Hi all,
Im new to the forum and also new to my 2009 C5 vtr+
it had the pop out holes in the lower rear skirt for sensors so I ordered a set of plug and play sensors with their own module and buzzer, all I need is a live feed for power and a ground.
Can anyone tell me before I start ripping things apart I don't need to, the best way/place to get a live feed from the reverse lights?
TIA
retro fitting parking senors on C5
Moderator: RichardW
- GiveMeABreak
- Forum Admin Team
- Posts: 37005
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5646
Re: retro fitting parking senors on C5
You should not take any live feed from the lighting circuit. The only connection to the lighting circuit should be the reversing light signal. The original system would have a specific parking assistance module wired and fused into the vehicles' loom specifically for it to power the system and the sensors and going back to the BSI.
Obviously I can't advise with a third party unit - but I can tell you Citroen do supply and fit aftermarket reversing sensors. They would at least wire it correctly for you.
Obviously I can't advise with a third party unit - but I can tell you Citroen do supply and fit aftermarket reversing sensors. They would at least wire it correctly for you.
Please Don't PM Me For Technical Help
Marc
Marc
-
- (Donor 2020)
- Posts: 130
- Joined: 27 Apr 2020, 08:07
- Location: Tasmania
- Lexia Available: Yes
- My Cars: Daihatsu Rocky diesel 1984
2013 Citroen DS5 THP165
2011 DS3 THP 150 - x 13
Re: retro fitting parking senors on C5
I have not had any issues connecting the power lead for the reversing sensor module to the wire going to the reverse light bulb in two such installations- a 2005 C4 and a 2007 207CC.
- GiveMeABreak
- Forum Admin Team
- Posts: 37005
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5646
Re: retro fitting parking senors on C5
I just mentioned it as we have no way of knowing what system he has fitted and what the power requirements are. Anything like this should ideally be properly wired and fused with only the reversing light signal taken from the reversing light wire. I've seen melted housings caused by accessories poorly fitted and not separately supplied and fused, hence why I mentioned it.
Please Don't PM Me For Technical Help
Marc
Marc