Replacement LHM reservoir top rubber seal

This is the Forum for all your Citroen Technical Questions, Problems or Advice.
sbraud
Posts: 158
Joined: 04 Nov 2004, 20:46

Replacement LHM reservoir top rubber seal

Unread post by sbraud »

Hi all,
Does anyone know if our gracious hosts, GSF, stock a replacement LHM reservoir top rubber seal. I’ve done a search but can’t find anything… Alas nothing new there !! [:o)][;)]
My one is leaking all over reservoir, despite cleaning it and seal twice…
Cheers
Steve
jeremy
Posts: 3959
Joined: 20 Oct 2002, 16:00
x 2

Unread post by jeremy »

Is your LHM level excessive? Overfilling is the usual cause of reservoir leakage.
As a matter of interest I've been around this board for some time now and have never heard of anyone replacing this seal.
Jeremy
dnsey
Posts: 1538
Joined: 20 Oct 2004, 01:39
x 19

Unread post by dnsey »

I'd be interested!
Both my Xantias leak round this seal, despite the LHM level being correct.
I had thought of using silicone sealantunder the gasket.
sbraud
Posts: 158
Joined: 04 Nov 2004, 20:46

Unread post by sbraud »

Thanks Jeremy,
No, tank is `right on the money'. Rubber feels slightly spongy, as if it’s soaked up some LHM after all those years (10) sitting on top of reservoir.
Steve
johnlyn
Posts: 64
Joined: 16 May 2004, 14:22

Unread post by johnlyn »

I have a spare if required complete assembly, but from a 95 1.9TD LX not sure if same as VSX
John
KevMayer
Posts: 1051
Joined: 12 Sep 2003, 22:01
x 2

Unread post by KevMayer »

I get a puddle of LHM on top of my reservoir too.
My level is correct but each time I open the bonnet there is a puddle of green martian blood.
Maybe its the result of running down invisible aliens !!
User avatar
CitroJim
A very naughty boy
Posts: 54541
Joined: 30 Apr 2005, 23:33
x 8045

Unread post by CitroJim »

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by KevMayer</i>

I get a puddle of LHM on top of my reservoir too.
My level is correct but each time I open the bonnet there is a puddle of green martian blood.
Maybe its the result of running down invisible aliens !!
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
That gave me a good giggle... Maybe that is what LHM is. Martian blood...
I have the same problem. Somehow I think all Xantias have this condition..
I ignore it. I just wipe it up every time I check the oil and water.
citronut
Posts: 10937
Joined: 29 Apr 2005, 00:46
x 94

Unread post by citronut »

there are three posible causes for citro/blood being found on top of tank,
(1)being the usual to much fluid in tank,a lot of people dont know how to check this corectly
(2)missing the apature when topping up citro/blood
(3)posibly a leak from one or more of the rubber unions where pipes leave the tank
to check you level park car on level ground fully up on the highest setting,at this point the yellow disc not the copper one should be inbetween the two red bands on the level indiccator regards malcolm
citronut
Posts: 10937
Joined: 29 Apr 2005, 00:46
x 94

Unread post by citronut »

ps the rubber coller is ment to stop dirt ingres imto the tank
User avatar
Kowalski
Posts: 2557
Joined: 15 Oct 2003, 17:41

Unread post by Kowalski »

I found that after disturbing the dirt and cleaning the seal and tank, my Xantia started leaking around this seal. It seems to have stopped leaking there now, and the levels are correct so, if it ain't broke, I'm not going to fix it.
Peter.N.
Moderating Team
Posts: 11761
Joined: 02 Apr 2005, 16:11
x 1237

Unread post by Peter.N. »

In my experience of 10 various hydropnumatic Citroens, they all leak around the reservoir cover, May be something to do with over enthusiastic conering!
citronut
Posts: 10937
Joined: 29 Apr 2005, 00:46
x 94

Unread post by citronut »

perhapes the plastic tank becomes distorted around this airear,because cits with metal tank only suffer this prob when over filled,spilage or leaking from pipes around this point regards malcolm
sbraud
Posts: 158
Joined: 04 Nov 2004, 20:46

Unread post by sbraud »

<hr noshade size="1"><font size="1"> I have a spare if required complete assembly, but from a 95 1.9TD LX not sure if same as VSX
John</font id="size1"><hr noshade size="1">
Cheers John I'll look into compatibility... although I think they'll be the same. How much are asking? And am I right in thinking tank, seal & central tube cluster?
Thanks
Steve