I am an Activaist-v6 and a 2.1Estateerr

Contains the Activa Register, Buyers Guide and Activa "finds" on eBay and elsewhere. Post Activa-specific items that do not fall naturally into the Citroen Forum.

Moderator: RichardW

User avatar
Stickyfinger
(Donor 2016)
Posts: 10492
Joined: 28 Mar 2013, 22:05
x 1323

Re: I am an Activaist-v6 and a 2.1Estateerr

Post by Stickyfinger »

Just a note.....who cares when they replace it free of charge, life time, no quibble anyway ?
Alasdair
Activa, the Moose Rider
3x C5x7 Steering racks and counting
User avatar
Stickyfinger
(Donor 2016)
Posts: 10492
Joined: 28 Mar 2013, 22:05
x 1323

Re: I am an Activaist-v6 and a 2.1Estateerr

Post by Stickyfinger »

A little bit of work happened today....

Well that looks horrid....heated and now soaking in penetrant
20240303_152101.jpg
Prep work on the V6 (288mm disks) caliper upgrade for the 2ltr TCT Activa
20240303_152040.jpg
I had to drill out and re-tap the disk retention screws
20240303_152049.jpg
Alasdair
Activa, the Moose Rider
3x C5x7 Steering racks and counting
User avatar
bobins
Donor 2023
Posts: 5804
Joined: 05 Jul 2012, 18:07
x 2941

Re: I am an Activaist-v6 and a 2.1Estateerr

Post by bobins »

Just out of interest, Alasdair, what's your favoured rust converter / treatment ?
Sadly no longer a C5 owner :(
User avatar
Stickyfinger
(Donor 2016)
Posts: 10492
Joined: 28 Mar 2013, 22:05
x 1323

Re: I am an Activaist-v6 and a 2.1Estateerr

Post by Stickyfinger »

Bilt & Hamber 100%
Alasdair
Activa, the Moose Rider
3x C5x7 Steering racks and counting
User avatar
Stickyfinger
(Donor 2016)
Posts: 10492
Joined: 28 Mar 2013, 22:05
x 1323

Re: I am an Activaist-v6 and a 2.1Estateerr

Post by Stickyfinger »

Can you paint some new wheels for my Trials Land Rover ? he asked......Sure thing I say
Bit of a rush, need them by the weekend he says......Sure thing I say

Then he does this with them !......and no, it is not broken and he drove out of it !....I understand it is called "flex"
James wheels.jpg
Alasdair
Activa, the Moose Rider
3x C5x7 Steering racks and counting
User avatar
mickthemaverick
Donor 2024
Posts: 13809
Joined: 11 May 2019, 17:56
x 6095

Re: I am an Activaist-v6 and a 2.1Estateerr

Post by mickthemaverick »

That looks a bit like a skeleton chassis to me -- it's got nobody to go with? :-D
I used to be indecisive, now I'm not so sure!
I used to ride on two wheels, but now I need all four!
User avatar
Stickyfinger
(Donor 2016)
Posts: 10492
Joined: 28 Mar 2013, 22:05
x 1323

Re: I am an Activaist-v6 and a 2.1Estateerr

Post by Stickyfinger »

Nope, Defender....but just the frame, the rest (suspension mounts etc etc) chopped off and new axles, arms, free floating springs etc added.

If it is not having a mud bath he just throws it at rocks and off cliffs......Mad bugger !

All thick wall tube under the body work.....which is green plastic chemical barrels cut to fit and riveted on !
28700977_1084973308310294_3110810843101305396_o.jpg
Alasdair
Activa, the Moose Rider
3x C5x7 Steering racks and counting
User avatar
Stickyfinger
(Donor 2016)
Posts: 10492
Joined: 28 Mar 2013, 22:05
x 1323

Re: I am an Activaist-v6 and a 2.1Estateerr

Post by Stickyfinger »

With the departure of the XM, I am now a diesel free Zone.
20240502_093704.jpg
Alasdair
Activa, the Moose Rider
3x C5x7 Steering racks and counting
User avatar
CitroJim
A very naughty boy
Posts: 49838
Joined: 30 Apr 2005, 23:33
x 6264

Re: I am an Activaist-v6 and a 2.1Estateerr

Post by CitroJim »

It's quite an easy task to convert an Activa to be powered by a 2.1TD Alasdair ;)

Something to bear in mind when you start to miss this big gap in your automotive life...
Jim

Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
User avatar
Stickyfinger
(Donor 2016)
Posts: 10492
Joined: 28 Mar 2013, 22:05
x 1323

Re: I am an Activaist-v6, 2ltr'er and an AX'er

Post by Stickyfinger »

A little bit of AX work needed today.

I spotted a tiny "rust stain" so I thought I would have a look......I stuck in a thin screwdriver......I found two 3mm "pin holes" that were strangely next to each other with no other signs of rot.
I sanded the stone chip away, opened up the holes to make way for a small patch to be made and etched the clean metal ready for welding.

Very strange....
Untitled.jpg
Alasdair
Activa, the Moose Rider
3x C5x7 Steering racks and counting
User avatar
CitroJim
A very naughty boy
Posts: 49838
Joined: 30 Apr 2005, 23:33
x 6264

Re: I am an Activaist-v6 and a 2.1Estateerr

Post by CitroJim »

I reckon the result of a flaw in the metal Alasdair, possibly a bit of slag when it was made...
Jim

Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
User avatar
Stickyfinger
(Donor 2016)
Posts: 10492
Joined: 28 Mar 2013, 22:05
x 1323

Re: I am an Activaist-v6 and a 2.1Estateerr

Post by Stickyfinger »

Hole is now De-Holed.......wire feed and welder power all set to the lowest setting ...No2 power blew a hole in the AX tin-foil/original thickness of metal :)
20240523_141203.jpg
I will zinc prime it, fiber glass putty (waterproof) and "dress" that whilst it is soft to recreate the thickness and texture of the stone-chip coating before putting a primer/colour coat on top...as well as touching up the bare metal earth contact on the jacking tag.
Alasdair
Activa, the Moose Rider
3x C5x7 Steering racks and counting
User avatar
CitroJim
A very naughty boy
Posts: 49838
Joined: 30 Apr 2005, 23:33
x 6264

Re: I am an Activaist-v6 and a 2.1Estateerr

Post by CitroJim »

Good work Alasdair :D
Jim

Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...