driveshaft seal numbers ML6C 6 speed gearbox

[BVL]

Hi everybody,

I try to find the right driveshaft seals for my 6 speed gearbox but the major car part sites keep suggesting me the wrong stuff for a different type of gearbox.

I'm looking for diveshaft seal numbers for my 2015 308SW 1.6 bluehdi with 6 speed manual gearbox ML6C ? or 20MB39 ?


Thanx in advance,

Bart.

[Oldpug]

Why not use your Peugeot Main Dealer ?

[GiveMeABreak]

Hi everybody,

I try to find the right driveshaft seals for my 6 speed gearbox but the major car part sites keep suggesting me the wrong stuff for a different type of gearbox.

I'm looking for diveshaft seal numbers for my 2015 308SW 1.6 bluehdi with 6 speed manual gearbox ML6C ? or 20MB39 ?


Thanx in advance,

Bart.

We can help if you need an original, genuine part number or part diagram, and can't already find the info you need on the Forum. For this service, we do ask for a membership upgrade for official parts data as we are in turn charged for this. It will cover you for future part number requests for up to 2 years, so excellent value.

If interested, links are below, then provide your vehicle's VIN in full, which will be masked automatically when you submit your post.

A response to your question by a Forum Admin requiring parts or specific vehicle information requires you to have made a current contribution (Min. £10 / €11.48 or equivalent) to the Forum.

To Upgrade Your Membership & Donate Click Here For Further Information About Vehicle Parts and VIN Numbers Click Here

Or as suggested above, get them from your dealer.

[BVL]

Is there also a procedure for removing and installing the gearbox available ? I am going to replace my clutch

VIN VF3**************[VIN obfuscated, can be read by forum staff]

gearbox ML6C 20MB39 6 speed manual.

Thanx

[Rp0thejester]

I know full well GiveMe will give you a full break down, try in the part number section so he can see it. He doesn't often see single posts like this

[BVL]

I know full well GiveMe will give you a full break down, try in the part number section so he can see it. He doesn't often see single posts like this

Ok Thanks !