Xantia H.D.i. 2.0L

This is the Forum for all your Citroen Technical Questions, Problems or Advice.
stevestix8
Posts: 151
Joined: 06 Jul 2010, 20:34
x 13

Xantia H.D.i. 2.0L

Unread post by stevestix8 »

Hi All,

Haven't posted for a while and it's not a big problem but my car is about 24 yr old and have had some rubber sections needed replacing (Mostly LHM pipes, due to the life span of the rubber).

The other day driving along I changed gear and the plastic / rubber gear knob just fell apart! It has been degrading for some time but now the housing is cracked and bits falling off.

So I have been looking on ebay etc for a replacement gear knob. My problem is I am not sure which fits my car, It needs to be 'lift reverse' and standard 5 gear 'H' arrangement.

Can anyone confirm if it needs to be a Citroen standard part or will another standard 'lift reverse' gear knob work?

I have found this 1 on Ebay but am not sure if it will work?

https://www.ebay.co.uk/itm/252583509329

Has anyone changed their Gear knob on a 98 Xantia?

Steve
Top
User avatar
Huskyxantia
(Donor 2025)
Posts: 3423
Joined: 30 Jul 2018, 22:11
x 757

Re: Xantia H.D.i. 2.0L

Unread post by Huskyxantia »

That ebay one should be fine.
Husky. :? Thinking outside of the box is better than sitting in a dark one.
:-D
Top
User avatar
CitroJim
A very naughty boy
Posts: 54538
Joined: 30 Apr 2005, 23:33
x 8076

Re: Xantia H.D.i. 2.0L

Unread post by CitroJim »

As a temporary fix Steve, when I had exactly the same happen on my last AX, I very successfully glued it all back together with superglue gel.

It lasted long enough that I forgot all about it and as far as I'm aware, it's still in one piece in the hands of its new owner...
Jim

A bit of a Citroen AX fan...
Top
admiral51
(Donor 2023)
Posts: 2655
Joined: 24 May 2007, 10:11
x 389

Re: Xantia H.D.i. 2.0L

Unread post by admiral51 »

Steve be aware the old one may be biblically tight even if it rotates on the spline and removal is pulling it upwards off the stick.

Do not look down at the gear knob whilst pulling it off the stick if you like your teeth and face as it is now :rofl2:

Colin
Top
User avatar
myglaren
Forum Admin Team
Posts: 28426
Joined: 02 Mar 2008, 13:30
x 5577

Re: Xantia H.D.i. 2.0L

Unread post by myglaren »

is it worth, or even possible, to put the 'C' of a combination spanner around the gear stick and whack it upwards while maintaining some distance from it?
Top
stevestix8
Posts: 151
Joined: 06 Jul 2010, 20:34
x 13

Re: Xantia H.D.i. 2.0L

Unread post by stevestix8 »

Hi All,

Thanks for responses, lol, was a bit of a lame thing to post about.

Have taken the advice and glued the bits of the old 1 back together for now, will get a new 1 in time.

Is worth keeping the car going, I looked on the 'How many left' website today and according to that the Citroen Xantia 2.0L SX has only 8 left licensed and still on the road, nice.

Cheers again,

Steve
Top

Return to “Citroën”