Help needed please bs1003

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

daveyboii71
Posts: 3
Joined: 08 Jun 2024, 13:54

Help needed please bs1003

Post by daveyboii71 »

Hi all I'm new here hope you can help I have a 2014 Peugeot 308 16 hdi 158 thousand on the clock owned it about 6 months and everything has been fine with it

Yesterday engine management light appeared and on the stereo it Said engine fault see dealer or something like that

I have a topdon bt800 I plugged it in and it had a few faults which I cleared but the b1003 remained and engine management light stayed on

I have read a few posts regarding this but from various sites and conflicting information so any help would be appreciated

Many thanks Dave
Attachments
This is from the topdon
This is from the topdon
RichardW
Forum Treasurer
Posts: 11083
Joined: 07 Aug 2002, 17:12
x 1054

Re: Help needed please bs1003

Post by RichardW »

I think it unlikely that is putting the engine light on, what faults are/ were in the engine ECU?
Richard W
daveyboii71
Posts: 3
Joined: 08 Jun 2024, 13:54

Re: Help needed please bs1003

Post by daveyboii71 »

Hi they came up as historic so I cleared them and don't have the details of them the only code showing now is the b1003 I can quickly run a check again and see if any more have shown up since I cleared them
daveyboii71
Posts: 3
Joined: 08 Jun 2024, 13:54

Re: Help needed please bs1003

Post by daveyboii71 »

OK so I do a full rescan and this is what has shown up I have managed to reset and engine management light is off at the moment
Attachments
1717853945794.png