DW10F Timing belt

Unread post by **Steve Walsh** » 20 Oct 2023, 17:49

Hi all knowledgeable folk

Has anyone got timing belt removal / installation instructions for a 508 2.0 hdi DW10F
VF3**************[VIN obfuscated, can be read by forum staff]
It belongs to a mate of mine, also a member on here., Come to line the crank/flywheel and camshaft but cant find the hole in the flywheel, I have the hole in the engine block behind the starter but cant seem to find one in the flywheel.

I have done dozens of PSA belts and might have to resort to old school and put some marks on it

Thanks

Steve

GiveMeABreak · Unread post by **GiveMeABreak** » 20 Oct 2023, 22:35

Sorry Steve, I don't have the procedure for this engine.

Unread post by **Steve Walsh** » 21 Oct 2023, 05:09

No Prob, Old school it is then....Keep me busy on a wet Saturday

Unread post by **Steve Walsh** » 21 Oct 2023, 07:22

Job done, There is another location hole in the cylinder block below the starter motor for setting flywheel. Rest of it just like the DW10B etc.....
During stripdown also found the Acc Belt has 2 tensioners and both need releasing to enable the belt to come off...

GiveMeABreak · Unread post by **GiveMeABreak** » 21 Oct 2023, 10:08

I suspected it may be similar, but didn't want to refer you to procedures that may be incorrect. Thanks for the udpate.

French Car Forum

DW10F Timing belt

DW10F Timing belt

Re: DW10F Timing belt

Re: DW10F Timing belt

Re: DW10F Timing belt

Re: DW10F Timing belt