Spoiler

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
dillosk8ter
Posts: 217
Joined: 28 Nov 2004, 23:17
Location: United Kingdom
My Cars:

Spoiler

Post by dillosk8ter »

Hey guys. Can anyone advise on fitting a GTI/TZD spoiler to hatch of my BX14? Got spoiler just need to know how to fit......
JBUK
Posts: 19
Joined: 18 May 2004, 04:00
Location:
My Cars:

Post by JBUK »

Its held on to the hatch by a self tapping screw and a 10mm nut on a stud set in the spoiler on each side. The screw is fairly long (around 5-6 cm)so make sure you use exactly the right length.
To fit just drill 4 holes in the correct position in the hatch using the spoiler as a template and tighten it up. No sealant/adhesive is used.
citronut
Posts: 10937
Joined: 29 Apr 2005, 00:46
Location: United Kingdom east sussex
My Cars:
x 92

Post by citronut »

what colour is you car as i have bx 1.9D in dark grey with spoiler all ready on regards malcolm
dillosk8ter
Posts: 217
Joined: 28 Nov 2004, 23:17
Location: United Kingdom
My Cars:

Post by dillosk8ter »

Thanks for that!! My car's Triton Green, got Triton Green spoiler (luckly!!)
citronut
Posts: 10937
Joined: 29 Apr 2005, 00:46
Location: United Kingdom east sussex
My Cars:
x 92

Post by citronut »

ok best of luck
wilkobob
Posts: 330
Joined: 26 Sep 2004, 00:29
Location: Retford, United Kingdom
My Cars:
Contact:

Post by wilkobob »

as mentioned, just a case of carefully measuring and drilling holes in correct places. Did the same "upgrade" to my bx when I had it, was very easy due to the plastic boot lid.
Post Reply