2.7 oil pressure warning
-
Kenmac15
- (Donor 2022)
- Posts: 40
- Joined: 02 Jan 2021, 01:09
- x 4
2.7 oil pressure warning
Oh another day & another issue.......... had the low oil pressure warning pop up Monday after fixing the alternator & had a look & the pressure switch was leaking a lot & looked like for a while Diagbox showed the sensor had a fault. Ordered a new one from Parts in Motion & fitted it today, cleared the fault. Guess what with the new sensor fitted it's still showing the warning & fault. How many sensors are there for the oil pressure side of the system ???
Ken
“I have not failed. I've just found 10,000 ways that won't work.”
“I have not failed. I've just found 10,000 ways that won't work.”
-
GiveMeABreak
- (Donor 2016)
- Posts: 42019
- Joined: 15 Sep 2015, 19:38
- x 6955
Re: 2.7 oil pressure warning
Just the one, item (8), part 1131H8, (DIAM 13,7X21 LG 89 GREEN), £55.28 for an OEM one.
I can only suggest the replacement part may be duff.
I can only suggest the replacement part may be duff.
Please note, I'm no longer active on the Forum, so won't respond to messages.
Marc
Marc
-
Kenmac15
- (Donor 2022)
- Posts: 40
- Joined: 02 Jan 2021, 01:09
- x 4
Re: 2.7 oil pressure warning
Oh good god not againGiveMeABreak wrote: 19 Oct 2022, 16:54 Just the one, item (8), part 1131H8, (DIAM 13,7X21 LG 89 GREEN), £55.28 for an OEM one.
I can only suggest the replacement part may be duff.
Ken
“I have not failed. I've just found 10,000 ways that won't work.”
“I have not failed. I've just found 10,000 ways that won't work.”
-
Kenmac15
- (Donor 2022)
- Posts: 40
- Joined: 02 Jan 2021, 01:09
- x 4
Re: 2.7 oil pressure warning
Would anyone know what the pressure should be at tickover as ordered an oil pressure gauge & it'll be here tomorrow
Ken
“I have not failed. I've just found 10,000 ways that won't work.”
“I have not failed. I've just found 10,000 ways that won't work.”
-
Kenmac15
- (Donor 2022)
- Posts: 40
- Joined: 02 Jan 2021, 01:09
- x 4
Re: 2.7 oil pressure warning
Put a pressure tester on today and I've got 22psi at idle, does anyone know if that's OK for the 2.7
Ken
“I have not failed. I've just found 10,000 ways that won't work.”
“I have not failed. I've just found 10,000 ways that won't work.”
-
GiveMeABreak
- (Donor 2016)
- Posts: 42019
- Joined: 15 Sep 2015, 19:38
- x 6955
Re: 2.7 oil pressure warning
Oil Pressure
N.B. : Check the oil level with the engine cold.
CAUTION: Oil pressure is checked with the engine hot after checking the oil level (110 °C).
CAUTION: Carry out work on the engine if the oil pressure values are below those in the table.
N.B. : Check the oil level with the engine cold.
CAUTION: Oil pressure is checked with the engine hot after checking the oil level (110 °C).
| Engine speed | Minimum oil pressure |
| 2500 rpm | 1 bar minimum |
| 2500 rpm | 4 bars maximum |
Please note, I'm no longer active on the Forum, so won't respond to messages.
Marc
Marc
-
Kenmac15
- (Donor 2022)
- Posts: 40
- Joined: 02 Jan 2021, 01:09
- x 4
Re: 2.7 oil pressure warning
Cheers Marc
Ken
“I have not failed. I've just found 10,000 ways that won't work.”
“I have not failed. I've just found 10,000 ways that won't work.”