Xantia gear gaitor

mcgregor · Unread post by **mcgregor** » 22 Sep 2005, 19:36

I would like to change the gear lever gaitor on my Xantia but for the life of me cannot see how you can get the gear knob off to do that. Can anyone tell me
Dave

jeremy · Unread post by **jeremy** » 22 Sep 2005, 20:34

BX and I think ZX just unscrew - very tight!
jeremy

mcgregor · Unread post by **mcgregor** » 23 Sep 2005, 13:17

Thanks. If its just tight its very tight, and basically I'm frightened to put any more force on it in case I break something. It just doesn't feel like it unscrews if you know what I mean.
Dave

mezuk04 · Unread post by **mezuk04** » 23 Sep 2005, 14:02

Dont some just pull off?

mcgregor · Unread post by **mcgregor** » 27 Sep 2005, 12:45

I've now tried unscrewing and pulling and nothing seems to work. I really am frightened to try putting any more force on it in case I break the gearchange. Surely someone has replaced or removed a 2001 HDi gearknob at some time.

406 V6 · Unread post by **406 V6** » 27 Sep 2005, 14:48

If it has the rign for engaging reverse gear, then it should be a pull type.
Get one of those pliers that have a screw to open or close

get with a pice of rag so not to damage the lever. Secure the lever with it and pull as hard as you can the knob.

mcgregor · Unread post by **mcgregor** » 27 Sep 2005, 14:52

Thanks for the reply, but no it is not a lift up ring to engage reverse. Also the gaitor top seems to be conected in some way to the gearknob, in other words it does not slide down like others I have seen in the past. I can't believe such a simple thing is giving me such grief!!
Dave

wilkobob · Unread post by **wilkobob** » 27 Sep 2005, 18:01

The ZX with the "leather" gear knob is the same as most xantias. The knob does just pull off, but takes some force. It sometimes comes off better if you just twist backwards and forwards and pull. The end of the gear stick is like a "+" shape with "ribs" down it to hold the knob on (thus twisting and pulling usually frees it).

mcgregor · Unread post by **mcgregor** » 27 Sep 2005, 18:10

Thanks very much. That does indeed sound possible. I shall try it as soon as I get time probably the weekend now.
Thanks
Dave

RoadkillUK · Unread post by **RoadkillUK** » 28 Sep 2005, 01:08

I changed mine the other day as it was tatty, cost me a fiver from the scrappies. Haynes says twist a little and pull. I say PULL, worked for me

Disclaimer: Don't come crying to me if you break it.