removing the unit, I checked the internal 8 GB microSD card.

The partition table is still present (3 partitions), but creating a sector-by-sector image fails with CRC errors (Error 23 Win32 Disk Imager). Windows also becomes extremly slow whenever the SD card is inserted, so I believe the internal SD card has physically failed.

I already have a new microSD card ready for replacment.


What I am looking for:

I am not looking for firmware 2.86 only.

I am looking for:

- a complete RT6 / RNEG2 SD card image (.img), or
- a pre-programmed replacment SD card, or
- someone who can clone a working RT6 SD card.


Any help would be greatly appreciated.

Thank you very much!

[Paul-R]

I have responded to your other post of your request. But note also what I said in the post above yours here about getting a suitable image.