How do I adjust the clutch. I've just replace the release arm after it snapped. Now the clutch pedal is right above the brake.
Thanks in advance
Adjusting a 205 GLD Clutch
Moderator: RichardW
-
- (Donor 2022)
- Posts: 2632
- Joined: 14 Mar 2001, 23:41
- Location: Epsom, Surrey
- My Cars: 2010 Citroen C5-X7 tourer
1998 Citroen Saxo 1.5D
2018 Citroen C4-B7
1998 Peugeot 306. 1.9D
2011 Citroen C1 - x 72
- Contact:
Measure the travel from highest point to the floor. It should be 130 to 150mm. If it's out, undo the lock nut at the gearbox end of the cable, then turn the adjustment nut backwards/forwards until the measurement at the pedal is correct. The clutch pedal will always be higher than the brake. Before measuring, press the pedal down several times.
I've managed to adjust the clutch to a reasonable level. However, now there is a noise during clutch in and around the bite point. Does this mean its finally knackered? The noise goes after a few changes.
Any ideas, I don't want to change the clutch, as the car is going to the car dealer in the sky very soon
Any ideas, I don't want to change the clutch, as the car is going to the car dealer in the sky very soon